BLIKA 20 Pairs Hand-Crimp Threaded Terminal Tensioner and Stemball Swage for 1/8″ Cable Railing System, 316 Marine Grade Stainless Steel Cable Railing Kit, for Wood or Metal Posts
- ✅material marine grade t316 stainless steel, corrosion resistance. ✅Size stemball swage overall length of stemball = 162″ head diameter = 25/64″ drill hole size = 1/4″ swage threaded stud overall length 3-7/8″, thread length 1-7/8″, 1/4″, 20, hole to drill=025″. ✅Applications used on metal or wood posts, cable railing kits fit for 1/8” wire rope cable, the stemball swage end holds the cable in place on one end the stemballs and swage threaded stud are good for outdoor or indoor applications. ✅Recommended to use hydraulic crimper tool b07jmr3cdd, cable cutter b07dzvrd75. ✅What you get 20pcs stemball swages + 20pcs swage threaded studs.
Homend 50 Pack 316 Stainless Steel Hand-Crimp Stemball Swages for 1/8″ Cable Railing Marine Grade
- √ top quality t316 marine grade perfect for fitting 1/8″ stainless steel cable to make a dead end. √ Hand-crimp need a hand crimping tool to crimp on the 1/8″cable wire rope. √ Invisible hidden in the post make a clean look for wood post or metal post. √ Package included 50 pcs 316 stainless steel hand-crimp stemball swages. √ Measurements：overall length of stemball is 1-1/2″ head diameter is 25/64″.
10pcs Stainless Steel Threaded Tensioner Stud Ends Threaded Hand Crimp Swage Stud/Swage Tension End Fitting for 1/8″ Cable Railing System
- ✅ suitable for outdoor or indoor use, can be used for wood posts and has an excellent shine to it. ✅ Cable tensioner made of high strength stainless steel, it is durable, sturdy and not easy to rust. ✅ Designed for use with 1/8inch (3175mm) single strand cables, it provides tensioning for your cables. ✅ Comes with threaded stud, washer, hex nut and cap nut for easy and quick installing. ✅ They are typically housed entirely within your end posts, which make a super clean look for your project.
Senmit Stainless Steel Hand-Crimp Stemball Swages for 1/8″ Cable Railing T316 Marine Grade – 50 Pack
- Invisible hidden in the post make a clean look for wood post or metal post. Overall length of stemball = 1-1/2″ head diameter = 25/64″ recommended drill hole diameter = 1/4″. Recommend to use with senmit threaded terminal stud end and senmit cable protector sleeve. High-quality t316 marine grade perfect for fitting 1/8″ stainless steel cable to make a dead end. Hand-crimp need a hand crimping tool to crimp on the 1/8″ cable wire rope.
Stainless Steel Hand Crimp Toggle and Stud Turnbuckle Tensioner for 3/16″ Cable -Cable Railing Fitting – Stud Fitting – Deck Railing – Hand Railing (10Sets)
- Stainless steel t316, toggle & stud turnbuckle tensioner for 3/16″ cable. Package includes 10sets (1set = 1 turnbuckle & 1 end fitting, as pictured). Overall length closed 7-1/8″, length of body 3-3/4″, jaw opening 040″, pin diameter 023″. High quality, marine grade for maximum corrosion resistance. A swage tool is required for crimiping.
Muzata Threaded Hand Crimp Swage Stud and Stemball Swage Combination Pack for 1/8″ Cable Railing Kit System,Tension End Fitting,T316 Marine Grade Stainless Steel 10Pairs CK14,Series CA1 CD1 CS1
- Both terminals and stemballs fitting ends are hidden in the post to keep deck or stair cable railing system prettythe threaded terminal tensions your cable railing with only a few turns of a hex nutthe stemball swage end holds the cable in place on one endperfect for wood steel or aluminum post. You can diy to install a cable railing systemthe stud end could be adjusted to tighten the wire rope so you don’t need to wast money on turnbuckle or tensionerthese swage studs and stemball swage are fit for 1/8″ cable , they are designed for decades using. You could search partnumber to find other muzata cable railing kit accessaries work better with this muzata wr01→1/8 stainless steel cable wire ropemuzata cr09→customized hydraulic crimper super hard mold for steelmuzata cr12→cable cutter up to 5/32″muzata cr13→protector sleevesmuzata cr25→30 degree angle beveled washer. These deck railing hardware require a special hand crimper tool make sure to use muzata customized hand swaging tool for stainless steel 1/8″ fittings(search for muzata cr09) standard crimper tools typically will not put a sufficient crimp on these steel fittings, which could result in cable loosening and slipping out. This cable railing kit includes 10pcs swage threaded studs and 10pcs stemball swages,can create 10 runs 1/8″ cables railingkit made of t316 marine grade stainless steelthey can be used indoor or outdoor wood & metal post,decking railing,stairs railing handrails.
