Onsrud TIN15-53 Single Edge HighSpeed Steel Dor-Bit – 1/2″CED, 2-1/2″CEL, 5-1/2″OAL 1/2″Shk, TI-Coat
- Tool geometry facilitates piercing steel & produces superior cut for door lites & hardware openings. Designed for use on special-purpose door lite machines at 2000 to 2500 rpm. Titanium coated without flat overall length, 5-1/2″. Cutting edge, 2-1/2″ shank, 1/2″.
LMT Onsrud 60-249 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Designed for perfect balance and ultra smooth finish over a wide speed range. Three flute, 10 degree angle.
LMT Onsrud 65-033 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Single flute, 21 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
LMT Onsrud 60-245 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Designed for perfect balance and ultra smooth finish over a wide speed range. Three flute, 10 degree angle. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
LMT Onsrud 37-03 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.010″ Tip Diameter, 60 Degree, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1)
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Single flute, 60 degree angle. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
LMT Onsrud 63-618 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter
- Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Single flute, 22 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Onsrud HSS Up-Cut Spiral Mortising Router Bit – 3/4” Dia x 1-1/4” H x 1/2” Shank
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Double flute, 30 degree angle.
LMT Onsrud 52-365 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Double flute, 30 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
LMT Onsrud 65-026 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Single flute, 21 degree angle. Round shanks allow use with a wide variety of toolholding systems.
LMT Onsrud 63-776 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter
- Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Single flute, 21 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
LMT Onsrud 62-727 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter
- Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. One flute, 21 degree angle.
LMT Onsrud 60-250 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter
- Designed for perfect balance and ultra smooth finish over a wide speed range. Three flute, 10 degree angle. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
LMT Onsrud 65-023 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter
- Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Single flute, 21 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
LMT Onsrud 62-712 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. One flute, 21 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
LMT Onsrud 65-020 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter
- Routing end mill, upcut spiral o-flute, high performance, number of flutes 1, single end, plunge point end style, center cutting type, right hand cut, carbide, uncoated finish, dia 3/16 in, shank dia 1/4 in, length of cut 1 1/4 in, overall length 3 in, cut angle 25 deg, helix angle 25 deg, for plastic, wood, aluminum, and solid surface.
LMT Onsrud 60-124MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter
- Double flute, 30 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
