SUPERTOOLS M5 M6 M8 M10 M12 METRIC Damaged Thread Repair Tool Kit TP1040
- Tang removal, after finishing lift the installation tool and use the tang break tool to remove the tang. Ideal for restoring damaged threads in steel, cast, iron and aluminum. 8 x 6. 0 x 8. 3mm. (To repair a spark plug thread no pre-drilling is necessary if using the special spark plug tap), please pay attention that for fluteless taps bigger holes are required. 0mm m8 x 1. Check, check that the thread and pitch of the tap and the bolt match tapping, use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil) install the insert, place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Suitable for engine repair and other automotive applications. Manufactured from chrome vanadium steel for strength and durability. 75 x 16. Drilling, clear the damaged threads with a standard drill. 5 x 13. 5mm m12 x 1. 8mm m10 x 1. Don’t work against the thread direction as the tang could break. 7mm m6 x 1. 25 x 10. Due to the narrow and exact tolerances the new thread normally is stronger than the original ones. Wind the insert in with a light downward pressure until a half turn below the surface. For bigger sizes and spark plug taps use long nose pliers to remove the tang. Set includes the following 5 x installation tools 5 x break pin tools 5 x twist drills 1 x hex key 5 x taps 110pc wire thread inserts m5 x 0.
SUPERTOOLS Oil Drain Sump Plug Key Gearbox Axel Socket Wrench Removal Tool Set TP1162
- Used for removal replacement of oil drain plugs,gearboxes and axels. Square key sizes 8mm(5/16″), 8/3″, 11mm, 13mm. Professional tool for commercial or occasional use. Manufactured from chrome vanadium steel for strength and durability. Includes blow-moulded case for storage and transportation. Hex key sizes 8mm, 9mm, 10mm, 12mm, 14mm, 17mm, 8/3″, 170mm 3/8″ sliding t-bar. Include 1pcs t-bar with 3/8″drive 1pc drain plug socket-hex3/8″ 1pc drain plug socket-hex8mm 1pc drain plug socket-hex9mm 1pc drain plug socket-hex10mm 1pc drain plug socket-hex12mm 1pc drain plug socket-hex14mm 1pc drain plug socket-hex17mm 1pc drain plug socket8mm 1pc drain plug socket3/8″mm 1pc drain plug socket11mm 1pc drain plug socket13mm.
Supertool SCC0.5 Screw Cam Clamp
- This clamp is equipped with a screw cam (spherical universal designed), which provides an extra powerful clamping force on the work piece at no load and even when vibrations occur during operation. High-frequency quenching of special alloy steels gives greater durability to the cam. The main body is made from the die-forging of special alloy steels in one piece, which is optimally tempered for maximum strength and durability. The cam and the pad can be easily replaced. Universal clamp for lifting of a large variety of different shaped steel, ranging from steel plates and structured steel to curved and spherical shaped steels.
SUPERTOOLS 25PCS Screw Extractor Drill & Guide Removal Broken Bolts Fastners Easy Out Set TP1237
- 175mm) g4, dia 3/8″ (9. 29mm) drill 1/4″ (6. 76mm) g7, dia 15/32″ (11. 76mm) n3, 1/4″ (6. 14mm) drill 1/8″ (3. 175mm) g3, dia 11/32″ (8. 73mm) 5pcs extractor pins #1, #2, #3, #4, #5 10pcs drilling guide g1, dia 9/32″ (7. 35mm), 5/16″ (7. 175mm) g5, dia 13/32″ (10. 35mm) g10, dia 9/16″ (14. 175mm) n2, 3/16″ (4. 70mm) drill 3/16″ (4. 175mm), 3/16″ (4. 76mm) g9, dia 17/32″ (13. 76mm) g8, dia 1/2″ (12. 35mm) n4, 5/16″ (7. 94mm) n5, 11/32″ (8. 35mm) 5pcs extractor nut n1, 1/8″ (3. 76mm), 1/4″ (6. 32mm) drill 3/16″ (4. 92), 11/32″ (8. 49mm) drill 1/4″ (6. 11mm) drill 3/16″ (4. 175mm) g2, dia 5/16″ (7. 94mm) drill 1/8″ (3. 73mm). 91mm) drill 3/16″ (4. Extracts screw and bolts, can be used on thread sizes from 5 to 16mm removes breaking fastener without breaking or jamming turns broken fasteners out and allows higher torque without expansion include 5pcs hss drill bits 1/8″ (3. 73mm) drill 1/8″ (3. 53mm) drill 1/8″ (3. 76mm) g6, dia 7/16″ (11.
