23 Coolest Countersink Sets

 

Insty Bit 82603 Quick Change Taper Drill Countersink Set

Insty Bit 82603 Quick Change Taper Drill Countersink Set

Insty Bit 82603 Quick Change Taper Drill Countersink Set - Adjustable smooth cutting 4-flute countersink. Install screws flush or recessed in 3/8″ counterbore. Drills precise tapered holes in wood. 1/4″ hex shank. Includes bits for #6, #8 and #10 screws.

 

AccusizeTools - 6 Flute HSS Machine Countersink 8 PcsSet 82 Degree Precision Ground 0206-1018

AccusizeTools – 6 Flute HSS Machine Countersink 8 Pcs/Set 82 Degree, Precision Ground, #0206-1018

AccusizeTools – 6 Flute HSS Machine Countersink 8 Pcs/Set 82 Degree, Precision Ground, #0206-1018 - One of each 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8” & 1”. Made of hss and precision ground. 8 pcs/set. Angle 82°.

 

Grizzly H2994 5-Piece 6 Flute Countersink Set 60andNo186

Grizzly H2994 5-Piece 6 Flute Countersink Set, 60andNo.186;

Grizzly H2994 5-Piece 6 Flute Countersink Set, 60andNo.186; - You can expect fine finishes with less cutting pressure from these centerless, high speed steel countersink sets. . Choose the 60 degree set for deburring, champhering and general countersinking tasks. The 82 degree set will do all of that and countersink for screws, too each set includes these sizes 1/4″, 3/8″, 1/2″, 3/4″, 1″.

 

MAFORD 6 Flute Countersink Sets - Tool Material High Speed Steel Included Angle 82° No of Flutes 6

M.A.FORD 6 Flute Countersink Sets – Tool Material: High Speed Steel Included Angle: 82° No of Flutes: 6

M.A.FORD 6 Flute Countersink Sets – Tool Material: High Speed Steel Included Angle: 82° No of Flutes: 6 - Smaller chip loads & chatter-free machining. Steam homo surface treatment (blackening) to prolong tool life and prevent galling. For economical, general purpose countersinking, chamfering or deburring. Made in usa.

 

Amana TDS-500 5 Piece Countersink Drill Set

Amana TDS-500 5 Piece Countersink Drill Set

Amana TDS-500 5 Piece Countersink Drill Set - Ideal for use in portable applications and materials, including metal, plastic and wood, especially in the glass and window design industry. Chatter less finish. Carbide tipped. Contents include 82 degree pilotless/round csk6s, csk8s, csk10s, csk18 and case. Easily sharpened by using a small mounted grinding wheel inserted in the hole.

 

Sommerfelds Tapered Drill and Countersink Set

Sommerfeld’s Tapered Drill and Countersink Set

Sommerfeld’s Tapered Drill and Countersink Set - Designed for all woods, plywood and composite wood materials. Includes stop collars for 3/8″ and 1/2″ drills and allen wrenches. Includes 3/8″ and 1/2″ high-carbon, heat treated plug cutters. Perfect set for 5 most popular screw sizes #6, #8, #10, #12, #14. Industrial quality high-speed-steel tapered drill bits with countersink.

 

Champion CSK-SET-5 Zero Flute 82-Degree Countersink Set 5-Piece

Champion CSK-SET-5 Zero Flute 82-Degree Countersink Set, 5-Piece

Champion CSK-SET-5 Zero Flute 82-Degree Countersink Set, 5-Piece - Single cutting edge for fast stock removal and free-cutting. Ideal for use in portable applications and materials, including metal, plastic and wood, especially in the glass and window design industry. Chatter less finish. Contents include 82 degree csk5s, csk6s, csk8s, csk10s, csk18 and case. Easily sharpened by using a small mounted grinding wheel inserted in the hole.

 

RUIMI 5-Piece titanium Countersink Drill Bit Set with 14 Hex Shank SetsScrew hole Size Counter drill bit

RUIMI 5-Piece titanium Countersink Drill Bit Set with 1/4 Hex Shank Sets,Screw hole Size Counter drill bit

RUIMI 5-Piece titanium Countersink Drill Bit Set with 1/4 Hex Shank Sets,Screw hole Size Counter drill bit - Adjustable counter sleeve depth with allen wrench. Standard 1/4-inch hex shank is quick change compatible. 30 day money back gaurentee. 5 piece titanium countersink drill bit set includes bits for drilling pilot holes for screw sizes #5, #6, #8, #10, and #12. Special designed steel counter sleeve countersinks or counterbores pilot hole.