VistaView CableTec Stainless Steel Hand-Crimp Deck Toggle for 1/8″ Cable (for Surface Mounting-Great for Stairs) – Lot of 10
- Marine-style hand crimper tool required for installation available for rental. T316 marine grade stainless steel for maximum durability, strength and weather protection. Typically paired with a deck toggle & stud turnbuckle or threaded terminal on opposite end of cable run. These high-quality stainless steel fittings surface mount a traditional diy cable railing into wood. Overall length of deck toggle (from plate to end of shaft) = 3″, length between center of hole to center of hole on mounting plate = 1-5/16″, overall length of mounting plate = 1-15/16 “.
VistaView CableTec Stainless Steel Hand-Crimp Stemball Swages for 1/8″ Cable Railing for Metal Posts (Low Clearance Head) – Lot of 50
- Affordable, stemball swages are the most economical type of end fitting you could use, while still being 100% functional. High-grade stainless steel, these stemballs are made of t316 marine-grade steel that offers maximum durability in harsh climates. Do it yourself, these high-quality fittings provided a “dead end” for a diy cable railing project. Functional, this fixed end is typically paired with a threaded terminal or turnbuckle on the opposite end of a cable run. Hidden, the stemball swages provide a simple, hidden end to a cable railing with a very small, low clearance head being the only exposed part.
Bestbode Hand-Crimp Stemball Swages Threaded Stud Paired with Cable Tensioner Fixed Ends for 1/8″ Cable Railing,for Wood and Metal Posts,T316 Marine Stainless Steel 10PACK BC10
- Typically paired with a threaded terminal (search for bestbode bc06)or turnbuckle railing kit (search for bestbode bc02) on opposite end of cable run. These high-quality stainless steel stemball swage fittings provide a “dead end” for a traditional diy 1/8 inch cable railing, decking railing,stairs railing handrails,compatible for metal or wood posts. Marine-style hydraulic hand crimper tool required for installationbestbode bc12,cable cutter bestbode bc11. The stemball swage end holds the cable in place on one end,t316 marine grade stainless steel for maximum durability,strength and weather protectionthe stemballs are good for outdoor and indoor applications. Overall length of stemball = 1-1/2″ head diameter = 25/64″ recommended drill hole diameter = 1/4″,compatible for 1/8″ cable railing.
VistaView CableTec Stainless Steel Hand-Crimp Stemball Swages for 3/16″ Cable Railing with Stainless Washers (Lot of 10)
- T316 marine grade stainless steel for maximum durability, strength and weather protection. Typically paired with a threaded terminal or turnbuckle on opposite end of cable run. Overall length = 1-5/8″, head diameter = 7/16″, drill hole size = 5/16″. These high-quality stainless steel fittings provide a “dead end” for a traditional diy cable railing. Marine-style hand crimper tool required for installation available for rental.
VistaView CableTec Stainless Steel DIY Hand-Crimp Threaded Tensioner Ends for 1/8″ Cable Railing (3-3/4″ Long, for Wood Or Metal Posts) – Lot of 10
- All-purpose, these threaded tensioners can be used on all sorts of posts, from 4×4’s down to 2″ pipes. Decorative, terminals are primarily housed within end posts with only the stainless nuts and caps exposed on the outside of the post. Unctional, use on one end or both ends of your strands for maximum tensioning ability. High-grade stainless steel, these terminals are made of t316 marine-grade steel that offers maximum durability in harsh climates. Do it yourself, these fittings are used to properly tension cable strands in a diy cable railing project.
K41 Positioner for Daniels DMC AFM8/WA22 Hand Crimp tool Socket M39029/57-356,57-355,57-354 Crimp Contacts M38999 Series2 22#,22M#,22D#
- Purchasing in other stores will not guarantee these services. Gives a standardized and accurate crimp every time suitable for military connectors,heavy duty connectors,electric connectors,terminals,wiring harness manufacturing industry,cable assembly. Please note cablegial are authorized store on amazon that can sell cablegial brand products. Cablegia specializes in designing and manufacturing hand/ pneumatic indents crimping tools, open frame die crimper, positioners, turret heads for wire crimpers. We make every efforts to provide our customers with tool selection services, product customization services great after-sales services and product maintenance services.