AB3N by Supertool
- Includes 2 pliers, wire cutters, 2 knives, saw, scissors, 2 files, 2 drivers, bottle opener and more. Includes leather combination sheath. Factory gear shop only dealing with high-quality tools from all over the world. Supertool nk-m10 10 mm threaded rod cutter. Includes leatherman 931014 42-bit assortment for leatherman bit drivers.
SUPERTOOLS 100MM Mini Trim Clip Removal Pliers TP1200
- Length 100mm. Glass reinforced nylon trim clip removal pliers with spring-loaded handles. Small size makes them ideal where access is limited.
SUPERTOOLS Universal Camshaft Pulley & Fan Clutch Removal Holder Set Clutch Alignment Tool TP1229
- Long handle enables technician to easily hold the pulley when tightening or loosening retaining bolts. Adjustable jaw spread. Four different size step pins are interchangeable. Wrench is adjustable from 1-1/2″ to 8-5/8″. Designed to remove and install fan clutch and rotate or restrain the camshaft pulley.
SUPERTOOLS 1/2″ Drive Axle Nut Impact Socket Tool Kit TP1209
- Sizes 29mm 30mm 31mm 32mm 33mm 34mm 35mm 36mm 38mm. Heavy duty chrome moly alloy steel construction. For removal or installation of axle nuts. 1/2″ drive 6 point design. Complete with storage case.
TC105NF by Supertool
- To be used with any banding up to 10mm in width. Comfortable double dipped handles. Tc105nf. Crimps and flattens clamps on ear type cv joint boot clamps. Standard banding tool for cv joint boots.
Supertool Screw adjusted Cam Clamp SAC/ SCC1.5 (1.5 TON)
- This clamp is equipped with a screw cam (spherical universal designed), which provides an extra powerful clamping force on the work piece at no load and even when vibrations occur during operation. The cam and the pad can be easily replaced. Universal clamp for lifting of a large variety of different shaped steel, ranging from steel plates and structured steel to curved and spherical shaped steels. This omni, directional clamp can lift, hang, turn over, and pull steel structures. The main body is made from the die-forging of special alloy steels in one piece, which is optimally tempered for maximum strength and durability.
SUPERTOOLS 110-170mm 2 Leg Fuel Sender Tank 24mm Hex Spanner Wrench Tool TP0118
- Drive 24mm hex legs 2 capacity 110-170mm. For removing and refitting fuel tank sender mounting rings.
SUPERTOOLS Universal Hose Clip Pliers Clic And Clic R Type Collars TP1173
- Plastic covered handles for comfort and grip when using this application. Special jaw allows the change from fit to remove simply by turning the pliers over. Suitable for releasing and refitting re-useable clic and clic r hose clips. Heavy duty spring loaded pliers for fitting and removing clic and clic r hose clips. Single rivet design so nothing can really go wrong with them.