 

Snappy 43400 Chuck Countersink Set 3 Piece

Snappy 43400 Chuck & Countersink Set 3 Piece

Snappy 43400 Chuck & Countersink Set 3 Piece - The combination drill, countersink & counter bore for wood plugs are made of alloy steel & thru hardened for long life plus the ability to resharpened. Two flute construction for fast & clean chip removal. Made in usa by snappy. Allows you to quickly & easily change drill bits & accessories with no hassle or chuck key. 7/64″ bit w/ 3/8″ counterbore. Contains snappy part numbers 40011, 43007, 43008 & 43009. Two flute construction for fast & clean chip removal. Alloy steel & thru hardened for long life, can be resharpened. Made in usa by snappy. Highlights- 3 piece. The countersink angle is 82 degrees. The standard drill bit can be replaced or adjusted for the length of the screw. The standard hex shank on the countersink fits all power bit quick change chucks.

 

AccusizeTools - 3 PcsSet Indexable Carbide Countersink Set 90 Degree 14 12 1-14 0046-0990

AccusizeTools – 3 Pcs/Set Indexable Carbide Countersink Set 90 Degree, 1/4”, 1/2”, 1-1/4”, #0046-0990

AccusizeTools – 3 Pcs/Set Indexable Carbide Countersink Set 90 Degree, 1/4”, 1/2”, 1-1/4”, #0046-0990 - 3 pcs/set 1/4”, 1/2”, 1-1/4”. Carbide indexable. 90 degree. No tool resharpening needed comes with inserts. Positive rake makes for smooth cutting without chatter.

 

KEO 53519 Cobalt Steel Single-End Countersink Set Uncoated Bright Finish 82 Degree Point Angle 516 - 1 Head Diameter

KEO 53519 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, 82 Degree Point Angle, 5/16″ – 1″ Head Diameter

KEO 53519 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, 82 Degree Point Angle, 5/16″ – 1″ Head Diameter - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Straight shank, cnc precision cam ground, m35 cobalt, chatter-free cutting action. Made in great britain. 82 degree angle.

 

44300 3pc Set Of Taperd Countersink Set 40040

44300 3pc Set Of Taperd Countersink Set (40040)

44300 3pc Set Of Taperd Countersink Set (40040) - For economical, general purpose countersinking, chamfering or deburring. New design, now featuring a reusable hex shank for use with round shank tapered twist drills. Smaller chip loads & chatter-free machining. Made in usa.

 

Inton 7pcs HSS 5 Flute Countersink Drill Bit Set Carpentry Reamer Woodworking Chamfer End Milling 3mm-10mm

Inton 7pcs HSS 5 Flute Countersink Drill Bit Set Carpentry Reamer Woodworking Chamfer End Milling 3mm-10mm

Inton 7pcs HSS 5 Flute Countersink Drill Bit Set Carpentry Reamer Woodworking Chamfer End Milling 3mm-10mm - Material hss drill black chamfer drill body material steel. It is suitable for drilling machines with chuck, for drilling on hard wood or wooden floor. Special designed steel counter sleeve countersinks or counter bores pilot hole. Drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew. 7 piece sizes sizes 3mm(012″),4mm(016″),5mm(020″),6mm(024″),7mm(028″),8mm(031″),10mm(039″).

 

4PC Countersink Bit Set

4PC Countersink Bit Set

4PC Countersink Bit Set - Jore #st-05714 4pc countersink bit set. Jore corporation.

 

Makita 784859-A Quad-Driver 11 Piece Pre-Drill Drive and Countersink Set

Makita 784859-A Quad-Driver 11 Piece Pre-Drill, Drive and Countersink Set

Makita 784859-A Quad-Driver 11 Piece Pre-Drill, Drive and Countersink Set - Weighs 9 pounds shipped. Change from a drill and countersink to a power screwdriver. Industrial quad-driver modular set for use in securing drill bits, countersinks, and screwdriver bits. This set lets you do 4 jobs with 1 drill. Includes quad driver shaft, built-in hex key, #6, #8, #10, #12 countersink drivers, and case.

 

Century Drill and Tool 37405 Countersink 5 Pc Set

Century Drill and Tool 37405 Countersink 5 Pc. Set

Century Drill and Tool 37405 Countersink 5 Pc. Set - Adjustable four-cutter counterbore for fast, smooth cuts in all types of wood and plastic. Drill the correct pilot hole and recess for countersinking a screw all in one step. Drills tapered to match the profile of traditional woodworking screws. Loosen to adjust the depth for variable length screws. 5-piece countersink set for screw sizes #4, #6, #8, #10, and #12.

 

Industrial Countersink Drill Bit  5pc Set Tri-Flat Shank Quick Change 14-34

Industrial Countersink Drill Bit | 5pc Set Tri-Flat Shank Quick Change 1/4″-3/4″

Industrial Countersink Drill Bit | 5pc Set Tri-Flat Shank Quick Change 1/4″-3/4″ - #Countersink bits 4. Quickly and easily cuts soft metal, wood, rubber, plastic and other machinable materials. Includes aluminum storage case. Sizes include 1/4″, 3/8″, 1/2″, 5/8″, 3/4″.

