21 Top Drive Impact Sockets

 

EPAuto 1/2″ Drive Impact Socket Extension Bar Set, Cr-V, 3 Pieces - Locks onto drive tang. Corrosion-retardant black phosphate coating. Durability made from hardened treated chrome vanadium steel alloy (cr-v). Make in taiwan.

 

DEWALT Tough Box 7PC mm 1/2 Deep Drive Impact Socket Set - Directtorque technology helps prevent rounding of fasteners. O-ring and retaining pin compatible for added job-site safety. Laser etched markings for easier identification on black phosphate finishes. Heat treated cr-440 steel for strength and durability. Oil rubbed black oxide coating for corrosion resistance.

 

Stanley Proto J72102 9 Piece 6 Point 3/8″ Drive Impact Socket Set - Proto 6 point impact sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials. Heat treated for the correct balance of strength and hardness. Includes 1/4″, 5/16″, 3/8″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 7/16″, socket bar and clips. The torqueplus design allows for quick and easy socket engagement to the fastener flats, not the corners. Minimizes fastener rounding, helps to extend fastener life.

 

DEWALT 3/4″ Drive Impact Socket 6 PT 36MM - Directtorque technology helps prevent rounding of fasteners. Laser etched markings for easier identification on black phosphate finishes. Oil rubbed black oxide coating for corrosion resistance. Heat treated cr-440 steel for strength and durability. O-ring and retaining pin compatible for added job-site safety.

 

Stanley Proto J7438M 1/2-Inch Drive Impact Socket, 38mm, 6 Point - The torqueplus configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage. . The torqueplus internal design minimizes fastener rounding, helps to extend fastener life and allows the user to more easily turn worn, rounded, or rusted fasteners. The torqueplus design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners. Stanley j7438m proto 1/2-inch drive impact socket 38 mm, 6 point proto 6 point impact sockets are ideal for use on stubborn or damaged fasteners and also on fasteners made from soft materials.

 

Neiko 02499A CR-V Drive Impact Socket Set (27 Piece), 3/4″ - Sae standard and metric bmc. 7/8″,15/16″,1″,1-1/8″,1-3/16″,1-5/16″,1-3/8″,1-7/16″,1-5/8″,1-3/4″,1-7/8″,2″. 10 pc sockets 22,24,27,30,32,36,38,41,46,50mm. 1 pc ratchet handle 20″ 1 pc sliding “t” bar 18″. Sae standard and metric bmc 7/8″, 15/16″, 1″, 1-1/8″, 1-3/16″, 1-5/16″, 1-3/8″, 1-7/16″, 1-5/8″,1-3/4″,1-7/8″,2″.

 

DEWALT 3/8″ Drive Impact Socket Universal 14MM - O-ring and retaining pin compatible for added job-site safety. Heat treated cr-440 steel for strength and durability. Laser etched markings for easier identification on black phosphate finishes. Directtorque technology helps prevent rounding of fasteners. Oil rubbed black oxide coating for corrosion resistance.

 

Neiko 02410A Cr-V 7 Sockets 1/2″ Drive Impact Socket Set with Protective Sleeves - Socket body made of ultra-durable chrome-molybdenum, the strongest steel for sockets. Must-have 7-piece set for anyone working with expensive, premium car and truck wheels. Protects wheel, narrow socket casing has tough nylon sleeve, won’t scratch chrome. Nylon insert helps prevent damage to lug nut chrome or paint finish. Neiko tools impact socket set-chrome protective plastic sleeves.

 

Neiko 02443A Complete 3/8″ and 1/2″ Drive Impact Socket Set, CR-V Steel | SAE & Metric | Deep & Shallow | 38-Piece Set - 11 pieces 1/2″ dr shallow sockets 10mm, 11mm(7/16″), 12mm, 13mm, 14mm, 15mm, 16mm(5/8″), 17mm, 18mm, 21mm, 24mm(15/16″). Special 6-point flank drive design turns the flat sides of fasteners and delivers maximum torque, while not stripping and damaging the corners. Comes in a customized heavy duty case with molded size index for easy and organized storage. A unique combination of both sae & metric sizes and deep & shallow length, including 11 pcs duometric sockets to make it an actual 49-pc set. All sockets and accessories are dropped forged and heat treated for accurate hardness that reduces wear-outs and insures longevity. 10 pieces 1/2″ dr deep sockets 1/2″, 9/16″, 11/16″, 3/4″(19mm), 13/16″, 7/8″(22mm), 1″, 1-1/16″(27mm), 1-1/8″, 1-1/4″(32mm). Made from high strength chrome vanadium steel for greater torque, each piece with black electroplate finish for corrosion and oil resistance. 13 pieces 3/8″ dr shallow sockets 3/8″, 7/16″(11mm), 1/2″, 9/16″, 11/16″, 3/4″(19mm), 8mm(5/16″), 9mm, 12mm, 13mm, 14mm, 16mm(5/8″), 17mm. 3 pieces accessories 1/2″ dr x 3″ extension bar, 3/8″ dr x 3″ extension bar, 1/2″ dr (f) x 3/8″ dr (m) adapter.

