15 Greatest Cutting Bits

 

SpeTool Carbide Rotary Cutting Bit Burr Tapered Radius 14-Inch6mm SL-5M 1630MM

SpeTool Carbide Rotary Cutting Bit Burr Tapered Radius 1/4-Inch(6mm), SL-5M (1630MM)

SpeTool Carbide Rotary Cutting Bit Burr Tapered Radius 1/4-Inch(6mm), SL-5M (1630MM) - Taper radius model l163006, scti sl-5m, head size 1630mm, single side degree 14 deg, over all length 74mm, shank diameter 6mm, double cut. Double cut for efficient stock removal creates a small chip for excellent operator control. Wide range of uses includes body shops, fabrication shops, brake shops, industrial shops, die manufacturers. Great for deburring, sculpting and removing material in hard to reach areas. Designed for use on ferrous metals, plastic, fiberglass and other machinable materials.

 

Dremel Multi-Purpose Cutting Bit 18 Shank by Dremel

Dremel Multi-Purpose Cutting Bit 1/8 Shank by Dremel

Dremel Multi-Purpose Cutting Bit 1/8 Shank by Dremel - Package1 pack of 8 pieces endmills. Dremel multi-purpose cutting bit 1/8 shank. Materialtungsten carbide,high quality tialn coating,getting long tool life. Contains 8pcs square endmills05/1/15/2/25/3/4/6mm blade diameter. Suitable for process copply,alloy,iron and steel under hrc55(hra78).

 

Lukcase 18 Inch Shank 2 Flutes Router Bit Carbide Ball Nose End Mills 17mm 2 Flute CNC Cutting Tool

Lukcase® 1/8 Inch Shank 2 Flutes Router Bit Carbide Ball Nose End Mills 17mm 2 Flute CNC Cutting Tool

Lukcase® 1/8 Inch Shank 2 Flutes Router Bit Carbide Ball Nose End Mills 17mm 2 Flute CNC Cutting Tool - 175mm (1/8″) cutting edge length (flute length) 17mm total length 38mm quantity 1 box /10pcs features high-density polished, wear-resistant, high temperature. If the chuck works with vibration, reduce the feeding speed to check if there is something wrong with chuck or fixture. Using tips lower the cutter grasper as far as possble. Package includes 10 x ball nose end mills. High cost-effective, improve efficiency. Note please allow a bit hand measuring errors of 0-2mm. Specification material carbide number of flutes 2 flute cutting diameter 3. Can be engraved copper, aluminum ,abs, acrylic, pvc, nylon, resin, most plastics ect. 175mm (1/8″) shank diameter 3. Mainly used in cutting and engraving. Come to move slowly and accelerate gradually, but the move should not be too fast.

 

Wokesi 10Pcs 14 6mmCutting Dia3mmShank DiaTungsten Carbide Rotary Burr Set Taper Points Head Fit Dremel Engraving Bits Burrs Grinding Engraving Tools for DIY Woodworking Rubber PlasticsMixed

Wokesi 10Pcs 1/4” (6mm)Cutting Dia,3mmShank Dia,Tungsten Carbide Rotary Burr Set Taper Points Head Fit Dremel Engraving Bits Burrs Grinding Engraving Tools for DIY Woodworking Rubber Plastics(Mixed)

Wokesi 10Pcs 1/4” (6mm)Cutting Dia,3mmShank Dia,Tungsten Carbide Rotary Burr Set Taper Points Head Fit Dremel Engraving Bits Burrs Grinding Engraving Tools for DIY Woodworking Rubber Plastics(Mixed) - Materialhigh-quality tungsten carbide,long tool life. High micro hardness,high abrasion resistance,good toughness. Package10pcs mixed burr set. Most suitable for process rubber,plaster,wood,copper,aluminum and jade etc. Cutting diameter=1/4”(6mm),shank diameter=3mm(appox1/8”),oal=40mm.

 

SpeTool Rotary Burr Cutting Bit Cone 60Deg 14 Inch Shank SJ-6M 16145MM

SpeTool Rotary Burr Cutting Bit Cone 60Deg 1/4 Inch Shank, SJ-6M (1614.5MM)

SpeTool Rotary Burr Cutting Bit Cone 60Deg 1/4 Inch Shank, SJ-6M (1614.5MM) - Great for deburring, sculpting and removing material in hard to reach areas. Cone 60deg model j161406, scti sj-6m, head size 16145mm, over all length 63mm, shank diameter 6mm, double cut. Double cut for efficient stock removal creates a small chip for excellent operator control. Designed for use on ferrous metals, plastic, fiberglass and other machinable materials. Wide range of uses includes body shops, fabrication shops, brake shops, industrial shops, die manufacturers.

 

Harbor Freight Tools Pack of 10 AR-6-RH Carbide Tipped Lathe Cutting Bits

Harbor Freight Tools Pack of 10 AR-6-RH Carbide Tipped Lathe Cutting Bits

Harbor Freight Tools Pack of 10 AR-6-RH Carbide Tipped Lathe Cutting Bits - Lathe bits for a variety of general machining operations get the most out of your lathe with these versatile lathe bits, visit harbor freight tools for more information. .

 

Dremel 560 Drywall Cutting Bit

Dremel 560 Drywall Cutting Bit

Dremel 560 Drywall Cutting Bit - Steel shank cutter. Do not run in excess of 30,000 rpm. Cuts drywall, vents, etc. 1/8″ shank. Easy to use. The product is manufactured in china. The product is dry cut bit.