SUPERTOOLS MERCEDES BENZ BMW Fan Clutch Holder Wrench Service Tool Kit TP1204
- 5) thin wrench 65mm with an 8mm overall thickness and an overall length of 16 inches for proper leverage mercedes ref 120-589-0201-00 applicable mercedes m103 (6 cyl , m104 (6 cyl 4 vlv),m119 (8 cyl 4 vlv) m120 (12 cyl 4 vlv). 3+4) wrench / holding bar this is similar to benz number 900-589-0307-00 comes complete with 8 and 10mm allen bits the 8mm is needed for r&r of fan clutch fastener applicable mercedes m103, 104, 111, 119, 120 om 602, 603, 605, 606 the 10mm is used for adjusting a/c belt tension and r&r of idler pulley models 420, 560 with v-819 86 and newer. 1) hub securing bar 113-0040 used for securing water pump hub from rotating during r&r of fan clutch nut this holder bolts onto the hub, as the poly v-belt is not in place and cannot be used to lock the hub applicable mercedes m112 & m113. 6+7) bmw double water pump tool this special tool covers most popular applications used for securing water pump hub from rotating during r & r of fan clutch nut applicable bmw m10, m20, m30, m40, m41, m42, m50, m60, m62. 2) locking hook needed for securing the visco fan coupling during r&r of 8mm hex fastener w/o removing the radiator mercedes m103.
SUPERTOOL HW-105
- Factory gear shop only dealing with high-quality tools from all over the world. Comes with leatherman 25 year warranty. Includes leatherman 931014 42-bit assortment for leatherman bit drivers. Includes leather combination sheath. Includes 2 pliers, wire cutters, 2 knives, saw, scissors, 2 files, 2 drivers, bottle opener and more.
SUPERTOOLS CV Joint Boot Clamp Pliers Set 2PCS TP1231
- Cv boot & hose clamp pliers ear type. Comfortable double dipped handles. To be used with any banding up to 10mm in width. Standard banding tool for cv joint boots. Crimps and flattens clamps on ear type cv joint boot clamps.
SUPERTOOLS 1/2 Inch Torque Wrench Angle Gauge TP1136
- 360 degree scale is marked at 2 degree increments & intervals of 10 degree and 30 degree. Measures angle of rotation after pre-torque in torque-angle application. Easily zeroed for next application by turning the tool housing. 1/2″ male & female square drive and an adjustable holding rod hold the gauge in position during use.
Leatherman SUPERTOOL 300 sheath
- We also offer a tactical line for the same product in our other listing. This holder is 100% made in the usa this light weight tactical model is for the supertool 300 multi-tool with a heavy duty spring steel belt clip. These holders were designed for law enforcement and military applications that require easy 1 finger removal and securely holds the tool in place during heavy activity.
SUPERTOOLS 235MM Car Trim Removal Pliers Tool TP1078
- Quickly removes plastic fasteners from door panels of most cars, trucks & suv’s. Helps provide better support under the clip to remove panel clips without damaging panel clips unique two-step tip provides support for panel clip removal. Carbon steel, heat treated & blackened body, plastic coated grip. Easy access into confined areas. Spring loaded mechanism for greater leverage.
CO-64 Utility Knife or Supertool Holster
- This omni, directional clamp can lift, hang, turn over, and pull steel structures. The main body is made from the die-forging of special alloy steels in one piece, which is optimally tempered for maximum strength and durability. The cam and the pad can be easily replaced. This clamp is equipped with a screw cam (spherical universal designed), which provides an extra powerful clamping force on the work piece at no load and even when vibrations occur during operation. Universal clamp for lifting of a large variety of different shaped steel, ranging from steel plates and structured steel to curved and spherical shaped steels.
SUPERTOOLS 75-160mm 3 Leg Fuel Sender Tank 24mm Hex Spanner Wrench Tool TP1119
- For removing and refitting fuel tank sender mounting rings. Drive 24mm hex legs 3 capacity 75-160mm.
Supertool NK-M10 10 mm Threaded Rod Cutter by SUPER TOOL
- Factory gear shop only dealing with high-quality tools from all over the world. Includes leather combination sheath. Supertool nk-m10 10 mm threaded rod cutter. Includes leatherman 931014 42-bit assortment for leatherman bit drivers. Includes 2 pliers, wire cutters, 2 knives, saw, scissors, 2 files, 2 drivers, bottle opener and more.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
