Acogedor Bar Holder Set,SCLCR Lathe Boring Internal Turning Bar Holder with 10 Pcs Insert and 3Pcs Wrench.
- Please make sure you do not mind before you bid. 91” lead cutting angle 95 degree direction right hand notice 1. 2. Specifications shank d s07k-sclcr06 7mm/0. 46” overall l s07k-sclcr06 125mm/4. 39” s12m-sclcr06 12mm/0. Please allow 1-3cm error due to manual measurement. 92” s10k-sclcr06 125mm/4. 27” s10k-sclcr06 10mm/0. Package included 1 x s07k-sclcr06 boring bar 1 x s10k-sclcr06 boring bar 1 x s12m-sclcr06 boring bar 10 x ccmt0602 insert 3 x wrench. 92” s12m-sclcr06 150mm/5. The color may have different as the difference display, please understand.
HHIP 1001-0704 4 Piece 1/2 Inch Round Shank Indexable Boring Bar Set
- Positive rake 90 degrees lead, 7 degrees relief use tcmt inserts. 1/2″ shank. 4 piece set 1/2″ shank. Use tcmt inserts positive rake 90 degrees lead, 7 degrees relief.
MH GLOBAL 1” Shank Carbide Tipped 3” Boring Head Set 12 Pc 3/4” Boring Bar Set
- Case overall dimension 13 in l x 10 in w x 3 in h rough estimation shipping weight 14 pounds rough estimation. Qty 1 case included. For processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc. Tool set made of high quality steel with great match of hardness and toughness, thus prolonging its service life. 3″ size bore head with 1” shank boring head diameter 3/4” 1-1/2-18 (7/16) boring head thread 12 pc 3/4” boing bars included.
5 Pieces -Double End Boring Bar Set Without Holder And Included Bit
- • Black oxide finish. • Size boring bar -1/4″ x 5″, 3/8″ x 6″, 1/2″ x 6″, 5/8″ x 10″, x 3/4″ x 12″. • bars have one end 45º and other 90º. • Machined from selected steel for greater strength and rigidity. • Broached holes to accept standard high speed steel and carbide tool bits.
Yonntech 9 Pieces 1/2” Shank Boring Bar Set C-6 Carbide Tipped Lathe Tools
- These c-6 carbide tipped boring bars set include three different length boring bars each for minimum bores of 5/16″, 7/16″ and 9/16″ the bore depth ranges from 3/4″ to 3″. This is a good set of boring bar the bits are sharpened and ready to use out of the box good accessory for mini lathe. All shanks are held to 00000-00005″ from the nominal diameter and made of special heat treated alloy steel it works great well. The quality of the machined surface will be great good tool for you working with harder materials and softer metals. The 9 piece boring bar set be made of high quality c-6 carbide, for use in harder materials but also works great in aluminum and other soft metals carbide is brazed cleanly and quite large for long life.
4 Piece 1/4-1/2″ Double-END Boring BAR Set (1001-0007)
- 4 piece 1/4-1/2″ double-end boring bar set ~ includes the following one 1/4 x 5″ that takes a 5/32″ round tool bit, one 5/16 x 5″ that takes a 3/16″ round tool bit, one 3/8 x 6″ that takes a 3/16″ round tool bit and one 1/2 x 6″ that takes a 3/16″ square tool bit. ~ Black oxide finish. ~ Bars have one 45° end and one 90° end. ~ Machined from selected steel for greater strength and rigidity. ~ Broached holes accept high speed steel and carbide tool bits.
Borite B-500 9 Pc C6 1/2″ Shank Carbide Tipped Boring Bar Set
- Applications general purpose cutting tools designed to be used for machining a variety of different sized holes. Grade c2 for cast iron and non-ferrous materials. Used in a toolholder for lathe boring applications or they may be mounted in a boring head for boring in a milling machine and can also be used in other machines as well. Features basic design incorporates a tapered body diameter between the mounting shank and the cutting end, permitting bars to have considerable strength and rigidity while minimizing vibration, throughout a range of speeds and feeds. Includes (1) each of 2-1/4″,2-5/8″, 3. 0″, 3-3/4″, 4-1/2″. Bright and black oxide finishes. 0″, 2-5/8″, 3-3/16″,3-3/4″, 3. Used for a variety of different boring operations. For boring operations in both large or small starting holes. Technical data manufactured from high speed steel with carbide tips. Single ended carbide tipped tools. Grade c6 for steel and steel alloys.
Boring Head 2″(1-1/2-18) With R8 Shank(7/16-20 thread) and 9Pcs 1/2″ Boring Bar Sets
- 001 inch with high quality plastic box. 2 inch boring head， with r8 shank(end thread 7/16-20) 1/2 inch boring hole thread 1-1/2 inch-18 max offset 5/8 inch, graduation.
