Carbide Tipped 2-Flute Straight Router Bits; OD 3/8″; Flute Length 1″; Shank Dia 1/2″; OAL 2-7/8″; Bright; in a Tube
- Superior geometric and anti-kick design provides clean cuts. Cuts all composition materials, plywood, hardwood, and soft wood. Use on hand-hold and table-mounted routers. Superior quality carbide tips make tools outstanding wear resistance and extend tool life. Superior quality tool steel body with fine treatment.
Carbide Tipped 2-Flute Straight Flush Trim Router Bits with 0.375″ Bearing Guide; OD 3/8″; Flute Length 1″; Shank Dia 1/4″; OAL 2-5/8″; Bright; in a Tube
- Superior quality tool steel body with fine treatment. Cuts all composition materials, plywood, hardwood, and soft wood. Use on hand-hold and table-mounted routers. Superior geometric and anti-kick design provides clean cuts. Superior quality carbide tips make tools outstanding wear resistance and extend tool life.
uxcell® 1/2″ Shank 5/16″ Cutting Dia 2 Flutes Straight Flush Trim Router Bit
- Cutting depth 38mm / 15″total length 91mm / 36″. Shank diameter 127mm / 1/2″cutting diameter 8mm/5/16″. Product name flush trim bitstandard 1/2″ x 5/16″bearng diameter 8mm/031″. Net weight 60gpackage content 1 x flush trim bit. Material metalcolor silver tone, gray.
EnPointâ„¢ Woodworking Carbide 2-Flute Straight Grooving End Mill 15/64″ 6mm Shank 6mm Cut Dia 22mm Flute Precision Ground Straight Router Bit CNC Engraving Tool Bit for Joinery MDF Panel
- There is a 5 degree slope with the chip groove, which is conductive to chip evacuation. Produced from a premium ultra-fine nano grade solid carbide for maximum tool strength and durability. Used for engraving and cutting a wide variety of materials bubble teflon plate, acrylic, fiber board, plywood, multilayer board, solid wood, sandwich panels and pvc etc. Designed with 2 carbide flutes, it has precision ground for the smoothest possible cuts. High precision grinding and excellent surface finish a long cutting life with minimal sharpening, and also capable of cutting mortises.
Kodiak Cutting Tools KCT140314 USA Made Solid Carbide Drill Bit, 2 Straight Flute, 7/8″ Length of Cut, 2″ Overall Length, 3/16″ Diameter
- . 3/16 inch diameter solid carbide drill, straight flute 7/8″ length of cut 2″ overall length 2 flute straight flute drill bit, carbide.
EnPointâ„¢ Carbide Bottom Ball Bearing 2-Flute Straight Flush Trim Plunge Router Bit 1/4″ Shank 1/2″ Cut Dia 1-3/16″ Cut Length CNC Rosewood Plywood Laminate Template Pattern Routing Cutter
- The bearing sets away from the cutter and doesn’t get fouled with chips and adhesive and overheat. Trimmed in both directions, 2 flutes providing fast, smooth cuts and good finishes. Used it for making solid surface counter top both free hand-held and in a table-mounted routers. Carbide cutting edges produce a very smooth, clean finish that rarely requires sanding to finish. Mainly for high hardness of wood, such as solid wood panles, flakeboard, red oak, mdf and laminate.
Freud 12-100 1/4-Inch Diameter by 3/4-Inch Double Flute Straight Router Bit with 1/2-Inch Shank
- Covered by freud’s limited lifetime warranty. Individually computer balanced. Precision ground for the smoothest cuts. Kickback reducing design.
EnPointâ„¢ Carbide Bottom Ball Bearing 2-Flute Straight Flush Trim Plunge Router Bit 1/2″ Shank 3/8″ Cut Dia 1-3/16″ Cut Length CNC Rosewood Plywood Laminate Template Pattern Routing Cutter
- The bearing sets away from the cutter and doesn’t get fouled with chips and adhesive and overheat. Used it for making solid surface counter top both free hand-held and in a table-mounted routers. Carbide cutting edges produce a very smooth, clean finish that rarely requires sanding to finish. Trimmed in both directions, 2 flutes providing fast, smooth cuts and good finishes. Mainly for high hardness of wood, such as solid wood panles, flakeboard, red oak, mdf and laminate.
EnPointâ„¢ Woodworking Carbide 2-Flute Straight Grooving Milling Bit 1/8″ Shank 1/8″ Cutter Dia 22mm Flute length Precision Ground Straight Bits Cutting Joinery Grooves Rabbets CNC Engraving Tool Bit for Acrylic PVC MDF Plywood Solid Wood Panels
- Used for engraving and cutting a wide variety of materials bubble teflon plate, acrylic, fiber board, plywood, multilayer board, solid wood, sandwich panels and pvc etc. Produced from a premium ultra-fine nano grade solid carbide for maximum tool strength and durability. High precision grinding and excellent surface finish long cutting life with minimal sharpening, and also capable of cutting mortises. Designed with 2 carbide flutes, it has precision ground for the smoothest possible cuts. There is a 5 degree slope with the chip groove, which is conductive to chip evacuation.
25/32 2-Flute Straight Plunge Cutting Router Bit–1/2 Shank by Amana
- Superior geometric and anti-kick design provides clean cuts. 25/32 2-flute straight plunge cutting router bit–1/2 shank. Superior quality carbide tips make tools outstanding wear resistance and extend tool life. Use on hand-hold and table-mounted routers. Cuts all composition materials, plywood, hardwood, and soft wood.
uxcell Woodwork 1/4″ x 1/4″ Sharp Edge 2 Flute Straight Router Bit
- Shank diameter 635mm / 1/4”flute length 25mm / 1”. Product name straight router bitcutting diameter(approx) 635mm / 1/4”. Material metalcolor silver tone & red. Cutting depth 19mmtotal length 65cm / 26”. Net weight 25gpackage content 1 x straight router bit.
BQLZR 4mm High Speed Steel 2 Flutes with Straight Shank End Mill Metalworking Tool Parts Pack of 5
- It is made of high speed steel,an important fittings for your device. It is 2 flutes and consumes less power with speedy cutting. Safety instructions razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed the bladed product is not use for people under 18 years the item is only use for industrial cutting/engraving, not hazardous article. It is applied to process stainless steel,die steel,spring steel and alloy steel,it also fits for metalworking like iron,copper and aluminum processing.
uxcell 1/4″ Shank 1/2″ Cutting Dia 2 Flutes Straight Flush Trim Bit 2pcs
- Material hsscolor silver gray. Shank diameter 63mm / 1/4″cutting diameter 127mm / 1/2″. Product name flush trim bitstandard 1/4″ x 1/2″bearing diameter 127mm / 1/2″. Net weight 64gpackage content 2 x flush trim bit2 x hard plastic case. Cutting depth 25mm / 1″total length 68mm / 27″.
uxcell 5/64″ x 15/64″ 2 Flute Straight Shank Milling Cutter Endmill
- Total length 51mm/2″color as picture shown. Spec 2 flutecutting diameter 2mm/ 5/64″. Cutting depth 7mm/027″shank diameter 6mm/ 15/64″. Product name end millmaterial hss. Weight 12gpackage content 1 x straight shank end mill.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
