RUBBER-NUT THREADED INSERTS, 8-32 THREAD SIZE, .015-.156 GRIP RANGE (PACK OF 25)
- Blind, install from one side. 8-32 thread size. Dampens vibration & shock / muffles noise. Helps prevent galvanic corrosion / seals out ambient moisture. No installation tools required / easy one-step installation.
Nylon 6/6 Small Pattern Machine Screw Hex Nut, Off-White, #8-32 Thread Size, 11/32″ Width Across Flats, 9/64″ Thick (Pack of 100)
- Ensure a lasting hold for any project. Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads. Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations. Hex nuts are appropriate for use in low-strength assemblies. Drive system is a hexagon-shaped head.
Steel Machine Screw, Zinc Plated Finish, Pan Head, Phillips Drive, Meets ASME B18.6.3/SAE J82, 1/4″ Length, Fully Threaded, #8-32 Threads (Pack of 100)
- Zinc plating resists corrosion resistance and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Meets asme b1863 and sae j82 specifications.
Brass Acorn Nut, Grade 8, Right Hand Threads, #8-32 Threads (Pack of 50)
- Several different nut styles fit a variety of application and installation requirements. . Brass provides corrosion resistance and offers thermal and electrical conductivity. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. The brass acorn nut, also called a cap nut, has a domed top that covers exposed threads on rods, studs, and bolts. The material is nonmagnetic. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. Nut styles such as locknuts and self-locking hex nuts have a locking mechanism that makes them suitable for applications with a high amount of vibration.
18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #8-32 Thread Size, 3/8″ Length (Pack of 50)
- Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating.
Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1-7/8″ Length, Fully Threaded, Imported (Pack of 50)
- Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. .
Nylon 6/6 Pan Head Machine Screw, Black, #2 Phillips Drive, #8-32 Thread Size, 1″ Length, Fully Threaded, USA Made (Pack of 100)
- . They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.
Nylon 6/6 Pan Head Machine Screw, Off-White, #2 Phillips Drive, #8-32 Thread Size, 1-1/4″ Length, Fully Threaded, USA Made (Pack of 100)
- Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. .
Nylon 6/6 Machine Screw, Plain Finish, Black, Binding Head, Combination Phillips Slotted Drive, Meets ASTM D4066/ASTM D6779, 3/4″ Length, Fully Threaded, #8-32 Threads (Pack of 100)
- Meets astm d4066 and d6779 specifications. Combination phillips slotted drive accepts both phillips and standard slotted drivers and is designed to prevent over-tightening. Nylon 6/6 provides resistance to abrasion, corrosion, and many chemicals, is nonconductive, and is a strong yet lightweight plastic. Binding head is a slightly undercut, low-profile head with a round top and short vertical sides.
YG-1 I9 Series Vanadium Alloy HSS Spiral Pointed Tap, Steam Oxide, Round Shank with Square End, Plug Chamfer, #8-32 Thread Size, H3 Tolerance
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Nylon 6/6 Small Pattern Machine Screw Hex Nut, Black, #8-32 Thread Size, 11/32″ Width Across Flats, 9/64″ Thick (Pack of 100)
- Nylon 6/6 can either absorb or lose moisture, which may alter its dimensions and mechanical properties. Nylon 6/6 provides resistance to abrasion, corrosion, and many chemicals and solvents. The material is a strong yet lightweight plastic and is nonconductive. It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. The nut has a small pattern design, meaning it is narrower than a standard machine screw hex nut for use in areas with limited space. The nylon 6/6 small pattern machine screw hex nut has a black color. Some nuts have a self-locking mechanism, such as a nylon patch or distorted threads, that makes them suitable for applications with a high amount of vibration. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. Several different nut styles fit a variety of application and installation requirements.
Steel Thread Cutting Screw, Black Zinc Plated, Truss Head, Phillips Drive, Type F, #8-32 Thread Size, 5/8″ Length (Pack of 50)
- Zinc plating resists corrosion and has a black reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance.
Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 4″ Length, Fully Threaded, Imported (Pack of 10)
- They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.
Nylon 6/6 Pan Head Machine Screw, Off-White, #2 Phillips Drive, #8-32 Thread Size, 1″ Length, Fully Threaded, USA Made (Pack of 100)
- Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Zinc plating resists corrosion and has a black reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance.
Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 3-1/2″ Length, Fully Threaded, Imported (Pack of 10)
- Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Slotted drive has a linear slot for use with a flat-blade driver. Hex washer head has a flange for additional grip with the mating surface. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration.
18-8 Stainless Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1″ Length, Fully Threaded, Imported (Pack of 25)
- Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw.
Steel Truss Head Machine Screw, Zinc Plated Finish, Meets ASME B18.6.3, T15 Star Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, Imported (Pack of 100)
- Plain surface has no. Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Designed to clip onto panels for quick alignment and a secure hold. Steel is often used in applications where strength is the primary consideration.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 3/4″ Length, Fully Threaded, Import (Pack of 100)
- They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)
- They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.
Nylon 6/6 Pan Head Machine Screw, Off-White, #2 Phillips Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, USA Made (Pack of 100)
- Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Plain surface has no. Designed to clip onto panels for quick alignment and a secure hold. Steel is often used in applications where strength is the primary consideration.
Black Oxide Alloy Steel Hex Socket Head Cap Screw, Self Locking, #8-32 Thread Size, 3/4″ Length, Fully Threaded (Pack of 25)
- Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Plain surface has no. Steel is often used in applications where strength is the primary consideration. Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold. Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, T20 Star Drive, #8-32 Thread Size, 1-1/2″ Length, Fully Threaded, Imported (Pack of 50)
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
18-8 Stainless Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 5/8″ Length, Fully Threaded, Imported (Pack of 25)
- Designed to clip onto panels for quick alignment and a secure hold. Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Plain surface has no. Steel is often used in applications where strength is the primary consideration.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
