23 Most Wanted Drill Points for 2019

 

DEWALT DW1916-14-Inch Gold Ferrous Oxide Pilot Point Twist Drill Bit #ad

DEWALT DW1916-1/4-Inch Gold Ferrous Oxide Pilot Point Twist Drill Bit

DEWALT DW1916-1/4-Inch Gold Ferrous Oxide Pilot Point Twist Drill Bit #ad - Pilot point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Note sizes 1/16-inch to 11/64-inch are split point drill bits std jobber length fractional sizes. The product is 1/4″ split pt drill bit. The product is manufactured in china. Easy to use. No-spin shank eliminates the frustration of bit spinning in the chuck.

 

410 Stainless Steel Self-Drilling Screw Plain Finish Modified Truss Head Phillips Drive 3 Drill Point 10-16 Thread Size 1 Length Pack of 25 #ad

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 1″ Length (Pack of 25)

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 1″ Length (Pack of 25) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Modified truss head is extra wide with a low-profile dome and integral round washer.

 

410 Stainless Steel Self-Drilling Screw Plain Finish Pan Head Square Drive 2 Drill Point 8-18 Thread Size 1 Length Pack of 25 #ad

410 Stainless Steel Self-Drilling Screw, Plain Finish, Pan Head, Square Drive, #2 Drill Point, #8-18 Thread Size, 1″ Length (Pack of 25)

410 Stainless Steel Self-Drilling Screw, Plain Finish, Pan Head, Square Drive, #2 Drill Point, #8-18 Thread Size, 1″ Length (Pack of 25) #ad - Pan head has a flat top and short vertical sides with a rounded top edge. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Square drive resists slippage better than a phillips or slotted drive. Plain surface has no finish or coating.

 

Steel Self-Drilling Screw Zinc Plated Finish Undercut 82 Degree Flat Head Phillips Drive 3 Drill Point 12-14 Thread Size 3 Length Pack of 25 #ad

Steel Self-Drilling Screw, Zinc Plated Finish, Undercut 82 Degree Flat Head, Phillips Drive, #3 Drill Point, #12-14 Thread Size, 3″ Length (Pack of 25)

Steel Self-Drilling Screw, Zinc Plated Finish, Undercut 82 Degree Flat Head, Phillips Drive, #3 Drill Point, #12-14 Thread Size, 3″ Length (Pack of 25) #ad - Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

18-8 Stainless Steel Self-Drilling Screw Plain Finish Pan Head Phillips Drive 2 Drill Point 8-18 Thread Size 1-14 Length Pack of 25 #ad

18-8 Stainless Steel Self-Drilling Screw, Plain Finish, Pan Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/4″ Length (Pack of 25)

18-8 Stainless Steel Self-Drilling Screw, Plain Finish, Pan Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/4″ Length (Pack of 25) #ad - Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating. 18-8 stainless steel provides good corrosion resistance and strength.

 

Steel Self-Drilling Screw Zinc Plated Finish Flat Trim Head Square Drive 2 Drill Point 6-20 Thread Size 2-14 Length Pack of 50 #ad

Steel Self-Drilling Screw, Zinc Plated Finish, Flat Trim Head, Square Drive, #2 Drill Point, #6-20 Thread Size, 2-1/4″ Length (Pack of 50)

Steel Self-Drilling Screw, Zinc Plated Finish, Flat Trim Head, Square Drive, #2 Drill Point, #6-20 Thread Size, 2-1/4″ Length (Pack of 50) #ad - Zinc plating resists corrosion and has a reflective appearance. Square drive resists slippage better than a phillips or slotted drive. Trim head has a flat top and is smaller than other screw heads for less visibility when installed. Steel is often used in applications where strength is the primary consideration.

 

Steel Self-Drilling Screw Zinc Plated Finish Sealing Hex Washer Head With EPDM Washer Hex Drive 3 Drill Point 12-24 Thread Size 78 Length Pack of 25 #ad

Steel Self-Drilling Screw, Zinc Plated Finish, Sealing Hex Washer Head With EPDM Washer, Hex Drive, #3 Drill Point, #12-24 Thread Size, 7/8″ Length (Pack of 25)

Steel Self-Drilling Screw, Zinc Plated Finish, Sealing Hex Washer Head With EPDM Washer, Hex Drive, #3 Drill Point, #12-24 Thread Size, 7/8″ Length (Pack of 25) #ad - Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Sealing hex washer head has a flange with an epdm rubber washer bonded to the underside to resist leakage, loosening, and damage to the mating surface.

