EZ-FLO 35379 Durable Kitchen Sink Trap with Captive Nut on J-bend and Reducing Washers for Tubular Drain Applications, White Polypropylene Construction, 1-1/2-inch
- Connection this sink trap has a 1-1/2-inch connection, and 1-1/2-inch and 1-1/2-inch to 1-1/4-inch reducing washer. Easy installation it features a captive nut on the j-bend which allows quick and easy installation. Material this kitchen sink trap is made of heavy-duty, durable polypropylene which provides strength. Durable the corrosion-resistant and sturdy polypropylene material of this sink trap makes it extremely durable and long-lasting. Design the beautiful white finish gives this pipe fitting a modern look.
Eastman 35315 Flexible Flanged Tailpiece with Captive Nut for Tubular Drain Applications, White, 1-1/2-inch x 12-inch
- Easy installation this flanged tailpiece is designed to be installed quickly and easily without any hassle. Dimension this white polypropylene flanged tailpiece measures 12 x 15 x 15 inches. Use this flanged tailpiece for tubular drain applications features a flexible, corrugated section for piping that allows convenient fitting in difficult spaces. Material this tailpiece is made of heavy-duty, durable polypropylene which provides strength and durability. Modern the beautiful white finish makes it look modern for any house.
1/4-20, 0.056″ Min Panel Thickness, Round Head, Clinch Captive Nut pack of 10
- 3430material steelfinish/coating zinc-platedpem part number equivalent s-0420-1. To improve its resistance to corrosion, it may receive additional finishes and coatings. 4400head height (decimal inch) 0. Steel is strong and durable but less corrosion resistant than stainless steel. They have a higher head height than pan heads. Round heads are dome shaped with flat bearing surfaces. 0560head diameter (decimal inch) 0. 3440body diameter (decimal inch) 0. 1700mounting hole diameter (decimal inch) 0. Specificationtype clinchhead shape roundsystem of measurement inchthread size (inch) 1/4-20minimum panel thickness (decimal inch) 0.
M6 Cage Nut,Stainless Steel,Pack of 30-Piece,M6 Captive Nut
- Cage nut also called captive or clip nut. The cage nut useally used to install equipment rack. A cage nut consists of a square nut in a spring steel cage which wraps around the nut.
M6x1.00, 2mm Min Panel Thickness, Hex Head, Clinch Captive Nut pack of 10
- 25material steelfinish/coating zinc-platedpem part number equivalent kfs2-m6x1-2-zi. Specificationtype clinchhead shape hexsystem of measurement metricthread size (mm) m6x1. Steel is strong and durable but less corrosion resistant than stainless steel. 20mounting hole diameter (mm) 8. 00head height (mm) 3. 00minimum panel thickness (mm) 2. 00head diameter (mm) 10. Hex heads have flat bearing surfaces, sharp corners and six uniform sides. To improve its resistance to corrosion, it may receive additional finishes and coatings. 00body diameter (mm) 8. They are used with flat washers and are tightened with wrenches in limited-clearance applications.
#8-32, 0.0399″ Min Panel Thickness, Round Head, Clinch Captive Nut pack of 3
- Specificationtype clinchhead shape roundsystem of measurement inchthread size (inch) #8-32minimum panel thickness (decimal inch) 0. 0900mounting hole diameter (decimal inch) 0. Round heads are dome shaped with flat bearing surfaces. 3100head height (decimal inch) 0. Steel is strong and durable but less corrosion resistant than stainless steel. 2120material steelfinish/coating zinc-platedpem part number equivalent s832-1. 0399head diameter (decimal inch) 0. 2130body diameter (decimal inch) 0. To improve its resistance to corrosion, it may receive additional finishes and coatings. They have a higher head height than pan heads.
5/16-18, 0.125″ Min Panel Thickness, Round Head, Clinch Captive Nut pack of 50
- Stainless steel is a strong, corrosion-resistant alloy with excellent resistance to heat. 4130body diameter (decimal inch) 0. Specificationtype clinchhead shape roundsystem of measurement inchthread size (inch) 5/16-18minimum panel thickness (decimal inch) 0. It is used in high-stress, outdoor and corrosive applications. Round heads are dome shaped with flat bearing surfaces. 1250head diameter (decimal inch) 0. They have a higher head height than pan heads. 2300mounting hole diameter (decimal inch) 0. 5000head height (decimal inch) 0. 4120material stainless steelmaterial grade 18-8finish/coating passivatedpem part number equivalent cls-0518-3.
