Bosch 85529MC 1/8-Inch Kerf 3 Wing Slotting Cutter Router Bit
- Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.
Magnate 4208 Slotting Cutter Router Bits – 5/16″ Bore – 7/32″ Kerf; 4 Wing; 5/16″ Bore
- By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. 2-wing design is most popular and economically priced. Excessive overall length may cause tool damage. You may try the following suggestion. Must be used with arbors with 5/16″ spindle, such as magnate tool no. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. 4301, 4302, and 4303. In case a bit doesn’t come with a speed chart. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications.
Uxcell a16051700ux0130 1/2″ x 1/4″ Ball Bearing T-Slot T-Track Slotting Cutter Router Bit
- Cutting dia 32mm / 126″ cutting depth 635mm / 1/4″ shank dia 1/2″. Overall length 55mm / 22″ product name t-slot router bit material tungsten carbide. Weight 72g package content 1 x t-slot router bit. Main color beige, silver tone standard 1/2″ x 1/4″. Cutting width 94mm / 037″ bearing dia 127mm / 1/2″.
Magnate 4006 Slotting Cutter Router Bits – 5/16″ Bore – 5/32″ Kerf; 2 Wing; 5/16″ Bore
- 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. You may try the following suggestion. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. 2-wing design is most popular and economically priced. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Must be used with arbors with 5/16″ spindle, such as magnate tool no. 4301, 4302, and 4303. It is suited for softwoods, hardwoods, chipboard, plywood and etc. In case a bit doesn’t come with a speed chart. It is also equipped with wide open gullets for easy disposal of wood chips. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications.
Magnate 4002 Slotting Cutter Router Bits – 5/16″ Bore – 3/32″ Kerf; 2 Wing; 5/16″ Bore
- Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. You may try the following suggestion. In case a bit doesn’t come with a speed chart. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. 2-wing design is most popular and economically priced. Must be used with arbors with 5/16″ spindle, such as magnate tool no. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. 4301, 4302, and 4303. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing.
Magnate 4202 Slotting Cutter Router Bits – 5/16″ Bore – 3/32″ Kerf; 4 Wing; 5/16″ Bore
- 2-wing design is most popular and economically priced. It is suited for softwoods, hardwoods, chipboard, plywood and etc. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Must be used with arbors with 5/16″ spindle, such as magnate tool no. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is also equipped with wide open gullets for easy disposal of wood chips. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. You may try the following suggestion. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Excessive overall length may cause tool damage. 4301, 4302, and 4303. In case a bit doesn’t come with a speed chart.
Magnate 4108 Slotting Cutter Router Bits – 5/16″ Bore – 7/32″ Kerf; 3 Wing; 5/16″ Bore
- You may try the following suggestion. It is also equipped with wide open gullets for easy disposal of wood chips. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Excessive overall length may cause tool damage. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. 4301, 4302, and 4303. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. 2-wing design is most popular and economically priced. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. In case a bit doesn’t come with a speed chart. Must be used with arbors with 5/16″ spindle, such as magnate tool no. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc.
Magnate 4105 Slotting Cutter Router Bits – 5/16″ Bore – 1/4″ Kerf; 3 Wing; 5/16″ Bore
- It is precision ground, hardened, and tempered in order to stand up to a variety of materials. 2-wing design is most popular and economically priced. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. It is suited for softwoods, hardwoods, chipboard, plywood and etc. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is also equipped with wide open gullets for easy disposal of wood chips. You may try the following suggestion. 4301, 4302, and 4303. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. In case a bit doesn’t come with a speed chart. Excessive overall length may cause tool damage. Must be used with arbors with 5/16″ spindle, such as magnate tool no.
3/16″ Kerf, 3-Wing C/T Slotting Cutter Router Bit
- Color silver tone & red net weight 44g. Product name v type slotting cutter cutting diameter(approx) 127cm / 1/2”. Package content 1 x v type slotting cutter. Shank diameter 127cm / 1/2” blade length 13cm / 051”. Total length 53cm / 21” material metal.
1/2″ x 1/2″ V Type Slotting Cutter Router Bit
- Package content 1 x v type slotting cutter. Shank diameter 127cm / 1/2” blade length 13cm / 051”. Product name v type slotting cutter cutting diameter(approx) 127cm / 1/2”. Total length 53cm / 21” material metal. Color silver tone & red net weight 44g.
