Knurled Head Thumb Screws – Solid Brass Machine Screws – #10-32 x 1/2″ QTY 25
- Hardness 40-75 rockwell b. Head diameter max 9/16″ head height 3/8″. Thread pitch 32 per inch. Body diameter (#10) max 01890, min 01818 (class 2a fit, ansi b11). Thread direction right hand.
Brass Machine Screw, Plain Finish, Round Head, Slotted Drive, 1/4″ Length, #6-32 Threads (Pack of 100)
- The slotted drive has a linear slot for use with a flat-blade driver. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. The material is nonmagnetic. The round head has a domed shape. Machine screws are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. The brass machine screw has a plain finish and a round head with a slotted drive. Brass provides corrosion resistance and offers thermal and electrical conductivity.
Lift The Dot Stud Nickel/Brass with a #8-32 5/8″ Brass Machine Screw , 10 Pc.
- 10 piece lift the dot stud nickel/brass with a brass #8-32 5/8″ inch long machine screw top quality dot brand fastener, durable and long lasting.
SOLID BRASS MACHINE SCREWS PAN HEAD SLOTTED M5 5MM X 25MM ( pack of 10 )
- Machine screw, slotted pan head, solid brass for increased durability. . Designed for use with nuts or pre tapped holes.
Solid Brass Machine Screw hex nuts 5/16-18 Qty 25
- There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. Tensile strength, a common measure to compare the strength of a fastener. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. Thread count18thickness / height7/32″width across flats9/16″ (0. It is the load needed to pull the fastener apart. 562″)drive style9/16″ socketmaterialsolid brasstensile strength50,000, 65,000 psiyield30,000-50,000 psihardness40, 75 rockwell b min. Package quantity25 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions.
ASME B18.6.3 Plain Brass Machine Screw Hex Nut, #4-40 Thread Size, 3/32″ Width Across Flats, 1/4″ Thick (Pack of 100)
- Ensure a lasting hold for any project. Brass is suitable where corrosion resistance is a primary consideration. Hex nuts are appropriate for use in low-strength assemblies. Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads. Drive system is a hexagon-shaped head.
330 Brass Machine Screw, Plain Finish, Round Head, Slotted Drive, 1/2″ Length, #2-56 Threads (Pack of 100)
- Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. The slotted drive has a linear slot for use with a flat-blade driver. The material is nonmagnetic. The 330 brass machine screw has a plain finish and a round head with a slotted drive. The round head has a domed shape. The 330 brass alloy provides corrosion resistance and offers thermal and electrical conductivity. Machine screws are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw.
Brass Machine Screw, Flat Head, Phillips Drive, #8-32, 2″ Length (Pack of 100)
- Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads. Flat head style allows fastener to sit flush to the surface. Phillips drive is designed to cam out under too much torque. Machine screws are often used with nuts or driven into tapped holes. Brass is suitable where corrosion resistance is a primary consideration.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #8-32 x 3/8″ QTY 25
- Thread pitch 32 per inch. Hardness 40-75 rockwell b. Head diameter max 15/32″ head height 1/4″. Body diameter (#8) max 01631, min 01571 (class 2a fit, ansi b11). Thread direction right hand.
Brass Machine Screw Hex Nut, Plain Finish, ASME B18.6.3, #3-48 Thread Size, 1/16″ Width Across Flats, 3/16″ Thick (Pack of 100)
- Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. Some nuts have a self-locking mechanism, such as a nylon patch or distorted threads, that makes them suitable for applications with a high amount of vibration. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. 6. 3 specifications. The material is nonmagnetic. Brass provides corrosion resistance and offers thermal and electrical conductivity. Designed for use with machine screws, the nut has a flat top with a large bearing surface and chamfered corners. It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. Several different nut styles fit a variety of application and installation requirements. The brass machine screw hex nut has a plain finish and meets american society of mechanical engineers asme b18.
Brass Machine Screw, Plain Finish, Flat Head, Phillips Drive, 1″ Length, #4-40 Threads (Pack of 100)
- Plain surface has no finish or coating. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Brass provides corrosion resistance and offers thermal and electrical conductivity.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #10-32 x 5/8″ QTY 25
- Head diameter max 9/16″ head height 3/8″. Thread direction right hand. Thread pitch 32 per inch. Body diameter (#10) max 01890, min 01818 (class 2a fit, ansi b11). Hardness 40-75 rockwell b.
8/32 X 3/4″ Brass Round Head Slotted Machine Screws (Pack of 12)
- Hardness 40-75 rockwell b. Head diameter max 9/16″ head height 3/8″. Thread direction right hand. 8/32 x 3/4″ brass round head slotted machine screws (pack of 12). Thread pitch 24 per inch.
10/32 X 1-1/2″ Brass Flat Head Phillips Machine Screws (Pack of 12)
- Drive system is a hexagon-shaped head. Ensure a lasting hold for any project. 10/32 x 1-1/2″ brass flat head phillips machine screws (pack of 12). Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads. Hex nuts are appropriate for use in low-strength assemblies.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #10-24 x 3/4″ QTY 25
- Head diameter max 9/16″ head height 3/8″. Body diameter (#10) max 01890, min 01818 (class 2a fit, ansi b11). Thread direction right hand. Hardness 40-75 rockwell b. Thread pitch 24 per inch.
Brass Machine Screw, Plain Finish, Round Head, Slotted Drive, 3/16″ Length, #00-90 UNM Threads, Made in US (Pack of 100)
- The slotted drive has a linear slot for use with a flat-blade driver. Brass provides corrosion resistance and offers thermal and electrical conductivity. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. The brass machine screw has a plain finish and a round head with a slotted drive, and is made in usa. The material is nonmagnetic. Machine screws are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. The round head has a domed shape.
6/32 X 1-1/2″ Brass Round Head Slotted Machine Screws (Box of 100)
- Enjoy the handy machine screws assortment, a variety of many useful sizes to meet your needs for different projects. 6/32 x 1-1/2″ brass round head slotted machine screws (box of 100). Kit includes 18pc, 1/4″-20 nuts, 45pc, 10-24 nuts, 8pc, 1/4-20 x 1″ round bolts, 16pc, 10-24 x 1/2″ round bolts, 10pc, 1/4″-20 x 1/2″ round bolts, 5pc, 10-24 x 1-1/4″ round bolts, 16pc 10-24 x 3/4″ round bolts, 8pc, 10024 x 1″ round bolts. Great kit for home, garage, and work, comes in a handy container fits neatly in kitchen and office drawers, hardware and craft cabinet. Machine screws are used for fastening materials together by going into a tapped hole or through a hole and being held by a nut,.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
