18 Best Evolution Power Tools

 

Evolution Power Tools Long Series Broaching Cutter 64 x 50 mm #ad

Evolution Power Tools Long Series Broaching Cutter, 64 x 50 mm

Evolution Power Tools Long Series Broaching Cutter, 64 x 50 mm #ad - Evolution range of broaching cutter offer better economy, quality and performance. Manufactured from fully ground m2 steel. High quality, precision tool. Broaching cutters last longer, allowing more holes cut compared to standard annular cutting bits. Measures 64mm diameter by 50mm length.

 

Evolution Power Tools RAGE5S 10 TCT Multi-Material Table Saw 10 Orange #ad

Evolution Power Tools RAGE5S 10″ TCT Multi-Material Table Saw, 10″, Orange

Evolution Power Tools RAGE5S 10″ TCT Multi-Material Table Saw, 10″, Orange #ad - 3 year limited. Powerful hi-torque motor with optimized gearbox & blade system. 0°, 45° bevel tilt and 60˚, 60˚ miter fence covers all common, compound cutting angles. Collapsible frame with wheels for easy storage and portability. Designed to cut a wide range of materials without changing blades.

 

Evolution Power Tools RAGE355Blade Multi-Purpose Cutting Blade for RAGE2 14-Inch #ad

Evolution Power Tools RAGE355Blade Multi-Purpose Cutting Blade for RAGE2, 14-Inch

Evolution Power Tools RAGE355Blade Multi-Purpose Cutting Blade for RAGE2, 14-Inch #ad - Replacement blade. Use with rage2 14″ multipurpose chop saw and evosaw380 15″ steel cutting chop saw. Cuts through steel, aluminum, wood and plastic. No coolant required. Produce virtually no heat, burrs, or sparks. Cuts wood, steel, aluminum and plastic.

 

Evolution Power Tools EVOMCS-7 Mini Cutters Set of 7 For Use With Hand Drills #ad

Evolution Power Tools EVOMCS-7 Mini Cutters Set of 7 For Use With Hand Drills

Evolution Power Tools EVOMCS-7 Mini Cutters Set of 7 For Use With Hand Drills #ad - These cutters are ideal for sheet metal, mild steel, aluminum, plastic, hvac, light piping, conduit, copper, brass, and stainless steel. Each set contains 7 mini cutter bits, a 3/8-inch chuck arbor with pilot, center punch, small and large washers, and an arbor hex wrench. Offering enhanced speed, quality and durability, the evolution mini cutters will out perform any twist drill bit or hole saw. Diameters included are 5/16-inch, 3/8-inch, 7/16-inch, 1/2-inch, 9/16-inch, 5/8-inch, 3/4-inch. The evolution mini cutters set expands on the premium quality of evolution cyclone annular cutters with a specialty design that delivers maximum performance for use on hand drills. When drilling, each hole is cut cleanly and accurately in a fraction of the time.

 

Evolution Power Tools 12BLADEDM 12-Inch Diamond Blade #ad

Evolution Power Tools 12BLADEDM 12-Inch Diamond Blade

Evolution Power Tools 12BLADEDM 12-Inch Diamond Blade #ad - 2mm (. 12″ diamond masonry blade evolution 12″ segmented diamond blade, 25. Max rpm 5000. 4mm (1″) bore / 3. 118″) kerf.

 

Evolution Power Tools EVOMAG28 1-18 Magnetic Drill #ad

Evolution Power Tools EVOMAG28 1-1/8″ Magnetic Drill

Evolution Power Tools EVOMAG28 1-1/8″ Magnetic Drill #ad - 7/16″- 1-1/8″ cutting diameter. Heavy-duty magnetic holding power. High quality construction. Integrated coolant system. 6 inch stroke length. Left or right handles. 2″ depth of cut. Right or left spoke handles.

 

Evolution Power Tools 14BLADEST Steel Cutting Saw Blade 14-Inch x 66-Tooth #ad

Evolution Power Tools 14BLADEST Steel Cutting Saw Blade, 14-Inch x 66-Tooth

Evolution Power Tools 14BLADEST Steel Cutting Saw Blade, 14-Inch x 66-Tooth #ad - 1600 rpm. Designed to increase performance-note designed for use with evolution saws or other low rpm saws. Evolution saw blades are designed to deliver maximum performance by using the highest grade carbide, hardened blade bodies, and ultra high-grade brazing techniques. All offer premium quality. 1-inch arbor size. 66 carbide teeth, 094-inch kerf.

 

Evolution Power Tools R355CPS #ad

Evolution Power Tools R355CPS

Evolution Power Tools R355CPS #ad - [3-year warranty], this multi-material cutting saw is extremely versatile and backed by a 3-year warranty and friendly us-based customer service team. [Powerful], high-torque 15 amp motor will easily cut through a variety of materials and has a minimum 160 hr motor life. [large cut capacity], huge square cut capacity of 4-¾” x 4-¾” and rectangle cut capacity of 7-⅛” x 3-¾” at 90˚. [Carbide tipped blade], 14″ 32t tungsten carbide tipped blade for accurate, smooth cuts through a variety of materials it will even cut mild steel with virtually no heat, burrs or. [Multi-material cutting], this saw will cut wood, wood with embedded nails, composite decking, mild steel, plastic & more with one blade.

 

Evolution Power Tools Diamond Blade 255 mm #ad

Evolution Power Tools Diamond Blade, 255 mm

Evolution Power Tools Diamond Blade, 255 mm #ad - It allows the machine to cut stone, concrete, roof tiles and slate. The continuous rim diamond blade ideally enhances evolution multipurpose saw’s versatility. A durable blade which features a high concentration of diamond for longevity and a hot-pressed turbo continuous rim for a smooth cutting performance.

