16 Best and Coolest Upcuts

 

LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 1 Flute 15000 Overall Length 00625 Cutting Diameter 01250 Shank Diameter

LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 1.5000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 1.5000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter - Single flute, 22 degree angle. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Infinity Tools 85-105 14 Shank Upcut Spiral Router Bit 316 Cutter Diam 34 Cutter Height

Infinity Tools 85-105, 1/4″ Shank Upcut Spiral Router Bit, 3/16″ Cutter Diam., 3/4″ Cutter Height

Infinity Tools 85-105, 1/4″ Shank Upcut Spiral Router Bit, 3/16″ Cutter Diam., 3/4″ Cutter Height - These are you best choice for cutting grooves or dadoes in tough material like particleboard, melamine and other abrasive materials. Our solid carbide spiral bits provide remarkable performance and durability. Manufactured using state-of-the-art computer controlled machinery these micro-grain carbide cutters feature our optimal helix design and last up to 300% longer than regular router bits.

 

CMT 19900811 Solid Carbide Upcut Ball Nose Spiral Bit with 14-Inch Diameter with  14-Inch Shank

CMT 199.008.11 Solid Carbide Upcut Ball Nose Spiral Bit with 1/4-Inch Diameter with 1/4-Inch Shank

CMT 199.008.11 Solid Carbide Upcut Ball Nose Spiral Bit with 1/4-Inch Diameter with 1/4-Inch Shank - High feed speed on well-clamped workpiece. Premium quality super-micrograin carbide, 2 upcut spiral cutting edges. For cutting, copying, panel sizing and any routing applications in solid wood or wood composites. 1/4-inch diameter, 1-inch cutting length, 1/4-inch-shank. Use on machining centers, point/point machines, cnc routers & handheld routers with chucks/adaptors.

 

Eagle America 106-0202 Solid Carbide Spiral Upcut Router Bit 18-Inch Diameter 14-Inch Shank

Eagle America 106-0202 Solid Carbide Spiral Upcut Router Bit 1/8-Inch Diameter 1/4-Inch Shank

Eagle America 106-0202 Solid Carbide Spiral Upcut Router Bit 1/8-Inch Diameter 1/4-Inch Shank - Up-cut bits provide faster cutting while they pull chips up and out of the work or towards the router. Spiral router bits come in several configurations. Our production quality spiral bits combine effective chip removal with a continuous shearing action cut which cannot be obtained from a standard straight bit. You’ll get smoother cutting action with better results guaranteed 1/8-inchdiameter, 1/2-inch cut length, 2-inch overall length, 1/4-inch shank.

 

Amana Tool 14Dx14Shk Upcut Plastic - 51444

Amana Tool 1/4″Dx1/4″Shk Upcut Plastic – 51444

Amana Tool 1/4″Dx1/4″Shk Upcut Plastic – 51444 - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Single flute, 21 degree angle.

 

CMT 19150711B Solid Carbide Upcut Spiral Flush Trim Bit 12-Inch

CMT 191.507.11B Solid Carbide Upcut Spiral Flush Trim Bit, 1/2-Inch

CMT 191.507.11B Solid Carbide Upcut Spiral Flush Trim Bit, 1/2-Inch - Bit runs cooler and the edges will stay sharper, last longer and increases your shop productivity. 2-inch cutting length, 4-inch overall length. 2 cutting edges for cutting, copying, sizing and routing wood products, plastic & laminates. Sheer wood and wood products cleanly more efficient chip ejection than standard flush trim bits. Premium quality solid carbide excellent finish on the lower side of the workpiece.

 

CMT 19200002 5-Piece Upcut Spiral Bit Set 12-Inch Shank

CMT 192.000.02 5-Piece Upcut Spiral Bit Set, 1/2-Inch Shank

CMT 192.000.02 5-Piece Upcut Spiral Bit Set, 1/2-Inch Shank - To be used either in cnc-machines or hand-held routers. 3/16, 1/4, 5/16, 3/8 and 1/2-inch diameters. 2 cutting edges, right hand rotation. Ideal for use on all soft and hard wood, plywood, laminates, mdf and plastic materials. Includes 5 downcut solid carbide spiral bits featuring either 1/4-inch or 1/2-inch shank.