 

60 Degree Bit HSS Combined Center Drills Countersinks Set Tool

60 Degree Bit HSS Combined Center Drills Countersinks Set Tool

60 Degree Bit HSS Combined Center Drills Countersinks Set Tool - 5mm drill tip diameter 6mm body diameter & 2. 15 drill tip diameter 12mm body diameter & 5mm drill tip diameter usage center and spotting drills are traditionally used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking used for producing center holds in components or work pieces with require machining between centers package included 5 x hss center drills. 60combined center drills is available now from our us and uk warehouse free shipping to us and uk in 3-6 business days ship to canada, brazil in 7-10 days in us warehouse ship to european countries in 7-10 days in uk warehouse description 60 degree bit hss combined center drills countersinks set tool features material hss high speed steel standard 60 degree included angle double ended specification this listing is for a set of 5 hss center drills each drill has a double end and is ground with a standard 60 degree included angle the set includes 1 each of the following sizes 3mm body diameter & 1mm drill tip diameter 4mm body diameter & 1. 5mm drill tip diameter 8mm body diameter & 3.

 

14 Hex Shank HCS 90 Degree 5 Flute 12mm16mm19mm Chamfer Chamfering End Mill Cutter Bit Countersink Set 3PcsSet

1/4″ Hex Shank HCS 90 Degree 5 Flute 12mm/16mm/19mm Chamfer Chamfering End Mill Cutter Bit Countersink Set 3Pcs/Set

1/4″ Hex Shank HCS 90 Degree 5 Flute 12mm/16mm/19mm Chamfer Chamfering End Mill Cutter Bit Countersink Set 3Pcs/Set - Precision-ground 90 degree tip for countersinking into wood plate or thin plastic plate. 1/4″ round shank fits all handheld and stationary drills. Noteplease do not use this chamfer on the metal material. Material high carbon steel. Five flute design reduces vibration for smoother drilling and extended life.

 

Irwin Hanson AHN-1877791 5Piece Countersink Set

Irwin Hanson AHN-1877791 5Piece Countersink Set

Irwin Hanson AHN-1877791 5Piece Countersink Set - Counter skin set. Great gift idea. Package quantity 1. Excellent quality. 5 piece.

 

Champion CSK-SET-4 Zero Flute 82-Degree Countersink Set 4-Piece

Champion CSK-SET-4 Zero Flute 82-Degree Countersink Set, 4-Piece

Champion CSK-SET-4 Zero Flute 82-Degree Countersink Set, 4-Piece - Chatter less finish. Single cutting edge for fast stock removal and free-cutting. Easily sharpened by using a small mounted grinding wheel inserted in the hole. Contents include 82 degree pilotless/round csk6s, csk8s, csk10s, csk18 and case. Ideal for use in portable applications and materials, including metal, plastic and wood, especially in the glass and window design industry.

 

Rockler 18-Pc Self-Centering Countersink Set

Rockler 18-Pc. Self-Centering & Countersink Set

Rockler 18-Pc. Self-Centering & Countersink Set - Then slip off the insty-driver and do it again. Step 2 slip on the rockler insty-driver which fits over rockler countersink and self-centering bits. Inluded self-centering bits ensure accurate hinge and hardware installation every time. Countersink has a 4 flute design for smooth, clean holes that do not require sanding. Switch from drilling to driving instantly just drill the pilot hole, slip on the insty-driver and drive home the screws. Bits can be resharpened easily on a bench grinder. 18-piece rockler/insty-drive self-centering and countersink set lets you convert from drilling and countersinking to installing perfectly centered hinge screws in a matter of seconds, without re-chucking any bits the 18-piece set includes #6, #8 and #10 hss 2-flute tapered hex shank bits with 4-flute countersinks #6, #8 and #10 hex shank hss self-centering bits rockler’s insty-driver 10 of the most popular drive bits and a nylon pouch with belt loop. All rockler/insty-drive bits are precision-ground high speed steel that resist wear and overheating, thus keeping a sharp edge longer. Components are engineered to meet the highest standards for use in industrial applications. Step 3 drive home the screws. Magnetic tip holds all 1/4” style insert bits and screws. You’ll get fast and accurate hardware installation every time. How the rockler/insty-drive system works step 1 drill the pilot hole with the countersink bits or the self-centering bits, which both have a hex shank to prevent slipping. Taper drill bit is adjustable to match length of screw and is held with 1 or 2 hex set screws.

 

HHIP 2000-0031 5 Piece 82 Degree-14~1 Inch HSS Countersink Set

HHIP 2000-0031 5 Piece (82 Degree-1/4~1 Inch) HSS Countersink Set

HHIP 2000-0031 5 Piece (82 Degree-1/4~1 Inch) HSS Countersink Set - High speed steel or cobalt 5 pc sets 1/4, 3/8, 1/2, 3/4 & 1″. For portable and machine work when operated at comparatively high speeds. 5 pc sets 1/4, 3/8, 1/2, 3/4 & 1″single flutes will countersink holes much smaller than multi-flute tools high speed steel or cobalt. 82 degrees hss.