 

Evolution Power Tools Chuck and Key 05 Inch #ad

Evolution Power Tools Chuck and Key, 0.5 Inch

Evolution Power Tools Chuck and Key, 0.5 Inch #ad - Fits competitor’s quick change arbors to enables high performance cyclone premium grade cutter to be used. Made in britain. 1/2-inch chunk and key. Chunk and key enables twist drills to be used with evolution magnetic drill.

 

Evolution Power Tools CIRC Saw Blade CARB 7-14 #ad

Evolution Power Tools CIRC Saw Blade CARB 7-1/4

Evolution Power Tools CIRC Saw Blade CARB 7-1/4 #ad - Cuts wood without heat, burrs, or coolant. Virtually no sparks. These saw blades are rated for cutting wood materials like boards or mdf the cutting blades are not limited to the these materials, but perform at their peak when cutting them specifically. Creates an instantly workable finish.

 

Evolution Power Tools R185SMS 7-14 Multi-Material Compound Sliding Miter Saw Plus #ad

Evolution Power Tools R185SMS+ 7-1/4″ Multi-Material Compound Sliding Miter Saw Plus

Evolution Power Tools R185SMS+ 7-1/4″ Multi-Material Compound Sliding Miter Saw Plus #ad - 8- 1/4in x 2- 1/2in max cross cut capacity with a 0°, 45° bevel tilt and a 50˚, 50˚ miter that covers all common cutting angles accurately. Powerful 10 amp hi-torque motor with optimized gearbox & blade system. Includes laser guidance, 10 ft power cord, 3 piece clamp, integrated carry handles, and dust bag. Without changing blades, this saw is designed to cut a wide range of materials. Manufacturers 3 year limited warranty.

 

Evolution Power Tools Diamond Blade 355 mm #ad

Evolution Power Tools Diamond Blade, 355 mm

Evolution Power Tools Diamond Blade, 355 mm #ad - It allows the machine to cut stone, concrete, paving slabs and marble. The segmented diamond blade greatly enhances evolution multipurpose saw’s versatility. A durable blade which features a high concentration of diamond for longevity and a hot-pressed turbo segmented rim for consistent cutting ability.

 

Evolution Power Tools R185SMS 7-14 Multi-Material Compound Sliding Miter Saw #ad

Evolution Power Tools R185SMS 7-1/4″ Multi-Material Compound Sliding Miter Saw

Evolution Power Tools R185SMS 7-1/4″ Multi-Material Compound Sliding Miter Saw #ad - [portable], the smallest sliding miter saw in the family, the r185sms is easily portable and ideal for use in confined spaces without compromising on power & versatility. [3-year ], this multi-material cutting saw is extremely versatile and backed by a 3-year and our friendly us-based customer service team. [Carbide tipped blade], 7-¼” 16t tungsten carbide tipped blade for accurate, smooth cuts through a variety of materials it will even cut mild steel with virtually no heat, burrs or sparks. [Multi-material cutting], this saw will cut wood, wood with embedded nails, composite decking, mild steel, plastic & more with one blade. [Versatile cutting], 0 ̊, 45 ̊ bevel tilt and 50 ̊, 50 ̊ miter covers all common cutting angles accurately and easily 8-¼” slide for high cutting capacity.

 

Evolution Power Tools R255SMSDB 10 Multi-Material Double Bevel Sliding Compound Miter Saw #ad

Evolution Power Tools R255SMSDB 10″ Multi-Material Double Bevel Sliding Compound Miter Saw

Evolution Power Tools R255SMSDB 10″ Multi-Material Double Bevel Sliding Compound Miter Saw #ad - 3-year limited. Clean, consistent and smooth cutting with left and right 0°, 45° bevel tilt and 50-50 miter angles. Compatible with evolutions miter saw stand (evoms1). Designed to cut a wide range of materials without changing blades. Accurate cuts with sliding functionality, adjustable cut depth, and laser precision guidance.

 

Evolution Power Tools R210SMS Mitre Saw Accessory Pack 210 mm #ad

Evolution Power Tools R210SMS Mitre Saw Accessory Pack, 210 mm

Evolution Power Tools R210SMS Mitre Saw Accessory Pack, 210 mm #ad - Includes a front clamp for additional accuracy and a quick release top clamp for faster adjustments. This is the evolution accessory pack for the evolution r210sms multi-material sliding mitre saw. A dust bag for a cleaner working environment is included as well as a dust port adapter (36 mm) for attaching a vacuum hose.

 

Evolution Power Tools Long Series Broaching Cutter 61 x 50 mm #ad

Evolution Power Tools Long Series Broaching Cutter, 61 x 50 mm

Evolution Power Tools Long Series Broaching Cutter, 61 x 50 mm #ad - Broaching cutters last longer, allowing more holes cut compared to standard annular cutting bits. Measures 61mm diameter by 50mm length. High quality, precision tool. Manufactured from fully ground m2 steel. Evolution range of broaching cutter offer better economy, quality and performance.

 

Evolution Power Tools RAGE4 7-14-Inch TCT Multipurpose Cutting Chop Saw #ad

Evolution Power Tools RAGE4 7-1/4-Inch TCT Multipurpose Cutting Chop Saw

Evolution Power Tools RAGE4 7-1/4-Inch TCT Multipurpose Cutting Chop Saw #ad - This award winning machine is the perfect tool for slicing through rebar, bolt trimming and other small awkward applications. Evolution rage 4, 7-1/4-inch, tct, multipurpose chop saw is capable of cutting steel, aluminum, wood with nails in and plastic. Plus it has the ability to cut through 2 by 4 planed lumber and reclaimed lumber with nails and screws. This saw is an essential tool to any tradesman.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.