 

CMT 19150311 Solid Carbide Upcut Spiral Bit 38-Inch Diameter by 3-Inch Length 12-Inch Shank

CMT 191.503.11 Solid Carbide Upcut Spiral Bit, 3/8-Inch Diameter by 3-Inch Length, 1/2-Inch Shank

CMT 191.503.11 Solid Carbide Upcut Spiral Bit, 3/8-Inch Diameter by 3-Inch Length, 1/2-Inch Shank - For cutting, copying, sizing and routing wood products, plastic & laminates. For use on machining centers, point to point machines, cnc routers. 1-1/4-inch cutting length, 2 cutting edges, right-hand rotation. Premium quality solid carbide, excellent finish on the workpiece lower side upward chip ejection. Also for use on hand-held routers equipped with chucks or adaptors.

 

LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 00625 Cutting Diameter 01250 Shank Diameter

LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter - Single flute, 21 degree angle. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

CMT 19100811 Solid Carbide Upcut Spiral Bit 14-Inch Diameter by 2-12-Inch Length 14-Inch Shank

CMT 191.008.11 Solid Carbide Upcut Spiral Bit, 1/4-Inch Diameter by 2-1/2-Inch Length, 1/4-Inch Shank

CMT 191.008.11 Solid Carbide Upcut Spiral Bit, 1/4-Inch Diameter by 2-1/2-Inch Length, 1/4-Inch Shank - For cutting, copying, sizing and routing wood products, plastic & laminates. Also for use on hand-held routers equipped with chucks or adaptors. 1-inch cutting length, 2 cutting edges, right-hand rotation. For use on machining centers, point to point machines, cnc routers. Premium quality solid carbide, excellent finish on the workpiece lower side upward chip ejection.

 

LMT Onsrud 52-240 Solid Carbide Upcut Spiral Wood Rout Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 20000 Overall Length 01250 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 52-240 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 52-240 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter - Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Double flute, 30 degree angle.

 

50x T101B 4 100mm T-shank Upcut Jig Saw Blades fits Bosch HCS Wood Cutting

50x T101B 4″ 100mm T-shank Upcut Jig Saw Blades fits Bosch HCS Wood Cutting

50x T101B 4″ 100mm T-shank Upcut Jig Saw Blades fits Bosch HCS Wood Cutting - Pack of 50 101b upcut jig saw blades. Blade length 4″, 10 tpi. Blade type 101b t-shank. Material cut wood, blade material hcs. Color silver-metallic finish.

 

CMT 19100811B Solid Carbide Upcut Spiral Flush Trim Bit 14-Inch

CMT 191.008.11B Solid Carbide Upcut Spiral Flush Trim Bit, 1/4-Inch

CMT 191.008.11B Solid Carbide Upcut Spiral Flush Trim Bit, 1/4-Inch - Premium quality solid carbide excellent finish on the lower side of the workpiece. 1-inch cutting length, 3-inch overall length. Bit runs cooler and the edges will stay sharper, last longer and increases your shop productivity. Sheer wood and wood products cleanly more efficient chip ejection than standard flush trim bits. 2 cutting edges for cutting, copying, sizing and routing wood products, plastic & laminates.

 

CMT 19100111 Solid Carbide Upcut Spiral Bit 18-Inch Diameter by 2-Inch Length 14-Inch Shank

CMT 191.001.11 Solid Carbide Upcut Spiral Bit, 1/8-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

CMT 191.001.11 Solid Carbide Upcut Spiral Bit, 1/8-Inch Diameter by 2-Inch Length, 1/4-Inch Shank - 1/2-inch cutting length, 2 cutting edges, right-hand rotation. For use on machining centers, point to point machines, cnc routers. Also for use on hand-held routers equipped with chucks or adaptors. For cutting, copying, sizing and routing wood products, plastic & laminates. Premium quality solid carbide, excellent finish on the workpiece lower side upward chip ejection.

 

CMT 19150511B Solid Carbide Upcut Spiral Flush Trim Bit 12-Inch

CMT 191.505.11B Solid Carbide Upcut Spiral Flush Trim Bit, 1/2-Inch

CMT 191.505.11B Solid Carbide Upcut Spiral Flush Trim Bit, 1/2-Inch - Sheer wood and wood products cleanly more efficient chip ejection than standard flush trim bits. 2 cutting edges for cutting, copying, sizing and routing wood products, plastic & laminates. 1-1/4-inch cutting length, 3-inch overall length. Premium quality solid carbide excellent finish on the lower side of the workpiece. Bit runs cooler and the edges will stay sharper, last longer and increases your shop productivity.

 

LMT Onsrud 63-618  Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 1 Flute 20000 Overall Length 01875 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 63-618 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 63-618 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter - Single flute, 22 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.