21 Coolest Flat Head Socket Caps in 2020

 

50 4-40 x 1 Stainless Steel Flat Head Socket Cap Screws Countersunk A2 18-8 InchSAE Coarse Thread Hex Allen Key Drive - MonsterBolts 50 4-40 x 1 #ad

(50) #4-40 x 1″ Stainless Steel Flat Head Socket Cap Screws Countersunk, A2 (18-8), Inch/SAE Coarse Thread, Hex (Allen) Key Drive – MonsterBolts (50, 4-40 x 1″)

(50) #4-40 x 1″ Stainless Steel Flat Head Socket Cap Screws Countersunk, A2 (18-8), Inch/SAE Coarse Thread, Hex (Allen) Key Drive – MonsterBolts (50, 4-40 x 1″) #ad - Diameter #4 thread size / pitch 40 tpi, coarse drive 1/16″ hex key type flat head socket cap screws system of measurement us/inch material alloy steel w thermal black oxide specifications astm f835, 82° head (standard)., Monster bolts, official monster-bolts fastener store this listing is for #4-40 flat head socket cap screws. These are new a2 (also called 18-8) stainless steel and use a hex (allen) key drive.

 

10 M3-050 x 12mm FT - Stainless Steel Flat Head Socket Caps Screws Countersunk DIN 7991 - A2-7018-8 - MonsterBolts 10 M3 x 12mm #ad

(10) M3-0.50 x 12mm (FT) – Stainless Steel Flat Head Socket Caps Screws Countersunk DIN 7991 – A2-70/18-8 – MonsterBolts (10, M3 x 12mm)

(10) M3-0.50 x 12mm (FT) – Stainless Steel Flat Head Socket Caps Screws Countersunk DIN 7991 – A2-70/18-8 – MonsterBolts (10, M3 x 12mm) #ad - Type flat head socket cap screw (countersunk), din 7991. Thread size / pitch 050, coarse (standard) thread. Material stainless steel grade a2 / 18-8 / type 304. Note pt = partial thread, ft = full thread (shown next to length in title above). Diameter m3 / 3mm.

 

20 M6-100 x 16mm FT - Stainless Steel Flat Head Socket Caps Screws Countersunk DIN 7991 - A2-7018-8 - MonsterBolts 20 M6 x 16mm #ad

(20) M6-1.00 x 16mm (FT) – Stainless Steel Flat Head Socket Caps Screws Countersunk DIN 7991 – A2-70/18-8 – MonsterBolts (20, M6 x 16mm)

(20) M6-1.00 x 16mm (FT) – Stainless Steel Flat Head Socket Caps Screws Countersunk DIN 7991 – A2-70/18-8 – MonsterBolts (20, M6 x 16mm) #ad - Type flat head socket cap screw (countersunk), din 7991. Note pt = partial thread, ft = full thread (shown next to length in title above). Thread size / pitch 100, coarse (standard) thread. Diameter m6 / 6mm. Material stainless steel grade a2 / 18-8 / type 304.

 

The Hillman Group 43582 6-32-Inch x 38-Inch Flat Head Socket Cap Screw 15-Pack #ad

The Hillman Group 43582 6-32-Inch x 3/8-Inch Flat Head Socket Cap Screw, 15-Pack

The Hillman Group 43582 6-32-Inch x 3/8-Inch Flat Head Socket Cap Screw, 15-Pack #ad - This screw carries a recessed internal socket drive to add strength. A flat head socket cap screw is a screw with a flat head and hexagon drive for tightening with an allen-style wrench. Used on machine parts or manufacturing equipment.

 

GooTon M6x25mm Socket Flat Countersunk Head Cap Screw Stainless Steel 25pcs #ad

GooTon M6x25mm Socket Flat Countersunk Head Cap Screw Stainless Steel 25pcs

GooTon M6x25mm Socket Flat Countersunk Head Cap Screw Stainless Steel 25pcs #ad - The flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. Socket cap screws are threaded fasteners that have a cap head with an internal socket drive for installing in areas with limited side clearance. Material stainless steel weight111g. Thread size 6 x 20mm/024″x079″(dl) total size 16 x 25mm/063″x098″(maxdl). Package included 25 pcs x countersunk bolts.

