IVY Classic 42220 Flex-Abrasive 7-Inch x 7/8-Inch 80 Grit Medium Zirconia Flap Disc – Type 29, 1-Piece
- Disc diameter 7-inch, arbor 7/8-inch, grit 80, medium, max rpm 8600. Type 29 angled design works at 10 to 25-degree angle, use with angle grinder. For metal and stainless steel fabrication, blending welds, deburring, cleaning, stripping and finishing, flex-abrasive (registered trademark). Zirconia alumina discs last 20x longer and remove material 3x faster than resin discs. Combines grinding capabilities of a depressed center wheel and finishing characteristics of a fiber disc thereby eliminating the switching of tools.
Neiko Roloc Type 2-Inch Flap Disc, Zirconia, 60 Grit, 10 Pieces
- 2″ x 60grit zirconia flap disc roll & lock type maximum speed 30,000 rpm 60 gritnylon base.
DEWALT DW8329 7-Inch by 5/8-Inch-11 60 Grit Zirconia Angle Grinder Flap Disc
- Type 29 fiberglass backing provides grinding angle of 20-25 degrees. Zirconia grit enables 3x faster material removal than fiber resin metal sanding discs. Premium abrasive cloth provides up to 15x’s longer life than fiber resin metal sanding discs. Premium abrasive cloth provides up to 15 x longer life than fiber resin metal sanding discs.
4.5″ x 7/8″ Premium Zirconia Flap Discs Grinding Wheels 40 Grit Type 27 – 10 Pack
- Made in accordance with ansi safety requirements. The #1 choice for welders and metal fabricators. Benchmark abrasives uses only the highest quality grains and backing material for our flap discs. For use on an angle grinder. Designed for grinding, blending, sanding and finishing on a wide range of material.
Neiko Roloc Type 3-Inch Flap Disc, Zirconia, 40 Grit, 10 Pieces
- 3″ x 40grit zirconia flap disc roll & lock type maximum speed 30,000 rpm 40 gritnylon base.
3″ Zirconia Flap Discs 120 Grit – Roll & Lock (10pc)
- Cooler grinding results in less loading and glazing than standard discs. Overlapping construction eliminates edge wear. Exta long life minimizes disc change-over time, lasts up to 20 longer than traditional discs. Allows access to small surface areas such as deep narrow channels.
4.5″ x 7/8″ Premium High Density Jumbo Zirconia Flap Disc Grinding Wheel 60 Grit Type 29 – 5 Pack
- Designed for grinding, blending and finishing on a wide range of metal. For use on an angle grinder. Made in accordance with ansi safety requirements. Benchmark abrasives uses only the highest quality grains and backing material for our flap discs. The #1 choice for welders and metal fabricators.
PACK 10 PREMIUM ZIRCONIA FLAP DISC SANDING GRINDING 4-1/2″ X 7/8″ 60 GRIT
- Disc diameter 4-inch, arbor 5/8-inch, grit 120, fine, max rpm 15300. For metal and stainless steel fabrication, blending welds, deburring, cleaning, stripping and finishing, flex-abrasive (registered trademark). Combines grinding capabilities of a depressed center wheel and finishing characteristics of a fiber disc thereby eliminating the switching of tools. Flap discs are manufactured in high quality zirconia abrasive high stock removal on coarse grits, performs well on stainless steel zirconia’s inherent feature of cooler cutting when grinding makes it a much more durable and hard wearing grain than aluminium oxide and less likely to discolour stainless steel stainless steel normal steels alloy steels non-ferrous metals and their alloys 13300rpm pack of 10pc premium quality zirconia flap disc. Zirconia alumina discs last 20x longer and remove material 3x faster than resin discs.
Mercer Industries 332T120 High Density Type 294-1/2″x 5/8″ -11 Grit 120 Zirconia Flap Disc Trimmable (10 Pack)
- High quality zirconia grain features a resin on resin bond. Cool cutting and resistant to heat and moisture. Does the job of a grinding wheel and a fiber disc. Type 29, 4-1/2-inch x 5/8-inch-11, grit 120, 10pk. Trimmable plastic backing extends the life of the disc, is lightweight, and is cost effective.
Lot of (10) Premium Zirconia Flap Disc Grinding Wheel 7″x7/8″, 100 Grit
- Exta long life minimizes disc change-over time, lasts up to 20 longer than traditional discs. Lot of (10) premium zirconia flap discs disc grinding wheel 7″x7/8″, 100 grit. Overlapping construction eliminates edge wear. Cooler grinding results in less loading and glazing than standard discs.