 

Steel Self-Drilling Screw Zinc Plated Finish Modified Truss Head Phillips Drive 2 Drill Point 8-18 Thread Size 34 Length Pack of 100 #ad

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4″ Length (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4″ Length (Pack of 100) #ad - Zinc plating resists corrosion and has a reflective appearance. Modified truss head is extra wide with a low-profile dome and integral round washer. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Self-Drilling Screw Zinc Plated Finish Undercut 82 Degree Flat Head Phillips Drive 2 Drill Point 8-18 Thread Size 1-12 Length Pack of 50 #ad

Steel Self-Drilling Screw, Zinc Plated Finish, Undercut 82 Degree Flat Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/2″ Length (Pack of 50)

Steel Self-Drilling Screw, Zinc Plated Finish, Undercut 82 Degree Flat Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/2″ Length (Pack of 50) #ad - Steel is often used in applications where strength is the primary consideration. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance.

 

410 Stainless Steel Self-Drilling Screw Plain Finish Modified Truss Head Phillips Drive 3 Drill Point 10-16 Thread Size 34 Length Pack of 25 #ad

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3/4″ Length (Pack of 25)

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3/4″ Length (Pack of 25) #ad - 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Plain surface has no finish or coating. Modified truss head is extra wide with a low-profile dome and integral round washer. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Self-Drilling Screw Zinc Plated Finish Modified Truss Head Phillips Drive 2 Drill Point 8-18 Thread Size 2 Length Pack of 50 #ad

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 2″ Length (Pack of 50)

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 2″ Length (Pack of 50) #ad - Zinc plating resists corrosion and has a reflective appearance. Modified truss head is extra wide with a low-profile dome and integral round washer. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration.

 

Zinc Plated Steel Self-Drilling Screw Pan Head Phillips Drive 2 Drill Point 4-24 Thread Size 1 inches Length Pack of 100 #ad

Zinc Plated Steel Self-Drilling Screw, Pan Head, Phillips Drive, #2 Drill Point, #4-24 Thread Size, 1 inches Length (Pack of 100)

Zinc Plated Steel Self-Drilling Screw, Pan Head, Phillips Drive, #2 Drill Point, #4-24 Thread Size, 1 inches Length (Pack of 100) #ad - Phillips drive is designed to cam out under too much torque. Pan head allows for higher tightening torques. Create their own threads when driven into material. Zinc plated steel fasteners are suitable where strength and corrosion resistance are primary considerations.

 

18-8 Stainless Steel Self-Drilling Screw Plain Finish 82 Degree Flat Head Phillips Drive 2 Drill Point 8-18 Thread Size 1 Length Pack of 25 #ad

18-8 Stainless Steel Self-Drilling Screw, Plain Finish, 82 Degree Flat Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1″ Length (Pack of 25)

18-8 Stainless Steel Self-Drilling Screw, Plain Finish, 82 Degree Flat Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1″ Length (Pack of 25) #ad - Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Plain surface has no finish or coating. 18-8 stainless steel provides good corrosion resistance and strength. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

PRECISION TWIST Cobalt Taper Shank Twist Drills-Tool Material Cobalt Shank Style Taper Shank Flute Shape Helical Flutes Drill Point Angle 135° Overall Length  10 Size  1116 #ad

PRECISION TWIST Cobalt Taper Shank Twist Drills-Tool Material: Cobalt Shank Style: Taper Shank Flute Shape: Helical Flutes Drill Point Angle: 135° Overall Length : 10″ Size : 11/16″

PRECISION TWIST Cobalt Taper Shank Twist Drills-Tool Material: Cobalt Shank Style: Taper Shank Flute Shape: Helical Flutes Drill Point Angle: 135° Overall Length : 10″ Size : 11/16″ #ad - Morse taper 3. Flute length 5-3/8″. Bronze oxide finish.

 

Steel Self-Drilling Screw Zinc Plated Finish Wafer Head Star Drive 3 Drill Point 10-16 Thread Size 1-14 Length Pack of 50 #ad

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/4″ Length (Pack of 50)

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/4″ Length (Pack of 50) #ad - Zinc plating resists corrosion and has a reflective appearance. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Steel is often used in applications where strength is the primary consideration.

 

Steel Self-Drilling Screw Black Zinc Plated Finish Hex Washer Head Hex Drive 3 Drill Point 10-16 Thread Size 1 Length Pack of 100 #ad

Steel Self-Drilling Screw, Black Zinc Plated Finish, Hex Washer Head, Hex Drive, #3 Drill Point, #10-16 Thread Size, 1″ Length (Pack of 100)

Steel Self-Drilling Screw, Black Zinc Plated Finish, Hex Washer Head, Hex Drive, #3 Drill Point, #10-16 Thread Size, 1″ Length (Pack of 100) #ad - Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver. Hex washer head has a flange for additional grip with the mating surface. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a black reflective appearance.