A+Selected 10Pack Lag Screw Hand-Crimp Swage Stud Threaded End Fitting Terminal for 1/8″ Cable Wire Deck Railing,Stainless Steel 316 Marine Grade
- Package 10pack lag screw swage studs at reasonable price get your money’s worth. Material made of t316 marine grade stainless steel, high tensile strength, anti-fatigue strength and weather protection. Applications the cable railing hardware is perfect for diy your own cable railing project, suitable for indoor or outdoor applications, such as deck railing, cable handrails, cable wire fence. The swage lag screw is perfect for 1/8″ wire rope cable and swage. Size overall length 3-15/16″, thread length 2″, thread diameter 1/4″, pilot hole size 1/8″.
100 Pack Fayevorite Stainless Steel Hand-Crimp Stemball Swages for 1/8″ Cable Railing, Cable Dead End, T316 Marine Grade (100)
- Amazon. Fayevorite cable railing fittings – stemball swages for 1/8″ cable railing this stemball swage is for 1/8″ wire rope. 29 oz/ 8g head diameter 25/64″ overall length 1/2″ hole to drill 1/4″ quantity 100 pcs highly recommend to use with fayevorite threaded terminal stud ends 1/8″ and protector sleeves. Can select 20 pack, 50 pack and 100 pack. Model number st01 material t316 stainless steel, marine grade suitable wire 1/8″ unit weight 0. If you required protector sleeves, please visit https//www. It is requires hand or machine hydraulic swaging. Com/dp/b07t3zj9pj. If you required threaded terminal stud ends, please search “b07mydcq2k”. It commonly used as a dead end and works with threaded terminal stud ends or turnbuckles for tensioning wire rope. It is made with high quality t316 marine grade stainless steel.
VistaView CableTec Stainless Steel DIY Hand-Crimp Threaded Tensioner Ends for 3/16″ Cable Railing (4-1/4″ Long, for Wood Or Metal Posts) – Lot of 10
- Unctional, use on one end or both ends of your strands for maximum tensioning ability. High-grade stainless steel, these terminals are made of t316 marine-grade steel that offers maximum durability in harsh climates. All-purpose, these threaded tensioners can be used on all sorts of posts, from 4×4’s down to 2″ pipes. Decorative, terminals are primarily housed within end posts with only the stainless nuts and caps exposed on the outside of the post. Do it yourself, these fittings are used to properly tension cable strands in a diy cable railing project.
VistaView CableTec Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8″ Cables
- 1-cavity crimper, this 14-inch tool has one cavity options that crimps 1/8-inch fittings. Do-it-yourself, the vistaview hand crimper allows you to do it yourself without hiring anyone to fix your railings for you. Designed for steel fittings, this tool is perfect for crimping the stainless steel fittings of cable railings and boat rigging. Durable tool, this hand crimper is made of quality materials that can handle the sturdiness of stainless steel cables. Easy to use, the tool is the smallest hand-crimper on the market, making it simple to use efficiently.
50 Pcs Hand Swage Tensioner Set Kit T316 Stainless Steel Hand-Crimp Lag and Stud Turnbuckle Tensioner W/Lag Screw for 1/8″ Cable Railing
- ✥Easy to installthese hand swage tensioner can be installed at any angle,perfect for cable railing along stairs or odd-shaped perimeters. ✥Usage these high-quality stainless steel fittings surface mount a traditional diy cable railing into metal, wood, plastic or composite posts. ✥applicationthese t316 stainless steel cable railing hardware are perfect for planning your own cable railing project, good for indoor or outdoor exterior decks, marine rigging, or interior applications. ✥Material stainless steel t316 marine grade,high tensile strength and anti-fatigue strength weatherproof. ✥ Compatibility these lag screw swage turnbuckles used to mount the 1/8″ wire rope cable in the wooden balusters.
UGarden Custom Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8″ to 3/16″ Cable -Wire Swaging Tool-10 Ton and Stainless Steel Cable Cutter
- What you get includes die positioning pin, seal rings, strong protective carrying case, cable cutter and pair of work gloves. Size hydraulic hand crimper tool lengthapprox310mm, weightapproxnw175kg gw3kg cable cutter 81 x 28 x 14 inches, weight112 ounces. Easy to use on/off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire the c-style head makes side entry easier to change the dies. Compatibility crimps 12 awg to 2/0 awg size copper and aluminum wires maximum crimping power10 tons stroke 12mm the hydraulic crimper is suitable for power wires, electrical cables, battery cables and welding cables cable cutter cuts up to 5/32″ stainless steel cable. Material made of durable materials with high strength and good toughness dies are made of hardened steel with chrome finishvinyl-dipped grip for comfort and easy control cable cutter using sk5 high carbon steel seiko forging, durable.