 

10 M10-150 x 40mm FT - Flat Head Socket Caps Screws Countersunk DIN 7991 - Class 129 Alloy Steel wBlack Oxide - MonsterBolts 10 M10 x 40mm #ad

(10) M10-1.50 x 40mm (FT) – Flat Head Socket Caps Screws Countersunk DIN 7991 – Class 12.9 Alloy Steel w/Black Oxide – MonsterBolts (10, M10 x 40mm)

(10) M10-1.50 x 40mm (FT) – Flat Head Socket Caps Screws Countersunk DIN 7991 – Class 12.9 Alloy Steel w/Black Oxide – MonsterBolts (10, M10 x 40mm) #ad - 9 w black ox, specifications din 7991. 50, unc / coarse thread, drive m6 / 6mm hex key, type flat head socket cap screw, system of measurement metric, material alloy steel class 12. Diameter m10 / 10mm, thread size 1.

 

Yodaoke 100pcs M3-05 x 16mm Flat Head Socket Cap Screws Alloy Steel Grade 109 DIN 7991 Allen Socket Drive with Nuts and Washers #ad

Yodaoke 100pcs M3-0.5 x 16mm Flat Head Socket Cap Screws, Alloy Steel Grade 10.9, DIN 7991, Allen Socket Drive, with Nuts and Washers

Yodaoke 100pcs M3-0.5 x 16mm Flat Head Socket Cap Screws, Alloy Steel Grade 10.9, DIN 7991, Allen Socket Drive, with Nuts and Washers #ad - Quantity 100pcs screws, 100pcs nuts and 100pcs washers. Material alloy steel grade 109. Size m3-05 x 16mm. Surface treatment black oxide.

 

Hard-to-Find Fastener 014973182168 Flat Head Socket Cap Screws 12-13 x 1 Piece-4 #ad

Hard-to-Find Fastener 014973182168 Flat Head Socket Cap Screws, 1/2-13 x 1, Piece-4

Hard-to-Find Fastener 014973182168 Flat Head Socket Cap Screws, 1/2-13 x 1, Piece-4 #ad - We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. We also sell coated and stainless products for additional rust resistance. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.

 

Yodaoke 100pcs M4-07 x 50mm Flat Head Socket Cap Screws Alloy Steel Grade 109 DIN 7991 Allen Socket Drive with Nuts and Washers #ad

Yodaoke 100pcs M4-0.7 x 50mm Flat Head Socket Cap Screws, Alloy Steel Grade 10.9, DIN 7991, Allen Socket Drive, with Nuts and Washers

Yodaoke 100pcs M4-0.7 x 50mm Flat Head Socket Cap Screws, Alloy Steel Grade 10.9, DIN 7991, Allen Socket Drive, with Nuts and Washers #ad - Quantity 100pcs screws, 100pcs nuts and 100pcs washers. Surface treatment black oxide. Material alloy steel grade 109. Size m4-07 x 50mm.

 

8-32 x 12 Flat Head Socket Cap Screws Grade 8 Steel Black Oxide Qty 100 #ad

8-32 x 1/2 Flat Head Socket Cap Screws Grade 8 Steel Black Oxide Qty 100

8-32 x 1/2 Flat Head Socket Cap Screws Grade 8 Steel Black Oxide Qty 100 #ad - Flat head screws have a flat top that tapers down to a cone shape that will sit flush into a countersunk hole and give a finished appearance and an 82 degree flat head which is the most common countersunk screw head angle.