SER1212H16 Threading Lathe Turning Tool Holder Boring Bar Set, Include 10Pcs VP15TF 16ER AG60 Inserts+1Pcs SER1212H16 Lathe+1Pcs T15 Wrench
- ♬High strength, high toughness, stable and durablecutting fast, accuracy and stabilitysuitable for steel, stainless steelcome with storage box for easy to carry. ♬Featurescnc external threaded inserts 16er ag60 metric threadthreaded inserts reliable quality and stable performanceag60 (05-30) common metric thread. ♬Specificationsinserts material stainless steelinserts model vp15tf 16er ag60lathe modelser1212h16wrench model t15inserts shape triangleinserts color purple blackinserts sizeapprox16x4mmlathe size 9x15x11cminserts box size 82x33x1cm. ♬services and warranty threading lathe turning tool holder boring bar set transported by retail united states ware house, item shipped from united states, not china you will receive it within 7 working days, so do not worry about the transportation problem if you have any question, don’t hesitate to contact us we will provide the best service for you. ♬Note16er meaning blade diagonal distance 16mm dimensionsstorage box color random.
ees.Precision 1/2in Shank Boring Bar Set Carbide Tipped Bore Lathe Premium Tool / 9 Pcs.
- These going to use them to bore very small holes so the normal tool holder will clamp them down just fine. Material c-6 carbide,head size 2″. Carbide is brazed cleanly and quite large for long life. High hardness, high precision, and corrosion resistance. The shafts are quite rigid and have seen no chatter even on the longest (3″) bit on steel.
New 3/4″ Boring Bar Set 12 pcs C6 Carbide Tipped Bars 3/4 Shank Lathe Tool
- Shank diameter- 3/4″. Overall length 3-1/8″ to 6-1/2″ (see below). Minimum boring range 7/16″, 13/16″ (see below). Boring depth range 1-1/8″ to 4-1/2″ (see below). All shanks are held to 00000-00005″ from the nominal diameter and made of special heat treated alloy steel.
Boring Head 2″(7/8-20) with R8 Shank and 9Pcs 1/2″ Boring Bar Sets
- Max offset 5/8 inch, graduation 001 inch. Thread 7/8 inch-20. 1/2 inch boring hole. With high quality plastic box. 2 inch boring head， with r8 shank(end thread 7/16-20).
Boring Bar Set, 13 pcs Carbon Steel High Accuracy High Hardness Practical Delicate CNC Lathe Process F1 0.001” 7/16-20UNF Set Boring Machine Set
- High accuracy makes the boring head compatible with high accurate works. Carbon steel material has strong stability, is not easy to rust, and has a long service life. The model is universal suitable for nearly all kinds of lathe. Delicate and practical, high hardness, firm and strong. Complete set with auxiliary installation tools to help you with installation.
PB500 Super-Bore 1/2″ Shank Carbide Tipped Boring Bar Set
- High quality alloy steel for greater rigidity, precision ground shanks, offset taper to provide greater rigidity at cutting point. 9 piece set which contains 1 piece each of bars with minimum bores of 5/16 thru 9/16″, bore depths of 3/4 thru 3 & overall lengths of 2-1/4 thru 4-1/2″.
2″ Boring Head SET 12 Pcs Carbide Boring Bars MT2 -M10 F1-12 50mm Boring Head With 9pcs 12mm Boring Bars Milling Machine Accessories
- It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing. This tool set contains boring head,boring bars, perfect for the milling machine. The product is the main accessories of boring and cnc milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring. This tool set is made of high quality material, good wear resistance, and durable in use. Boring capacity 10~125mm.
BHS-2 Boring Head Set, 2″ Head plus R8 Shank and 1/2″ Carbide Tip Boring Bar Set
- 2″ boring head features 0001″ gradiuation, 5/8″ max offset, up to 1/2″ tool capacity, bar holder moves freely & smoothly, rigid design for precise hole size accuracy designed for excellent performance in many applications. R8 shank features 7/8″-20,made of high grade tool steel, hardened & ground, 7/16″-20 internal thread drawbar end 1/2″ carbide tipped boring bar 9 pc set with 1/2″ shanks. Kit includes 2″ boring head, r8 shank, & 9 piece c6 carbide tipped boring bar set. Our part # all-48106.
1/2″ Shank High Speed Steel Boring Bar Set with Holder for Mini Lathe
- 0005″ from the nominal diameter. The boring bar holder fits in the standard 4-way tool post on 7×10, 7×12, and 7×14 mini lathes. The heat treated, alloy steel shanks are held to 0. The bore depth ranges from 3/4″ to 3″. It holds boring bars with 1/2″ shanks. This carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16″, 7/16″, and 9/16″. 000 to -0. The stand may vary from that shown in the photo.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