 

TTC PRODUCTION 60 Piece Screw Machine Stub Length Twist Drill Sets - Drill Point Angle 135° Split Point Tool Material HSS #ad

TTC PRODUCTION 60 Piece Screw Machine Stub Length Twist Drill Sets – Drill Point Angle: 135° Split Point Tool Material: H.S.S

TTC PRODUCTION 60 Piece Screw Machine Stub Length Twist Drill Sets – Drill Point Angle: 135° Split Point Tool Material: H.S.S #ad - Best suited for drilling steel, cast steel, cast iron, or other alloyed or non-alloyed ferrous materials, they also work well for a variety of non-ferrous and non-metallic materials. For optimal performance and the best tool life, suitable lubricating/cutting oils or the appropriate coolant fluids are recommended. .

 

Zinc Plated Steel Self-Drilling Screw Undercut 82 degrees Flat Head Phillips Drive 2 Drill Point 8-18 Thread Size 34 inches Length Pack of 100 #ad

Zinc Plated Steel Self-Drilling Screw, Undercut 82 degrees Flat Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4 inches Length (Pack of 100)

Zinc Plated Steel Self-Drilling Screw, Undercut 82 degrees Flat Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4 inches Length (Pack of 100) #ad - Flat head style allows fastener to sit flush to the surface. Phillips drive is designed to cam out under too much torque. Create their own threads when driven into material. Zinc plated steel fasteners are suitable where strength and corrosion resistance are primary considerations.

 

Steel Self-Drilling Screw Black Phosphate Finish Modified Truss Head Phillips Drive 3 Drill Point 10-16 Thread Size 34 Length Pack of 50 #ad

Steel Self-Drilling Screw, Black Phosphate Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3/4″ Length (Pack of 50)

Steel Self-Drilling Screw, Black Phosphate Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3/4″ Length (Pack of 50) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Modified truss head is extra wide with a low-profile dome and integral round washer. Black phosphate coating provides corrosion resistance and lubricity. Steel is often used in applications where strength is the primary consideration.

 

Steel Self-Drilling Screw Zinc Plated Finish Modified Truss Head Phillips Drive 2 Drill Point 8-18 Thread Size 1-12 Length Pack of 100 #ad

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/2″ Length (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/2″ Length (Pack of 100) #ad - Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Modified truss head is extra wide with a low-profile dome and integral round washer.

 

Steel Self-Drilling Screw Zinc Plated Finish Wafer Head Star Drive 3 Drill Point 10-16 Thread Size 1-12 Length Pack of 50 #ad

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/2″ Length (Pack of 50)

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/2″ Length (Pack of 50) #ad - Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface.

 

Hilitchi 295 Pieces 8  10  14 Stainless Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point 12 to 2 Size Inside Plastic Box #ad

Hilitchi 295 Pieces #8 / #10 / #14 Stainless Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point (1/2” to 2” Size Inside Plastic Box)

Hilitchi 295 Pieces #8 / #10 / #14 Stainless Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point (1/2” to 2” Size Inside Plastic Box) #ad - High quality 304 stainless steel self-drilling screws kit screw type hex washer head self drilling screws material high quality 304 stainless steel, stainless steel with superior rust resistant ensure long lasting results package quantity 295 pieces set include #8 1/2”——————30 pieces #8 5/8”——————30 pieces #8 3/4”——————30 pieces #8 1/”——————–30 pieces #8 1-1/4”—————-20 pieces #10 1/2”—————–30 pieces #10 5/8”—————–30 pieces #10 3/4”—————–30 pieces #10 1/”——————-30 pieces #10 1-1/4”—————20 pieces #14 1-1/4”—————-5 pieces #14 1-1/2”—————-5 pieces #14 2”———————-5 pieces comes in a handy plastic organizer case with size compartments for easy storage.

 

Steel Self-Drilling Screw With Wings Zinc Plated Finish 82 Degree Flat Head Phillips Drive 4 Drill Point 12-24 Thread Size 2 Length Pack of 50 #ad

Steel Self-Drilling Screw With Wings, Zinc Plated Finish, 82 Degree Flat Head, Phillips Drive, #4 Drill Point, #12-24 Thread Size, 2″ Length (Pack of 50)

Steel Self-Drilling Screw With Wings, Zinc Plated Finish, 82 Degree Flat Head, Phillips Drive, #4 Drill Point, #12-24 Thread Size, 2″ Length (Pack of 50) #ad - Zinc plating resists corrosion and has a reflective appearance. Wings above the drill point enable secure fastening of thick wood to metal. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Steel is often used in applications where strength is the primary consideration.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.