17 Top Dado Blades

 

Concord Blades DADO600HP DADO 6-Inch 24 Teeth Set

Concord Blades DADO600HP DADO 6-Inch 24 Teeth Set

Concord Blades DADO600HP DADO 6-Inch 24 Teeth Set - 17degree hook with a dm5/8″ arbor and 20 teeth. Atb+ftg grind alternate & flat top grind. Cut rabbets, splines, lap joints, dadoes and other jobs in all wood and wood products. (4) 1/8” twin tooth choppers, (1) 1/16” twin tooth chopper & (5)shims heavy-duty wood storage box cuts smooth dados (grooves) from 3/16″ to 13/16″. Heavy-duty wood storage box cuts smooth dados (grooves) from 3/16″ to 13/16″.

 

CRAFTSMAN 12pc 6 CARBIDE STACKING DADO BLADE SET 8910 RADIAL ARM TABLE SAW

CRAFTSMAN 12pc 6″ CARBIDE STACKING DADO BLADE SET 8,9,10″ RADIAL ARM TABLE SAW

CRAFTSMAN 12pc 6″ CARBIDE STACKING DADO BLADE SET 8,9,10″ RADIAL ARM TABLE SAW - Craftsman 12pc 6″ carbide stacking dado blade set 8,9,10″ radial arm table saw#0031/13. Revolutionary sawstop protection. Compatible with all standard 8 inch dado sets up to 13/16 inch thick. Designed for quick replacement when activated. Compatible with all woods and other non-conductive materials.

 

Amana Tool 651210 Carbide Tipped LH Outside Dado Blade 12 Inch D x 24T 1 Inch Bore

Amana Tool 651210 Carbide Tipped L/H Outside Dado Blade 12 Inch D x 24T 1 Inch Bore

Amana Tool 651210 Carbide Tipped L/H Outside Dado Blade 12 Inch D x 24T 1 Inch Bore - Although each outside saw is sold seperateley, it is recommended to buy one set of both blades so the o. D. Specify left or right hand. Matches.

 

Freud SD508C332 8 Diameter X 332 Thick X 4T Chipper Carbide-Tipped Saw Blade With 58 Arbor For Freud Sd508 Dado Set

Freud SD508C332 8″ Diameter X 3/32″ Thick X 4T Chipper Carbide-Tipped Saw Blade With 5/8″ Arbor For Freud Sd508 Dado Set

Freud SD508C332 8″ Diameter X 3/32″ Thick X 4T Chipper Carbide-Tipped Saw Blade With 5/8″ Arbor For Freud Sd508 Dado Set - 24-inch by 30-inch base made from 1-inch thick melamine coated mdf. A stop block is included with the fence. Adjustable fence adjusts to angles up to 45-degrees. The 1-inch wide center slot accommodates a wide variety of router bits. Adjustable position miter bar to fit almost any router table with a standard miter slot.

 

CRAFTSMAN 12pc 6 CARBIDE STACKING DADO BLADE SET 8910 RADIAL ARM TABLE SAW

CRAFTSMAN 12pc 6″ CARBIDE STACKING DADO BLADE SET 8,9,10″ RADIAL ARM TABLE SAW

CRAFTSMAN 12pc 6″ CARBIDE STACKING DADO BLADE SET 8,9,10″ RADIAL ARM TABLE SAW - Brand new craftsman 12pc 6″ stacking dado blade set 5/8″ arbor hole carbide tips 7000 max rpm cuts grooves from 1/4″, 13/16″ fits 8″, 9″ and 10″ radial arm or table saws contents 2pcs 6″ blades 4pcs 1/8″ chipper 1pc 1/16″ chipper 5pcs metal shims stacking dados cut a smooth and precise groove either across or with the grain in all types of woods, plywood and composite wood materials this set contains 2 outside cutting blades that have a tooth pattern of two beveled cutting teeth for a clean crisp cut followed by a straight raker tooth the five chipper blades combine with the two outer side-cutting blades to cut grooves from 1/4″ to 13/16″.

 

Amana Tool 658020 Carbide Tipped LH Outside Dado Blade 8 Inch D x 46T 58 Bore

Amana Tool 658020 Carbide Tipped L/H Outside Dado Blade 8 Inch D x 46T 5/8 Bore

Amana Tool 658020 Carbide Tipped L/H Outside Dado Blade 8 Inch D x 46T 5/8 Bore - Specify left or right hand. Matches. D. Although each outside saw is sold seperateley, it is recommended to buy one set of both blades so the o.

 

GilaTools 6-Inch Stacked Dado Carbide Saw Blades Set

GilaTools 6-Inch Stacked Dado Carbide Saw Blades Set

GilaTools 6-Inch Stacked Dado Carbide Saw Blades Set - Outside edge blade 24 teeth atb carbide tip. Chopper blade twin tooth ftg carbide tip. Constructed from industrial grade hardened steel with scientific laser welded segments to prevent warping and overheating. Cutting width 1/8 in to 13/16 in. Arbor 5/8 in heat treated steel core that provides extreme blade strength for deep cutting with minimal vibration.

 

Delta 36-514 6-Inch Carbide Tipped Adjustable Dado Blade

Delta 36-514 6-Inch Carbide Tipped Adjustable Dado Blade

Delta 36-514 6-Inch Carbide Tipped Adjustable Dado Blade - Get perfect flat-bottom cuts, grooves and dadoes from 1/8″ to 3/4″. C2 tungsten micro-grain carbide tips last longer than steel. Maximum speed 4500 rpm. Use for hard or soft woods, plywood, particle boards and laminates. Arbor 5/8″.