Unicorp ESS-032-3 Round Captive Nut Self-Clinching, 10-32 Thread x .091 thk, Steel Zinc QTY-10
- 030 inches. Unicorp’s self-clinching captive nuts are installed quickly and easily. They are used to provide load-bearing threads in stainless steel panels with a minimum sheet thickness of.
#6-32, 0.0399″ Min Panel Thickness, Round Head, Clinch Captive Nut pack of 10
- 0700mounting hole diameter (decimal inch) 0. 1870material steelfinish/coating zinc-platedpem part number equivalent s632-1. Round heads are dome shaped with flat bearing surfaces. To improve its resistance to corrosion, it may receive additional finishes and coatings. They have a higher head height than pan heads. Steel is strong and durable but less corrosion resistant than stainless steel. Specificationtype clinchhead shape roundsystem of measurement inchthread size (inch) #6-32minimum panel thickness (decimal inch) 0. 2800head height (decimal inch) 0. 0399head diameter (decimal inch) 0. 1875body diameter (decimal inch) 0.
Dresselhaus Captive Nuts with Post 4 mm Galvanised M 10 x 13, Pack of 100
- 0/2049/001/10/13/17. Secure screw connection in wood. Model t bar kitchen cabinet.
20Pcs/Set Captive Nut Network Cabinet Rack Screws & Cage Nuts Assortment Kit Mounting Screws Hardware (M516)
- Wide applications, preferred fasteners for electrical cabinets of railway, vehicles, network cabinets, mechanical mold, etc. Installation ways, these cage screws and nuts are installed in square or rectangle holes. Better choice, they are the best choice to replace welding nuts. Easier to use, fast and convenient to install, they can be disassembled and repositioned. Quality guarantee, the cage nut is made of high quality nickle plated iron, these screws and nuts are sturdy and durable.
#4-40, 0.0299″ Min Panel Thickness, Round Head, Clinch Captive Nut pack of 10
- 2500head height (decimal inch) 0. Specificationtype clinchhead shape roundsystem of measurement inchthread size (inch) #4-40minimum panel thickness (decimal inch) 0. Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings. Round heads are dome shaped with flat bearing surfaces. 1660body diameter (decimal inch) 0. 0700mounting hole diameter (decimal inch) 0. They have a higher head height than pan heads. 1650material steelfinish/coating zinc-platedpem part number equivalent s440-0. 0299head diameter (decimal inch) 0.
M2.5×0.45, 1mm Min Panel Thickness, Hex Head, Clinch Captive Nut pack of 10
- 50body diameter (mm) 4. Hex heads have flat bearing surfaces, sharp corners and six uniform sides. 50head height (mm) 2. 00head diameter (mm) 5. They are used with flat washers and are tightened with wrenches in limited-clearance applications. Specificationtype clinchhead shape hexsystem of measurement metricthread size (mm) m2. 5×0. 5. 10mounting hole diameter (mm) 4. 45minimum panel thickness (mm) 1. 70material stainless steelmaterial grade 18-8finish/coating passivatedpem part number equivalent kfs2-m2. Stainless steel is a strong, corrosion-resistant alloy with excellent resistance to heat. It is used in high-stress, outdoor and corrosive applications.
M2.5×0.45, 1mm Min Panel Thickness, Hex Head, Clinch Captive Nut pack of 10
- 50body diameter (mm) 4. 5×0. Specificationtype clinchhead shape hexsystem of measurement metricthread size (mm) m2. 00head diameter (mm) 5. 5-zi. Steel is strong and durable but less corrosion resistant than stainless steel. 10mounting hole diameter (mm) 4. 70material steelfinish/coating zinc-platedpem part number equivalent kfs2-m2. To improve its resistance to corrosion, it may receive additional finishes and coatings. 45minimum panel thickness (mm) 1. 50head height (mm) 2. They are used with flat washers and are tightened with wrenches in limited-clearance applications. Hex heads have flat bearing surfaces, sharp corners and six uniform sides.
Sellerocity Air Compressor 1/4″ Compression Tube Size Unloader Hose Head Pressure 36″ Bleed Line Kit W/1/4″ Captive Nut Includes Sleeve Ferrule & Insert
- Sellerocity air compressor 1/4″ compression tube size unloader hose head pressure 36″ bleed line kit w/ 1/4″ captive nut includes sleeve ferrule & insert.
