Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)
- They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. .
Zodiac C76 10-32-Thread by 7/8-Inch Stainless Steel Pan Head Screw Replacement
- Measures 10-32-thread by 7/8-inches. . Made of stainless steel. This pan head screw is compatible with zodiac polaris pool cleaner models 280, 280 tanktrax, vac-sweep 280. This product weighs 1 pounds.
410 Stainless Steel Thread Rolling Screw for Metal, Passivated Finish, Hex Washer Head, #10-32 Thread Size, 1/2″ Length (Pack of 25)
- Passivated finish enhances the natural corrosion resistance of stainless steel. Hex washer head has a nonserrated flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side. Thread rolling screw recommended for use in metal. 410 stainless steel has high strength and hardness, and resists corrosion in mild environments.
Nylon 6/6 Pan Head Machine Screw, Off-White, Slotted Drive, #10-32 Thread Size, 1/2″ Length, Fully Threaded, USA Made (Pack of 100)
- Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. Made in usa. Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials. 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating. Hex socket drive has a hexagonal slot that turns using an allen key driver.
Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1-1/4″ Length, Fully Threaded, Imported (Pack of 50)
- 18-8 stainless steel provides good corrosion resistance and strength. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Plain surface has no finish or coating. Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1″ Length, Fully Threaded, Import (Pack of 100)
- They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.
18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1″ Grip Length, Made in US (Pack of 1)
- Hex socket drive has a hexagonal slot that turns using an allen key driver. 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating. Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. Made in usa. Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials.
Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, T25 Star Drive, #10-32 Thread Size, 1-1/4″ Length, Fully Threaded, Imported (Pack of 50)
- Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Black oxide finish offers mild corrosion resistance and lubricity. Steel is often used in applications where strength is the primary consideration. Pan head has a flat top and short vertical sides with a rounded top edge.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1/4″ Length, Fully Threaded, Import (Pack of 100)
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 05-inches thread length.
Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 3-1/2″ Length, Fully Threaded, Imported (Pack of 25)
- Zinc plating resists corrosion and has a reflective appearance. Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening and has six flat sides that a wrench can grip to turn from the side. Thread rolling screw recommended for use in metal. Steel is often used in applications where strength is the primary consideration.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 3/8″ Length, Fully Threaded, Import (Pack of 100)
- Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw.
Steel Thread Rolling Screw for Metal, Black Oxide Finish, Pan Head, Star Drive, #10-32 Thread Size, 3/8″ Length (Pack of 100)
- Thread rolling screw recommended for use in metal. Steel is often used in applications where strength is the primary consideration. Black oxide finish offers mild corrosion resistance and lubricity. Pan head has a flat top and short vertical sides with a rounded top edge. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.
RUBBER-NUT THREADED INSERTS, 10-32 THREAD SIZE, .312-.643 GRIP RANGE (PACK OF 10)
- No installation tools required / easy one-step installation. Helps prevent galvanic corrosion / seals out ambient moisture. Blind, install from one side. 10-32 thread size. Dampens vibration & shock / muffles noise.
Steel Thread Cutting Screw, Black Zinc Plated, Pan Head, Phillips Drive, Type 23, #10-32 Thread Size, 3/4″ Length (Pack of 50)
- Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a black reflective appearance.
18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1-1/8″ Grip Length, Made in US (Pack of 1)
- Hex socket drive has a hexagonal slot that turns using an allen key driver. Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials. Made in usa. 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