 

8 inch C2 Tungsten Carbide Tipped 22 Tooth Dado Blade Set with Saws and Chippers

8 inch C2 Tungsten Carbide Tipped 22 Tooth Dado Blade Set with Saws and Chippers

8 inch C2 Tungsten Carbide Tipped 22 Tooth Dado Blade Set with Saws and Chippers - 55 lb. The industrial-quality c2 carbide tips last longer than steel and can easily be resharpened. Weight 4. These outstanding dado blades allow you to make clean flat bottom cuts in wood, plywood, particle board and laminates from 1/8″ to 3/4″ wide two outside blades cut the walls and the chippers smooth out the bottom. Arbor size 5/8 in. ) 8 in. Blade width (in. Material tungsten carbide maximum speed (rpm) 4500 number of pieces included 1 number of teeth 22 thickness 1/16 in.

 

Forrest DK12244 Dado King 12-Inch 2932-Inch Width 1-Inch Bore Dado Blade Set

Forrest DK12244 Dado King 12-Inch 29/32-Inch Width 1-Inch Bore Dado Blade Set

Forrest DK12244 Dado King 12-Inch 29/32-Inch Width 1-Inch Bore Dado Blade Set - Double hard and 40% stronger c-4 carbide will give up to 300% longer life between sharpenings. 20° face hook for easy feed. Ends cutting 1/16″ oversize to allow for resurfacing. Buy and sharpen one blade instead of 3, (24t rip, 50t combination, 80t crosscut). Ends second-step finishing (jointing and sanding not required).

 

Amana Tool 658010 Carbide Tipped LH Outside Dado Blade 8 Inch D x 24T 58 Bore

Amana Tool 658010 Carbide Tipped L/H Outside Dado Blade 8 Inch D x 24T 5/8 Bore

Amana Tool 658010 Carbide Tipped L/H Outside Dado Blade 8 Inch D x 24T 5/8 Bore - Although each outside saw is sold seperateley, it is recommended to buy one set of both blades so the o. Specify left or right hand. Matches. D.

 

Tenryu GMD-20340 8 Dado Blade With Two 40 Tooth Main Blades And Four 2 Tooth Chippers

Tenryu GMD-20340 8″ Dado Blade With Two 40 Tooth Main Blades And Four 2 Tooth Chippers

Tenryu GMD-20340 8″ Dado Blade With Two 40 Tooth Main Blades And Four 2 Tooth Chippers - This set produces super-clean dado edges with an astoundingly flat bottom surface in wood materials and even in melamine. The tenyru gmd-20340 is included with gmd-20340l, gmd-20340r left outside cutter, gmd-8c right outside cutter, (2) gmd-4c 1/8″ chipper, (1) gmd-16c 1/4″ chipper.

 

Forrest DK06244 Dado King 6-Inch 2932-Inch Width 58-Inch Bore Dado Blade Set

Forrest DK06244 Dado King 6-Inch 29/32-Inch Width 5/8-Inch Bore Dado Blade Set

Forrest DK06244 Dado King 6-Inch 29/32-Inch Width 5/8-Inch Bore Dado Blade Set - With new 30° atb tooth style this blade stops totally, all bottom and top splintering on ply veneers on both radial and table saw machines. Eliminates bottom splintering on radial crosscuts. Saves 1/3 wood loss on each cut. Feeds easily when used for moderate rips and crosscuts on a table saw. Reduces “jump in” for better “pull-control”.

 

MLCS SUPER STACK Dado Blade Set 8 x 42 Tooth w

MLCS SUPER STACK Dado Blade Set 8″ x 42 Tooth w/

MLCS SUPER STACK Dado Blade Set 8″ x 42 Tooth w/ - Cut range 1/8″, 29/32″. Eight brass shims two 0. Includes two 42-tooth saw blades with 1/8″ kerf, six 6-tooth solid body chippers four 1/8″, one 1/16″ and one 3/32″. 015″ and two 0. 005″, two 0. 020″. Makes both rip and crosscuts and will produce a flat bottom dado. 010″, two 0. 5/8″ arbor. Our new 8″ x 42t super stack carbide tipped dado blade set has c-4 carbide tips for a super smooth cut.

 

Vulcan 416371or Dado Saw Blade Set 8

Vulcan 416371or Dado Saw Blade Set, 8″

Vulcan 416371or Dado Saw Blade Set, 8″ - For table and radial arm saws. . Includes (1) 1/16″ twin tooth chipper, (2)outside edge circular saw blades, (4) 1/8″ twin tooth chipper and (5) metal shims. Makes cuts from 1/4″ to13/16″ thick.

 

Amana Tool 651010 Carbide Tipped LH Outside Dado Blade 10 Inch D x 24T 58 Bore

Amana Tool 651010 Carbide Tipped L/H Outside Dado Blade 10 Inch D x 24T 5/8 Bore

Amana Tool 651010 Carbide Tipped L/H Outside Dado Blade 10 Inch D x 24T 5/8 Bore - D. Matches. Although each outside saw is sold seperateley, it is recommended to buy one set of both blades so the o. Specify left or right hand.

 

Forrest DK08244 Dado King 8-inch 2932-inch Width 58-inch Bore Dado Blade Set

Forrest DK08244 Dado King 8-inch 29/32-inch Width 5/8-inch Bore Dado Blade Set

Forrest DK08244 Dado King 8-inch 29/32-inch Width 5/8-inch Bore Dado Blade Set - With new 300-degree atb tooth style this blade stops totally–all bottom and top splintering on ply veneers on both radial and table saw machines. Eliminates bottom splintering on radial crosscuts. Each blade is hand straightened to run out of 001- or 002-inch for maximum cut quality. A heavier than normal steel plate maintains maximum stability for the best cut. A negative face hook also adds to optimum rigidity when cutting.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.