 

50 10-32 x 1 Flat Head Socket Cap Screws Countersunk Alloy Steel wThermal Black Oxide InchSAE Fine Thread - MonsterBolts 50 10-32 x 1 #ad

(50) #10-32 x 1″ Flat Head Socket Cap Screws Countersunk, Alloy Steel w/Thermal Black Oxide, Inch/SAE Fine Thread – MonsterBolts (50, 10-32 x 1″)

(50) #10-32 x 1″ Flat Head Socket Cap Screws Countersunk, Alloy Steel w/Thermal Black Oxide, Inch/SAE Fine Thread – MonsterBolts (50, 10-32 x 1″) #ad - These are new alloy steel screws with thermal black oxide coating and use a hex (allen) key drive. Diameter #10 thread size / pitch 32 tpi, coarse drive 1/8″ hex key type flat head socket cap screws system of measurement us/inch material alloy steel w thermal black oxide specifications astm f835, countersunk 82° head (standard)., Monster bolts, official monster-bolts fastener store this listing is for #10-32 flat head socket cap screws.

 

Hard-to-Find Fastener 014973181901 Flat Head Socket Cap Screws 14-28 x 12 Piece-10 #ad

Hard-to-Find Fastener 014973181901 Flat Head Socket Cap Screws, 1/4-28 x 1/2, Piece-10

Hard-to-Find Fastener 014973181901 Flat Head Socket Cap Screws, 1/4-28 x 1/2, Piece-10 #ad - We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry.

 

10 M4-070 x 16mm FT - Stainless Steel Flat Head Socket Caps Screws Countersunk DIN 7991 - A2-7018-8 - MonsterBolts 10 M4 x 16mm #ad

(10) M4-0.70 x 16mm (FT) – Stainless Steel Flat Head Socket Caps Screws Countersunk DIN 7991 – A2-70/18-8 – MonsterBolts (10, M4 x 16mm)

(10) M4-0.70 x 16mm (FT) – Stainless Steel Flat Head Socket Caps Screws Countersunk DIN 7991 – A2-70/18-8 – MonsterBolts (10, M4 x 16mm) #ad - Thread size / pitch 070, coarse (standard) thread. Material stainless steel grade a2 / 18-8 / type 304. Type flat head socket cap screw (countersunk), din 7991. Diameter m4 / 4mm. Note pt = partial thread, ft = full thread (shown next to length in title above).

 

Cyful Stainless Steel Flat Head Socket Cap Screws Allen Socket Drive M6-10 x 35mm-25pcs #ad

Cyful Stainless Steel Flat Head Socket Cap Screws Allen Socket Drive M6-1.0 x 35mm-25pcs

Cyful Stainless Steel Flat Head Socket Cap Screws Allen Socket Drive M6-1.0 x 35mm-25pcs #ad - Package included 25 x flat head socket cap screws. With a flat head, socket cap head fasteners have a recessed driving area and offer high hold power at high torque levels. Allen socket drive made of 304 stainless steel,passivated for superior corrosion resistance. Allen socket screw carries a recessed internal socket drive to add strength,used on machine parts or manufacturing equipment. Thread diameter 6mm/1/4″pitch size10mm/0039″screw length35mm/138″allen hex drive4mm/016″.

 

The Hillman Group 44038 10-32 x 58 Flat Head Socket Cap Screw Stainless Steel 20-Pack #ad

The Hillman Group 44038 10-32 x 5/8 Flat Head Socket Cap Screw, Stainless Steel, 20-Pack

The Hillman Group 44038 10-32 x 5/8 Flat Head Socket Cap Screw, Stainless Steel, 20-Pack #ad - A flat head socket cap screw is a screw with a flat head and hexagon drive for tightneing with an allen-style wrench. This screw carries a recessed internal socket drive to add strength. Used on machine parts or manufacturing equipment.

 

8-32 x 516 - Qty 10 - Flat Head Socket Caps Screws SAE Alloy Steel Blk Oxide #ad

#8-32 x 5/16″ – Qty 10 – Flat Head Socket Caps Screws SAE Alloy Steel Blk Oxide

#8-32 x 5/16″ – Qty 10 – Flat Head Socket Caps Screws SAE Alloy Steel Blk Oxide #ad - Length 5/16″. Thread pitch 32 tpi, unc / coarse thread. Diameter #8 (or 01640″).