TE CONNECTIVITY/AMP 49935 Tools, Hand Crimp
- Muzata is manufacture directly we provide full solution to commit all your need and only offer the highest quality and most affordable cable railing hardware for your deck and balustrade railing projectplease search for these partnumbers to work better with this 1/8 stainless steel cable(muzata wr01)customized hydraulic crimper (muzata cr09),cable cutter(muzata cr12)protector sleeves(muzata cr13)30 degree angle beveled washer(muzata cr25). These t316 marine grade fittings provided a “dead end” for a diy1/8″ stainless steel cable railing project. This fixed end is typically paired with a threaded terminal or turnbuckle on the opposite end of a cable run recommend to use with muzata threaded terminal stud end (search for muzata cr23) and cable protector sleeve(search for muzata cr13). Price for eachorder unit each 1 svhc no svhc (16-jun-2014). Hand crimp need a hand crimping tool to crimp on the 1/8″ cable wire rope,recommend to search muzata ct1 to purchase muzata custom hand crimper swage tool.
Muzata Threaded Hand Crimp Swage Stud and Stemball Swage Pack for 1/8″ Cable Railing Kit System,Tension End Fitting,T316 Marine Grade Stainless Steel 20Pairs CK14,Series CA1 CD1 CS1 CD2 CS2
- These deck railing hardware require a special hand crimper tool make sure to use muzata customized hand swaging tool for stainless steel 1/8″ fittings(search for muzata cr09) standard crimper tools typically will not put a sufficient crimp on these steel fittings, which could result in cable loosening and slipping out. You could search for these partnumbers which are paired muzata cable railing kit accessories to work better with this 1/8 stainless steel cable wire rope (muzata wr01)customized hydraulic crimper (muzata cr09),cable cutter(muzata cr12)protector sleeves(muzata cr13)30 degree angle beveled washer(muzata cr25), stemball swage(muzata cr24). This cable railing kit includes 20pcs swage threaded studs and 20pcs stemball swages,can create 20 runs 1/8″ railing cablekit made of t316 marine grade stainless steelthey can be used indoor or outdoor wood & metal post,decking railing,stairs railing handrails. Overall length =413″, thread length =133″, pilot hole size = 1/8″for all cable railing fitting series — search muzata ca1 for stair angled railing series — search muzata cs1 for cable railing tool series — search muzata ct1 for cable railing wire rope series — search muzata wp1 . Both terminals and stemballs fitting ends are hidden in the post to keep deck or stair cable railing system prettythe threaded terminal tensions your cable railing with only a few turns of a hex nutthe stemball swage end holds the cable in place on one endperfect for wood steel or aluminum post.
Molex Crimpers/Hand Crimp Tool, 24-18 awg 63819-0901
- Molex crimpers / hand crimp tool, 24-18 awg use with part(s) mini-fit jr. Male and female crimp terminals, 16-24 awg.
MOLEX 63819-0900 HAND CRIMP TOOL
- ✅ Comes with threaded stud, washer, hex nut and cap nut for easy and quick installing. ✅ They are typically housed entirely within your end posts, which make a super clean look for your project. Price for eachorder unit each 1 svhc to be advised. ✅ Designed for use with 1/8inch (3175mm) single strand cables, it provides tensioning for your cables. ✅ cable tensioner made of high strength stainless steel, it is durable, sturdy and not easy to rust.
MUZATA Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/16″,5/64″,3/32″,7/64″,1/8″ Cables CR11
- It works on single loops and double clips, great swaging the cable railing fittings for cable railings and boat rigging recommended for 1/8″ muzata hand-crimp fittings, please search b01l73unkk to find them. The swaging tool can crimp multiple sizes ferrules including 1/16″,5/64″,3/32″,7/64″,1/8″ for use on the paired cable you also can use the 1/8 for 5/32, there is at least that much effort in the crimp that it should work just fine these sizes refer to the diameter of the cable and the inside diameter the sleeve. It is good for crimping aluminum and copper ferrules and stops only steel and stainless steel fittings require heavier swagers. Good precision ferrules and stops fit exactly heavy duty and very sturdy ,well built will last for years. This tool is for swaging only, it is made for swaging (crimping) aluminum or copper ferrules it has no cutting ability for any kind of cable if you need something to cut cable, please search b06xcx2ll7 to find the cable cutter.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