DEWALT DW8313 4-1/2-Inch by 5/8-Inch-11 80 Grit Zirconia Angle Grinder Flap Disc
- Type 29 fiberglass backing provides grinding angle of 20-25 degrees. Premium abrasive cloth provides up to 15x’s longer life than fiber resin metal sanding discs. Premium abrasive cloth provides up to 15 x longer life than fiber resin metal sanding discs. Zirconia grit enables 3x faster material removal than fiber resin metal sanding discs.
Dewalt Dw8310 4-1/2 Inch X 7/8 Inch 120 Grit Zirconia Flap Disc(Sold By 2 Pack) by DEWALT
- . Grinds and finishes 3 times faster (and last 15 times longer) than fiber resin discssold individuallytype 29 fiberglass backing allows the full disc to be utilized without damaging your work pieceavailable in different grits and sizes to match your machine and applicationdiameter 4-1/2 inch arbor 7/8 inch grit 120/pkg.
Forney 71935 Flap Disc, Type 27 Blue Zirconia with 7/8-Inch Arbor, 40-Grit, 7-Inch
- Blue zirconia flap discs for right angle grinders. Multiple layers of zirconia cloth flaps constantly exposing new extra sharp grinding points. Reinforced fiberglass backing plate and tested for vibration-free grinding or finishing. Laminated by state of the art automated equipment. Cuts fast and outlast sanding discs 10 to 1 for long life.
Neiko Roloc Type 2-Inch Flap Disc, Zirconia, 40 Grit, 10 Pieces
- 2″ x 40grit zirconia flap disc roll & lock type maximum speed 30,000 rpm 40 gritnylon base.
10 Pack 4-1/2″ x 7/8″ Black Hawk Zirconia Grinding & Sanding Flap Discs T27 (60 Grit)
- The various grits offered can execute jobs from rough stock removal to fine finishing. A zirconia flap disc continually produces new sharp points, creating faster cutting and a longer lifespan than aluminum oxide varieties. Black hawk zirconia flap discs are manufactured using premium zirconia grain, european cloth and fiberglass backing. These discs are built for precision, durability and ease of use.
Forney 71993 Flap Disc, Type 29 Blue Zirconia with 5/8-Inch Arbor, 80-Grit, 4-Inch
- Great flexibility for difficult work. Blue zirconia flap discs for right angle grinders. Ideal for rough or fine finishing. Multiple layers of zirconia cloth flaps constantly exposing new extra sharp grinding points. Cuts fast and outlast sanding discs 10 to 1 for long life.
4.5″ x 7/8″ Premium Zirconia Flap Disc Grinding Wheel 60 Grit Type29 – 10 Pack
- Designed for grinding, blending and finishing on a wide range of metal. The #1 choice for welders and metal fabricators. Made in accordance with ansi safety requirements. For use on an angle grinder. Benchmark abrasives uses only the highest quality grains and backing material for our flap discs.
(10) 4-1/2″ X 7/8″ Premium Zirconia Flap Disc Grinding Wheel Sand Paper 100 Grit
- Diameter45″ •arbor size 7/8″ •density standard density •material top quality. For use on 45″ angle grinders •perfect for fast stock removal or weld removal. Up to/surpasses similar products from major international labels in testing •. Items are brand new in original packaging •shape type 29 angle face •. Zirconia fabric •back plate sia fiberglass back plate •excellent quality stands.
Mercer Industries 262T060 High Density Type 274-1/2″x 5/8″ -11 Grit 60 Zirconia Flap Disc Trimmable (10 Pack)
- Trimmable plastic backing extends the life of the disc, is lightweight, and is cost effective. Does the job of a grinding wheel and a fiber disc. Type 27, 4-1/2-inch x 5/8-inch-11, grit 60, 10pk. Cool cutting and resistant to heat and moisture. High quality zirconia grain features a resin on resin bond.
Forney 71931 Flap Disc, Type 29 Blue Zirconia with 5/8-Inch-11 Threaded Arbor, 60-Grit, 4-1/2-Inch
- Multiple layers of zirconia cloth flaps constantly exposing new extra sharp grinding points. Ideal for rough or fine finishing. 45″ flap disc, type 29, 60 grit, depressed center, 5/8 11″ arbor. The product is manufactured in china. Blue zirconia flap discs for right angle grinders. Easy to use. Great flexibility for difficult work. Cuts fast and outlast sanding discs 10 to 1 for long life.
DEWALT DW8306 4-1/2-Inch by 7/8-Inch 36 Grit Zirconia Angle Grinder Flap Disc
- Premium abrasive cloth provides up to 15 x longer life than fiber resin metal sanding discs. Premium abrasive cloth provides up to 15x’s longer life than fiber resin metal sanding discs. Zirconia grit enables 3x faster material removal than fiber resin metal sanding discs. Type 29 fiberglass backing provides grinding angle of 20-25 degrees.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