 

Wokesi Pack of 805115225346mm Blade DiameterSquare Nose End Mill Set4 FluteHRC55TiAlN CoatedSolid Tungsten CarbideRouter Bits Cutting Milling Tools05115225346mm HRC55

Wokesi Pack of 8,0.5/1/1.5/2/2.5/3/4/6mm Blade Diameter,Square Nose End Mill Set,4 Flute,HRC55,TiAlN Coated,Solid Tungsten Carbide,Router Bits Cutting Milling Tools(0.5/1/1.5/2/2.5/3/4/6mm HRC55)

Wokesi Pack of 8,0.5/1/1.5/2/2.5/3/4/6mm Blade Diameter,Square Nose End Mill Set,4 Flute,HRC55,TiAlN Coated,Solid Tungsten Carbide,Router Bits Cutting Milling Tools(0.5/1/1.5/2/2.5/3/4/6mm HRC55) - Contains 8pcs square endmills05/1/15/2/25/3/4/6mm blade diameter. Package1 pack of 8 pieces endmills. High micro hardness,high abrasion resistance,good toughness. Materialtungsten carbide,high quality tialn coating,getting long tool life. Suitable for process copply,alloy,iron and steel under hrc55(hra78).

 

WoodRiver Pattern Cutting Bit 12 Diameter x 1 Cutting Length

WoodRiver Pattern Cutting Bit 1/2″ Diameter x 1″ Cutting Length

WoodRiver Pattern Cutting Bit 1/2″ Diameter x 1″ Cutting Length - Put your pattern on top of the wood and see your cut. The anti-kickback design of these industrial quality carbide router bits limits stock feed rate for safer router operations. High quality japanese bearings are used on bits fitted with guide bearings. Solid steel bodies are precision machined to carefully controlled tolerances. For following templates. This bit is carbide tipped. Bit bodies are coated to help prevent resin build up and make resin removal easier. A final cnc machine 600 grit wet grind on the k-20 german carbide produces a clean, extremely sharp, and durable cutting edge. Two flutes, same diameter cutter and bearing.

 

MultiPurpose Cutting Bit

MultiPurpose Cutting Bit

MultiPurpose Cutting Bit - Ideal for shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes. . You can also create decorative wall tile by cutting a design, such as a sailboat, and filling it with colored grout.

 

uxcell 2PCS 14mm Diamond Cutting Bit Granite Marble Stone Tile Glass Hole Saw

uxcell® 2PCS 14mm Diamond Cutting Bit Granite Marble Stone Tile Glass Hole Saw

uxcell® 2PCS 14mm Diamond Cutting Bit Granite Marble Stone Tile Glass Hole Saw - Silver tone metal glass hole saw, diamond coated cutting hole, great for making clean and accurate hole on glass and tile. Suitable for drilling marble, tile, ceramic, glass, porcelain, granite, stone, ideal replacement for the old or damaged ones. Works better with an electric drill (here is not included).

 

WPS Tungsten Carbide Cutting Bits - 38in Ball Head - 14in Shank SGS 19038

WPS Tungsten Carbide Cutting Bits – 3/8in. Ball Head – 1/4in. Shank SGS 19038

WPS Tungsten Carbide Cutting Bits – 3/8in. Ball Head – 1/4in. Shank SGS 19038 - Made for cutting aluminum. Tungsten carbide cutting bits.

 

DN Two Flute Spiral Cutter 18 Engraving Cutting Bit Wood Acrylic Drill Pack of 10

DN Two Flute Spiral Cutter 1/8″ Engraving Cutting Bit Wood Acrylic Drill (Pack of 10)

DN Two Flute Spiral Cutter 1/8″ Engraving Cutting Bit Wood Acrylic Drill (Pack of 10) - 5inch weight 40g package includes 10 x cnc router bits ∗dn∗ brand manufactures tools for drilling, threading, and milling applications, drill bits and accessories, reamers, countersinks, and blanks. The company, founded in 1890 and headquartered in hk, meets international organization for standardization (iso) standard 9001. Note the color of the item may vary slightly due to photography and your own computer suitable for rosewood, plywood, mdf, pvc, solid wood, wood board drilling and cutting work,sign label, name plate, special cut on acrylic abs, double color plate specification shank diameter 3. 175mm cutting edge diameter2mm cutting edge length 12mm material solid carbide over length1.

 

Millrose 73025 Plastic Pipe Cutting Bit Quick Cutter

Millrose 73025 Plastic Pipe Cutting Bit Quick Cutter

Millrose 73025 Plastic Pipe Cutting Bit Quick Cutter - The zinc plated dichromate dipped shank has a 1/4″ hex shank for a secure grip. The quick and easy way to cut pipe from the inside. It will cut wood for sink rims, closet flanges, shower drains, bath waste and overflow. This tool quickly cuts through plastic pvc and abs pipe. The strong steel blade is heat treated for longer wear. It is great for hard to reach applications.

 

Shark 903-6  RelsVan Norman Positive Rake Rotor Cutting Bit 6-Pack

Shark 903-6 Rels/Van Norman Positive Rake Rotor Cutting Bit, 6-Pack

Shark 903-6 Rels/Van Norman Positive Rake Rotor Cutting Bit, 6-Pack - Use on models 204c,204d,204s,205dc and 415 disc cutting lathes. Oem # 29687v, 866561. Rels/van norman positive rake rotor cutting bit. Cutting edges 3. Shark toolholders are guaranteed to perform as good as any oem toolholder. Made to exacting standards, we offer an alternative to oem without excessive cost. Van norman 243xv new drum/rotor lathes and some snap-on.