Magnate 4008 Slotting Cutter Router Bits – 5/16″ Bore – 7/32″ Kerf; 2 Wing; 5/16″ Bore
- Excessive overall length may cause tool damage. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. In case a bit doesn’t come with a speed chart. It is suited for softwoods, hardwoods, chipboard, plywood and etc. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. 4301, 4302, and 4303. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. You may try the following suggestion. Must be used with arbors with 5/16″ spindle, such as magnate tool no. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. 2-wing design is most popular and economically priced.
Bosch 85528M 3/32-Inch Kerf 3 Wing Slotting Cutter Router Bit
- -5/16” shank diameter. -3/32” cutting edge length. Dimensions -1/2” depth of cut. -Micrograin bit for making slots for t molding and weather stripping. -Carded. Specifications -3 wing. 85528m features -slotting cutter.
Magnate 4100 Slotting Cutter Router Bits – 5/16″ Bore – 1/16″ Kerf; 3 Wing; 5/16″ Bore
- By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. In case a bit doesn’t come with a speed chart. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. It is suited for softwoods, hardwoods, chipboard, plywood and etc. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Must be used with arbors with 5/16″ spindle, such as magnate tool no. Excessive overall length may cause tool damage. It is also equipped with wide open gullets for easy disposal of wood chips. 2-wing design is most popular and economically priced. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. 4301, 4302, and 4303. You may try the following suggestion.
Magnate 4009 Slotting Cutter Router Bits – 5/16″ Bore – 9/32″ Kerf; 2 Wing; 5/16″ Bore
- Product name v type slotting cuttercutting diameter(approx) 64mm /1/4”. Shank diameter 628mm / 1/4”blade length 36cm / 145”. 2 flute carbide tipped 9/32″ kerf 3 wing 5/16″ bore 1/2″ cutting depth 1-7/8″ overall diameter. 2 flute carbide tipped 9/32″ kerf 2 wing 5/16″ bore 1/2″ cutting depth 1-7/8″ overall diameter. Package content 1 x v type slotting cutter.
Magnate 4106 Slotting Cutter Router Bits – 5/16″ Bore – 5/32″ Kerf; 3 Wing; 5/16″ Bore
- In case a bit doesn’t come with a speed chart. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. 2-wing design is most popular and economically priced. It is also equipped with wide open gullets for easy disposal of wood chips. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. Must be used with arbors with 5/16″ spindle, such as magnate tool no. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. 4301, 4302, and 4303. It is suited for softwoods, hardwoods, chipboard, plywood and etc. You may try the following suggestion. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing.
Silver Tone Red 1/4″ x 1/4″ V Type Slotting Cutter Router Bit
- Shank diameter 628mm / 1/4”blade length 36cm / 145”. Color silver tone, rednet weight 23g. Product name v type slotting cuttercutting diameter(approx) 64mm /1/4”. Package content 1 x v type slotting cutter. Total length 47cm / 185”material metal.
Bosch 85526MC 1/16-Inch Kerf 3 Wing Slotting Cutter Router Bit
- Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.
Magnate 4000 Slotting Cutter Router Bits – 5/16″ Bore – 1/16″ Kerf; 2 Wing; 5/8″ Bore
- You may try the following suggestion. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. In case a bit doesn’t come with a speed chart. It is also equipped with wide open gullets for easy disposal of wood chips. 4301, 4302, and 4303. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Must be used with arbors with 5/16″ spindle, such as magnate tool no. 2-wing design is most popular and economically priced. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. Excessive overall length may cause tool damage.
Magnate 4001 Slotting Cutter Router Bits – 5/16″ Bore – 5/64″ Kerf; 2 Wing; 5/16″ Bore
- It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Excessive overall length may cause tool damage. Must be used with arbors with 5/16″ spindle, such as magnate tool no. 2-wing design is most popular and economically priced. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. It is also equipped with wide open gullets for easy disposal of wood chips. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. In case a bit doesn’t come with a speed chart. 4301, 4302, and 4303. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. You may try the following suggestion. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications.
Bosch 85610MC 1/4-Inch Kerf 3 Wing Slotting Cutter Router Bit
- Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.
Magnate 4104 Slotting Cutter Router Bits – 5/16″ Bore – 1/8″ Kerf; 3 Wing; 5/16″ Bore
- In case a bit doesn’t come with a speed chart. 2-wing design is most popular and economically priced. It is suited for softwoods, hardwoods, chipboard, plywood and etc. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. Must be used with arbors with 5/16″ spindle, such as magnate tool no. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. Excessive overall length may cause tool damage. 4301, 4302, and 4303. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. You may try the following suggestion. It is also equipped with wide open gullets for easy disposal of wood chips. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
