MaxTool 5/8″ Twist Drill Bits with Morse Taper Shank; Quality High Speed Steel M2; Black Oxide; 118 Deg Conventional Chisel; MT No2; TS02B05R40
- The drills confirm to one of ansi/asme b9411m, nas907, and uscti standard fl 4-7/8″ oal 8-3/4″. Quality hss m2 ensures sharp, fast in any material, offers good hardness, toughness, wear resistance. Mt shank allows drills installed directly into the machine’s spindle for high-torque applications. Good surface holds up lubricant better and lead coolant near the cutting edge for smoother drilling. Premium heat treated hrc63-66 is durable and can withstand heavy duty operation for a long tool life.
2MT TO 2JT DRILL CHUCK ARBOR HARDENED MT2 JT2 JACOBS MORSE TAPER SHANK
- Long end is 2mt, short end is 2jt arbor will fit all drill chucks that with a 2jt bore and will fit on any machine tool with a 2mt spindle this arbor has a 3/8-16 drawbar thread. Made of precision ground, high grade tool steel. Morse taper #2 (2mt) to jacobs taper #2 (2jt). Our part # all-49516.
5/8″ Expanding Mandrel/Arbor with #2 Morse Taper Shank
- —Requires use of a 3/8″ -16 draw bar. 010 inches working length is 2-5/8 inches mounting shank is # 2 morse taper with a 3/8-16 internal thread for draw bars. Expanding machinable arbor working diameter is 5/8″ (. 625) , designed to expand up to. Made from 12l14 soft machinable steel.
5/8″ Expanding Arbor with #1 Morse Taper Shank
- 625) , designed to expand up to. Expanding machinable arbor working diameter is 5/8″ (. 010 inches working length is 2-5/8 inches mounting shank is # 1 morse taper with a 1/4-20 internal thread for draw bars made from 12l14 soft machinable steel.
MT2 JT3 Tanged End Drill Chuck Arbor Morse Taper Shank Holder MT2 JT3 Shank
- Made of precision ground, high grade tool steel. Morse taper #2 (2mt) to jacobs taper #3 (3jt). Arbor will fit for all drill chucks that with a 3jt bore and will fit on any machine tool with a 2mt spindle. High quality. Long end (with tang) is 2mt, short end is 3jt.
Precision Twist 209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 17/32″
- Morse taper shank, for a secure and accurate tool-holding system. 118-degree conventional point angles for general drilling applications. Black oxide finish, improves lubricity, resists corrosion, and will not chip or flake off. Long length drill bits (also called taper length), have longer flutes and overall lengths than jobber drill bits. High-speed steel (hss), for use on a wide variety of materials.
Drill Chuck Arbor 4MT to 3JT Tang Hardened MT4 3JT Morse Taper Shank Arbor for Lathes and Drill Presses
- Morse taper #4 (4mt) to jacobs taper #3 (3jt). Made of precision ground, high grade tool steel. Arbor will fit for all drill chucks that with a 3jt bore and will fit on any machine tool with a 4mt spindle. Wide application. Long end (with tang) is 4mt, short end is 3jt.
XtremeAmazing MT2 JT3 Tanged End Drill Chuck Arbor Morse Taper Shank Holder MT2 JT3 Shank
- Brand new and high quality fast shipping from california specification brand new model mt2-jt3 long end mt2 short end jt3 drawbar thread3/8-16 compatible with all drill chucks that with a 3jt bore and will fit on any machine tool with a 2mt spindle you will get 1 piece of mt2 jt3 morse taper shank.
Michigan Drill 299H Series High-Speed Steel Coolant Inducer Socket, 3 Morse Taper Shank, 8-1/2″ Length (Pack of 1)
- 8-1/2-inches length. #3 morse taper hole and shank size. Michigan drill high-speed steel coolant inducer socket for use with taper shank oil hole drill.
Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1″ Size (Pack of 1)
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 118 degrees conventional point. 1-inches size.
BE-TOOL Morse Taper Shank Drill Bit, 5Pcs HSS Steel Twist Drilling Metal Bit For Woodworking Tool – 14mm
- ■High performance twist drill bit with morse taper shank for high precise drilling of larger bore diameter. ■High speed steel (hss) offers good hardness, toughness and wear resistance. ■Drilling and tapping in one, improve working efficiency, one-step processing, greatly save processing steps and time costs. ■designed for drilling in wood, aluminum, malleable iron, plastic etc. ■Self-centering point, do not need assistant center drilling or center punching.