Captive Screw, 5pcs M5 304 Stainless Steel Loose Off Spring Rivet Screw Captive Nut Captive Panel Bolt(PF11-M5-0 Length 17.2mm)
- Wide scope of application widely used in metal plate, metal compartment and indoor outdoor installation. Feature drilling and tapping, locking once completed, strong bonding save construction time and improve work efficiency. Board mounting aperture 792mm / 0312inch minimum distance from hole center to board edge 835mm / 0329inch. Quality guarantee the captive nut is made of high quality 304 stainless steel, these screws and nuts are sturdy and durable. Thread size pitch m5× 08mm maximum plate thickness 092mm / 0036inch minimum plate thickness 092mm / 0036inch.
M5x0.80, 1mm Min Panel Thickness, Hex Head, Clinch Captive Nut pack of 10
- 50body diameter (mm) 6. 00head diameter (mm) 8. It is used in high-stress, outdoor and corrosive applications. 80minimum panel thickness (mm) 1. 10mounting hole diameter (mm) 6. Hex heads have flat bearing surfaces, sharp corners and six uniform sides. Specificationtype clinchhead shape hexsystem of measurement metricthread size (mm) m5x0. They are used with flat washers and are tightened with wrenches in limited-clearance applications. 00head height (mm) 3. Stainless steel is a strong, corrosion-resistant alloy with excellent resistance to heat. 75material stainless steelmaterial grade 18-8finish/coating passivatedpem part number equivalent kfs2-m5-1.
20Pcs/Set Captive Nut Network Cabinet Rack Screws & Cage Nuts Assortment Kit Mounting Screws Hardware (M616)
- Better choice, they are the best choice to replace welding nuts. Installation ways, these cage screws and nuts are installed in square or rectangle holes. Easier to use, fast and convenient to install, they can be disassembled and repositioned. Quality guarantee, the cage nut is made of high quality nickle plated iron, these screws and nuts are sturdy and durable. Wide applications, preferred fasteners for electrical cabinets of railway, vehicles, network cabinets, mechanical mold, etc.
uxcell 20pcs M12 Carbon Steel Captive Cage Nut Brass Tone for Server Shelf Cabinet
- Overall size 21 x 19 x 18mm / 083″ x 075″ x 071″ (lwt). Thread dia m12. Product name cage nut package content 20pcs x cage nut. Fit hole size 15 x 15mm / 059″ x 059″ (lw) fit panel thickness 08-4mm / 003″-016”. Main color brass tone material carbon steel weight 286g finish zinc plated.
Captive Screw, 5pcs M3 304 Stainless Steel Loose Off Spring Rivet Screw Captive Nut Captive Panel Bolt(PF11-M3-0 Length 12.3mm)
- Feature drilling and tapping, locking once completed, strong bonding save construction time and improve work efficiency. Quality guarantee the captive nut is made of high quality 304 stainless steel, these screws and nuts are sturdy and durable. Board mounting aperture 556mm / 0219inch minimum distance from hole center to board edge 711mm / 028inch. Wide scope of application widely used in metal plate, metal compartment and indoor outdoor installation. Thread size pitch m3 05mm / 0118 00197inch maximum plate thickness 092mm / 0036inch minimum plate thickness 092mm / 0036inch.
M4x0.70, 2mm Min Panel Thickness, Hex Head, Clinch Captive Nut pack of 10
- They are used with flat washers and are tightened with wrenches in limited-clearance applications. 70minimum panel thickness (mm) 2. 70material steelfinish/coating zinc-platedpem part number equivalent kfs2-m4-2-zi. 00head diameter (mm) 7. Steel is strong and durable but less corrosion resistant than stainless steel. 70mounting hole diameter (mm) 5. 50body diameter (mm) 5. Hex heads have flat bearing surfaces, sharp corners and six uniform sides. To improve its resistance to corrosion, it may receive additional finishes and coatings. Specificationtype clinchhead shape hexsystem of measurement metricthread size (mm) m4x0. 00head height (mm) 2.
RACK FIXING CAPTIVE NUT Thread Size – Metric M6 Thread Size M6
- Rack fixing captive nutrack fixing captive nut thread size, imperial- thread size, metricm6 thread sizem6item type enclosures & 19″ cabinet rackspack size 4standard weight 17grohs status tba.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
