Stanley Proto J1073M 12 Point Metric Offset Box Wrench 22 X 24mm
- Full polish finish provides corrosion resistance and easy to clean surfaces. Box ends incorporate the torqueplus system. Ideal for use on stubborn or damaged fasteners. 12 point box end allows for fine indexing, helping to improve speed and access fits 4, 6 and 12 point fasteners. Offset box end allows access to recessed fasteners and keeps hands clear of obstructions.
Stanley Proto J3572 Thin Pattern Service Wrench 2-1/4″
- Features satin finish provides corrosion resistance and a slip resistant grip. Thin pattern for use on jam nuts, check nuts or lock nuts. Short shank allows for use in confined spaces. 30 angle head allows access to difficult to reach fasteners. .
Stanley Proto J6016C 1/2-Inch Drive Ratcheting Head Micrometer Torque Wrench, 30-150-Feet Pound
- Calibration is accomplished by manual loading the torque wrenches. -Lbs calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full scale. Stanley j6016c proto 1/2-inch drive ratcheting head micrometer torque wrench 30-150 ft. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance.
Stanley Proto JC497 Proto Adjustable Pin Spanner Wrench
- Stanley jc497 proto adjustable pin spanner wrench 2-inch to 4-3/4-inch, 1/4-inch pin non-reflective black oxide finish for use where non-plated products are required. . Precision machined pins provide engagement with side holes or slots. Used to tighten side slot nuts on collars, lock nuts and bearings.
Stanley Proto J1061M 12 Point Metric Offset Box Wrench 14 X 15mm
- Box ends incorporate the torqueplus system. Full polish finish provides corrosion resistance and easy to clean surfaces. Offset box end allows access to recessed fasteners and keeps hands clear of obstructions. 12 point box end allows for fine indexing, helping to improve speed and access fits 4, 6 and 12 point fasteners. Ideal for use on stubborn or damaged fasteners.
Stanley Proto J1200F-MASD 15 Piece 12 Point Metric Combination Wrench Set
- Set includes 7mm through 21mm wrenches and tool roll. Satin finish provides corrosion resistance and a slip resistant grip. Anti-slip design (asd) open end. Wrench self-aligns on the fastener which helps save time. Proto torqueplus wrenches are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials.
Stanley Proto JSCV-20S Proto 20-Piece Black Chrome Reversible Combination Ratcheting Wrench
- Fractional spline wrenches can be used on fractional 4, 6, 12 point, spline and torx fasteners. Black chrome finish is corrosion resistant and visually distinctive. The chrome-vanadium switch lever allows for easy changes in turning direction which helps improve speed. Anti-slip design (asd) open end. 15-degree angled offset box end helps keep shank clear of obstructions.
Stanley Proto J1000G-500 7 Piece 12 Point Offset Box Wrench Set
- Box ends incorporate the torqueplus system. Offset box end allows access to recessed fasteners and keeps hands clear of obstructions. Ideal for use on stubborn or damaged fasteners. Has 12 point box end that allows for fine indexing which fits 4, 6 and 12 point fasteners.
Stanley Proto J3435 Open End Wrench 11/16 X 3/4, Thin
- 15° angle heads. Finish provides corrosion resistance and a slip resistant grip. Easy to clean surfaces. Special heat-treated alloy steel permits slim shanks for strength and durability.
Stanley Proto J1200FBASD Combination Wrench Set, ProtoBlack, 14-Piece, 12 Point
- Anti-slip design (asd) open end. Proto torqueplus wrenches are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials. Wrench self-aligns on the fastener which helps save time. Non-reflective black oxide finish for use where non-plated products are required. Set includes 3/8″ 7/16″ 1/2″ 9/16″ 5/8″ 11/16″ 3/4″ 13/16″ 7/8″ 15/16″ 1″ 1-1/16″ 1-1/8″ and 1-1/4″.
Stanley Proto J1125LB ProtoBlack 12 Point Box Wrench 7/16 X 1/2
- Ideal for use on stubborn or damaged fasteners. Box ends incorporate the torqueplus system. 14 point box end allows for fine indexing, helping to improve speed and access fits 4, 6 and 12 point fasteners. Special alloy steel and heat treat permits thin box walls for strength and durability. Non-reflective protoblack finish for use where non-plated products are required.
Stanley Proto J6020AB 3/4-Inch Drive Ratcheting Head Micrometer Torque Wrench, 120-600-Feet Pound
- Stanley j6020ab proto 3/4-inch drive ratcheting head micrometer torque wrench 120-600 ft-lbs calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full scale. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance. Calibration is accomplished by manual loading the torque wrenches.
Stanley Proto J2620SW Heavy Duty 12 Point Offset Striking Wrench 1-1/4 Inch
- Black oxide finish. Heavy box walls provide greater torque transmission. Offset handle clears obstructions. For use where extreme force is necessary to loosen or set large fasteners. Large striking surface for surer blow contact and more efficient transmittal of force to fastener.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