Union Butterfield 4579 High-Speed Steel Construction Reamer, Right Hand Spiral Flute, Morse Taper Shank, Uncoated (Bright), 25/64 inch
- Spiral construction protects interrupted cuts by preventing whole-flute contact with the leading edge of the interruption. Left-hand spiral design pushes chips ahead of the tool into the hole. Morse taper shank for accurate alignment and firm hold in the socket of a tool holder. Black oxide coating will not chip improves lubricity, resists corrosion, and helps to prevent buildup and welding on the cutting edge. High-speed steel (hss) is compatible with a variety of materials.
13MM Keyless Drill Chuck with MT1 Morse Taper Shank Hardware Tool
- 1 -15mm + mt1 10mmmt 1 = thin 95 mm, thick 120 mm. High precision, high gripping force, high reliability and stability. Heavy duty design, suitable for cnc lathe, milling, drill press and other. Shipping included 1 x morse taper shank and 1 x keyless drill chuck. Self-tightening key-less.
2MT TO 3JT DRILL CHUCK ARBOR HARDENED MT2 JT3 JACOBS MORSE TAPER SHANK
- Long end is 2mt, short end is 3jt arbor will fit all drill chucks that with a 3jt bore and will fit on any machine tool with a 2mt spindle this arbor has a 3/8-16 drawbar thread. Made of precision ground, high grade tool steel. Morse taper #2 (2mt) to jacobs taper #3 (3jt). Our part # all-49517.
Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 25/32″ Size (Pack of 1)
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. 25/32-inches size. 118 degrees conventional point.
Drill Chuck Arbor 2MT to 3JT Tang Hardened MT2 3JT Morse Taper Shank Arbor for Lathes and Drill Presses
- Long end (with tang) is 2mt, short end is 3jt. Made of precision ground, high grade tool steel. Morse taper #2 (2mt) to jacobs taper #3 (3jt). Wide application. Arbor will fit for all drill chucks that with a 3jt bore and will fit on any machine tool with a 2mt spindle.
Drill Chuck Arbor 2MT to 2JT Tang Hardened MT2 2JT Morse Taper Shank Arbor for Lathes and Drill Presses
- Arbor will fit for all drill chucks that with a 2jt bore and will fit on any machine tool with a 2mt spindle. Wide application. Made of precision ground, high grade tool steel. Long end (with tang) is 2mt, short end is 2jt. Morse taper #2 (2mt) to jacobs taper #2 (2jt).
SD&ZC MT2 ER32 M10 Collet Chuck Morse Taper+shank+Spring Collets CNC Millling Kit NEW
- Collet must be assembled into the clamping nut before inserting into the chuck. Available in the bt er extension rod handle, can be used for clamping drill, milling cutter, straight shank tool. This is a “brand new” precision collet chuck holder for professionals and hobbyists demanding. Before using this tool, please measurement tool deflection, tool deflection accuracy exceeds 001mm, please correct before cutting. The tool extends the length of the chuck as short as possible, the tool extends the amount of time longer，if extended, please cut their own speed, feed rate or cutting the amount.
Precision Twist S209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1 1/8″
- 118-degree conventional point angles good for general drilling applications. High-speed steel, for use on a wide variety of materials. Long length drill bits (also called taper length), have longer flutes and overall lengths than jobber drill bits. Morse taper shank, secure and accurate tool-holding system. Black oxide finish, improves lubricity, resists corrosion, and will not chip or flake off.
Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 61/64″ Size (Pack of 1)
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 118 degrees conventional point. 61/64-inches size. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters.
Morse Cutting Tools 10042 Taper Shank Drill, High Speed Steel, 2 MTS, 118 degree Point, 21/32″, Black Oxide Finish
- Recommended for production work in wide variety of materials. Black oxide surface treatment increases wear resistance, reduces galling and chip welding improves chip flow and increases drill lubricant retention.
Michigan Drill 203 Series High-Speed Steel General Purpose Drill Bit, 1 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 37/64″ Size (Pack of 1)
- Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 37/64-inches size. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 118 degrees conventional point.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