 

516-18 x 2 Flat Head Socket Cap Screws Allen Socket Drive Stainless Steel 18-8 Full Thread Bright Finish 10 PCS #ad

5/16-18 x 2″ Flat Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, 10 PCS

5/16-18 x 2″ Flat Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, 10 PCS #ad - Mewudecor brand is sold exclusively by mewudecor online when you purchase a mewudecor brand product, your satisfaction is guaranteed. Drive type allen hex socket 3/16 inch material stainless steel 18-8 color silver tone. Thread diameter 5/16 inch thread length 2 inch thread count 18. Package included 10 x flat head socket cap screws. The socket head cap screws are 100% stainless steel 18-8 (a2-70) which offers a high level of chemical and corrosion resistance.

 

10 M6-100 x 50mm PT - Flat Head Socket Caps Screws Countersunk DIN 7991 - Class 129 Alloy Steel wBlack Oxide - MonsterBolts 10 M6 x 50mm #ad

(10) M6-1.00 x 50mm (PT) – Flat Head Socket Caps Screws Countersunk DIN 7991 – Class 12.9 Alloy Steel w/Black Oxide – MonsterBolts (10, M6 x 50mm)

(10) M6-1.00 x 50mm (PT) – Flat Head Socket Caps Screws Countersunk DIN 7991 – Class 12.9 Alloy Steel w/Black Oxide – MonsterBolts (10, M6 x 50mm) #ad - Type flat head socket cap screw (countersunk), din 7991. Diameter m6 / 6mm. Note pt = partial thread, ft = full thread (shown next to length in title above). Thread size / pitch 10, coarse (standard) thread. Material class 129 alloy steel w thermal black oxide coating.

 

Hard-to-Find Fastener 014973182021 Flat Head Socket Cap Screws 516-24 x 34 Piece-6 #ad

Hard-to-Find Fastener 014973182021 Flat Head Socket Cap Screws, 5/16-24 x 3/4, Piece-6

Hard-to-Find Fastener 014973182021 Flat Head Socket Cap Screws, 5/16-24 x 3/4, Piece-6 #ad - We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. We also sell coated and stainless products for additional rust resistance. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry.

 

10 M8-125 x 80mm PT - Flat Head Socket Caps Screws Countersunk DIN 7991 - Class 129 Alloy Steel wBlack Oxide - MonsterBolts 10 M8 x 80mm #ad

(10) M8-1.25 x 80mm (PT) – Flat Head Socket Caps Screws Countersunk DIN 7991 – Class 12.9 Alloy Steel w/Black Oxide – MonsterBolts (10, M8 x 80mm)

(10) M8-1.25 x 80mm (PT) – Flat Head Socket Caps Screws Countersunk DIN 7991 – Class 12.9 Alloy Steel w/Black Oxide – MonsterBolts (10, M8 x 80mm) #ad - Diameter m8 / 8mm. Type flat head socket cap screw (countersunk), din 7991. Note pt = partial thread, ft = full thread (shown next to length in title above). Material class 129 alloy steel w thermal black oxide coating. Thread size / pitch 125, coarse (standard) thread.

 

10 14-20 x 2 Flat Head Socket Cap Screws Countersunk Alloy Steel wThermal Black Oxide InchSAE Coarse Thread Hex Allen Key Drive - MonsterBolts 10 14-20 x 2 #ad

(10) 1/4″-20 x 2″ Flat Head Socket Cap Screws Countersunk, Alloy Steel w/Thermal Black Oxide, Inch/SAE Coarse Thread, Hex (Allen) Key Drive – MonsterBolts (10, 1/4″-20 x 2″)

(10) 1/4″-20 x 2″ Flat Head Socket Cap Screws Countersunk, Alloy Steel w/Thermal Black Oxide, Inch/SAE Coarse Thread, Hex (Allen) Key Drive – MonsterBolts (10, 1/4″-20 x 2″) #ad - Diameter 1/4″ thread size / pitch 20 tpi, coarse drive 5/32″ hex key type flat head socket cap screws system of measurement us/inch material alloy steel w thermal black oxide specifications astm f835, countersunk 82° head (standard)., Monster bolts, official monster-bolts fastener store this listing is for 1/4″-20 flat head socket cap screws. These are new alloy steel screws with thermal black oxide coating and use a hex (allen) key drive.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.