 

Sunex 5300 1-Inch Drive Impact Socket Extension 6-Inch - It also features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. Forged from the finest chrome molybdenum alloy steel &ndash the best choice for strength and durability radius corner design, to extend the life of fasteners the design drives the side of the fastener instead of the corner provides increased strength, but also avoids rounding of rusted or damaged fasteners fully guaranteedthis item may not be in stock please email service@toolsource. No doubt, sunex tools offer one of the most complete and toughest impact socket lines around. Sunex 5300 1″ drive impact socket extension, 6″ length. Com for lead time. This 1&quot drive impact socket extension is 6&quot long and is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job.

 

DEWALT 19PC SAE 1/2″Drive Impact Socket Set - Oil rubbed black oxide coating for corrosion resistance. Laser etched markings for easier identification on black phosphate finishes. O-ring and retaining pin compatible for added job-site safety. Directtorque technology helps prevent rounding of fasteners. Heat treated cr-440 steel for strength and durability.

 

DEWALT 1/2″ Drive Impact Socket 6PT 29MM - Laser etched markings for easier identification on black phosphate finishes. Directtorque technology helps prevent rounding of fasteners. Heat treated cr-440 steel for strength and durability. Oil rubbed black oxide coating for corrosion resistance. O-ring and retaining pin compatible for added job-site safety.

 

DEWALT 1/2″ Drive Impact Socket Deep 6PT 24MM - Directtorque technology helps prevent rounding of fasteners. Heat treated cr-440 steel for strength and durability. O-ring and retaining pin compatible for added job-site safety. Oil rubbed black oxide coating for corrosion resistance. Laser etched markings for easier identification on black phosphate finishes.

 

DEWALT 1/2″ Drive Impact Socket 6PT 23MM - Directtorque technology helps prevent rounding of fasteners. Heat treated cr-440 steel for strength and durability. Oil rubbed black oxide coating for corrosion resistance. Laser etched markings for easier identification on black phosphate finishes. O-ring and retaining pin compatible for added job-site safety.

 

GearWrench 84902 1/4-Inch Drive Impact Socket Set SAE/Metric, 48-Piece - Finish black phosphate length format standard/deep drive tang size 1/4 drive type 6 point surface drive sae/metric sae/metric set size range min 3/16-inch, 4mm set size range max 9/16-inch, 15mm set included storage blow mold case set piece count 48 asme specification b107. 2/b107. 33m.

 

Stanley Proto J7424S 1/2-Inch Drive Impact Socket, 3/4-Inch, 8 Point - Large clearance holes, concentric opening and nut end chamfer make it easy to position socket on fasteners. Made from high-strength steel to help minimize wall thickness and provide access to fasteners in recesses and where nuts and bolts protrude. Impact sockets are used wherever powered drive tools are used to install or remove fasteners. Tight tolerances for snug fit on fastener. Drive end chamfer and four detents help provide quick positive engagement with drive tool on any of the socket drive walls.

 

DEWALT 3/4″ Drive Impact Socket Deep 6PT 17MM - Oil rubbed black oxide coating for corrosion resistance. O-ring and retaining pin compatible for added job-site safety. Laser etched markings for easier identification on black phosphate finishes. Directtorque technology helps prevent rounding of fasteners. Heat treated cr-440 steel for strength and durability.

 

DEWALT 1/2″ Drive Impact Socket Deep 6PT 26MM - Laser etched markings for easier identification on black phosphate finishes. Heat treated cr-440 steel for strength and durability. O-ring and retaining pin compatible for added job-site safety. Directtorque technology helps prevent rounding of fasteners. Oil rubbed black oxide coating for corrosion resistance.

 

DEWALT 6 PT 1/2″ Deep Drive Impact Socket 1-1/2″ SAE - O-ring and retaining pin compatible for added job-site safety. Oil rubbed black oxide coating for corrosion resistance. Heat treated cr-440 steel for strength and durability. Laser etched markings for easier identification on black phosphate finishes. Directtorque technology helps prevent rounding of fasteners.

 

GearWrench 84935 1/2-Inch Drive Impact Socket Set Deep Metric, 29-Piece - 33m. Finish black phosphate length format deep drive tang size 1/2 drive type 6 point surface drive sae/metric metric set size range min 8mm set size range max 36mm set included storage blow mold case set piece count 29 asme specification b107.

 

BSPUJ2PI 2Pc 3/8″ & 1/2″ Drive Cr-Mo Ball Type Universal Joint Impact Socket Adapter Set by CTT - Drop forged, heat treated, chrome molybdenum steel with phosphate finishhigh quality ball type swiveluse for those hard to reach areas while working and repairing automobilessizes 3/8″ & 1/2″ drive.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.