24 Most Wanted Pipe Vises

 

Ridgid 40220 Straight Pipe Welding Vise - Capacity 1/2-inch to 8-inch. This item is 40220 vise, 461 straight welding. Made of durable performance-proven material and designed to resist strain, heat and warpage during tacking. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. This product is used for pin-vises. Model #461. This product manufacture by united states. Machined swivel nuts and pins, together with special chain screws, give smooth and trouble-free assembling of the vise onto pipe.

 

Yost High-Visibility All Steel Utility Combination Pipe and Bench Vise – 4in. Jaw Width, Model# 14904 - The entire vise is constructed using structural cast steel. ) 4, pipe jaw yes, replaceable jaw yes, jaw depth (in. Equipped with replaceable hardened steel serrated jaws and built-in pipe jaws. 360deg swivel base yes, jaw capacity (in. Vise is painted safety yellow to alert of potential pinch points. ) 4. 144, safety color standards. The yost high-visibility all steel utility combination pipe and bench vise conforms to osha specification #1910. High-visibility all steel vise is economically priced for various less demanding applications. The 360deg swivel base features two 2 lockdowns. The bar covers the continuous rolled main screw. ) 2 1/4, double lock-downs yes, jaw width (in.

 

Steel Dragon Tools 41020 Vise Jaw Set fits RIDGID 460 TRISTAND Pipe Vise - Steel dragon tools® 41020 vise jaw set fits ridgid® 460 tristand® pipe visefits ridgid® 460 72037also fits ridgid® 450 and sdt 460make of sharp forged steel for long lifereplaces ridgid® part 41020.

 

Palmgren 9629748 Combination Bench and Pipe Vise, 8″ Jaw Width x 8-1/4″ Jaw Opening - A precision fit of the slide bar eliminates side play and jaw wobble even when clamping with the jaws wide open. These vises have the throat depth to meet the toughest job requirements and come with both hardened and replaceable steel serrated jaws and pipe jaws. A 360 degree swivel base with dual lock downs and 4 point mounting holes deliver secure, safe clamping. These vises can be used in indoor and outdoor applications. The body is heavier and made of 65,000 psi ductile alloy stress parts. 003″ large anvil 360 degree swivel base with dual lock downs. Palmgren combination bench and pipe vise houses a super strong power tunnel with straight-line pull that assures a lifetime spindle and nut never to wear out. Sealed construction straight line pull power tunnel design precision fit slide bar to 0. It is ideal for maintenance applications, tool and die shops, fabrication shops, automotive garages, tradesmen and construction sites. Specifications model p748 jaw width 8″ jaw opening 8- 1/4″ throat depth 4- 3/4″ pipe jaw capacities 1/4, 3-1/2″. Reinforced large anvils are designed to handle additional non-clamping applications. The vise spindle and nut are totally enclosed in a square tube casting that protects them from dust, chips and moisture, keeping them lubricated for life. They’re practically indestructible and are 70% stronger than the competitive u-shaped styles.

 

41020 Vise Jaw set Fits RIDGID ® E1230 450 460 TRISTAND ® Pipe Vise - Reliable vendor of parts for your ridgid tri stand. Pt® replaces ridgid® part 41020 e1230 fits ridgid 460 and 450. After-market parts for your rigid stand. The alternative to buying a brand new ridgid tristand. Also fits ridgid bc410 bench vise fix your ridgid vise.

 

Palmgren Comb. Bench & pipe vise, 5″ - With palmgren’s 11255 you can solve all angle problems, dispense with clamps or wedges, and get a quick, accurate and positive set-up in a few seconds on your drill press, milling machine or grinder. Vise is equipped with one plain jaw and one horizontally/vertically grooved jaw plate for holding round pieces. Can also be used like an ordinary vise when lowered to the horizontal position. This palmgren vise is built for rugged service. Made of finest materials, and accurately machined to secure quick set-ups for precision work at any desired angle up to 90.

 

40915 Tristand Legs and Tray Fits RIDGID 460 Pipe Vise B2700X - And is used for product identification purposes only. Ridgid® is a trademark of ridgid, inc. Pt is not affiliated with ridgid, inc. 40915 tristand legs and tray fits ridgid 460 pipe vise b2700x.

 

Clamps & Vises HANDHELD CLAMP ON PIPE VISE # 1 HINGED TYPE PLUMBING TOOLS - Meets fed spec ggg-v-410b type vi class 2 specifications and is made in usa. Jaws are grooved for enhanced grip and can be replaced when worn. Ductile iron body is durable and strong for extended life. Clamps & vises handheld clamp on pipe vise # 1 hinged type plumbing tools#0093/42. Bench-mount machinist vise with swivel base, 3″ nominal jaw width, and extra-large jaw opening and throat depth provides clamping action for heavy-duty applications.

 

Superior Tool 2816 Heavy Duty Pipe Vise - Base has built-in pipe support. . Yoke hook grips to form tight lock. Superior tool 2816.

 

Steel Dragon Tools 41065 Chain Link Screw for RIDGID 460 TRISTAND Pipe Vise - Steel dragon tools® 41065 chain link screw for ridgid® 460 tristand® pipe viseincludes chain link screw for ridgid® vise 460 & 450replaces ridgid® part 41065.

 

HFS PIPE VISE 2″ - Designed for cutting and threading pipes. Yoke is made of self-locking hinge construction. Handle any size pipe from 1/8th” up to 3″. Fire-engine red paint. This hinged pipe vise can handle any size pipe from 1/8th” up to 3″ painted in a bright fire-engine red so you cant “lose it” in your shop the locking hinge makes it easy to insert and remove long pipes without the need to feed through through the wide.

 

Wheeler Rex Floor Model Pipe Vises: Capacity: 3/4″ – 20″ (18 – 500mm) - Floor model pipe vises capacity 3/4″, 20″ (18, 500mm). All models have a maximum 2000 lb (900kg) capacity. Quickreleasing chain provides positive gripping power evenly around the pipe and prevents damage. Adjustments are fast to accommodate different pipe sizes 850 shown collapsed. Pipe vises are designed to be portable and quickly assembled for field use, yet strong and tough.

 

Reed Tool 64 Yoke Pipe Vise, 1/4 to 6-Inch - Only reed makes yoke vises in 8″ and 12″ capacities. Built to meet the demands of pipe fitting and threading operations. Yoke and base made of strong, dependable iron. Four points of contact for the jaws to grip the pipe. Solidly built, and provide a powerful grip.

 

Ridgid 40130 Portable Tristand Yoke Pipe Vise - Model 40-a. Complete with slots for hanging tools, pipe rest, three-pipe benders and ceiling brace screw. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. This product is used for pipe-cutters. Large vise base overhangs front legs for clear tool swing. Integral legs and tray fold in for easy carrying and setup. This item is 40130 vise, 40a tristand yoke. This product manufacture by united states.

 

RIDGID 36273 Model 460-6 Portable TRISTAND Chain Vise, 1/8-inch to 6-inch Pipe Vise - Features a convenient lug to clamp the weld ground. Large vise base overhangs the front legs for a clear tool swing. Chain pipe vise has a 1/8-inch to 6-inch (3 mm to 150 mm) pipe capacity. Rugged leg chain and durable tool tray withstand tough jobsite demands. Designed with an optimized base layout to maximize the working area.

 

Wilton Columbian Combination Pipe & Bench Vises – 204-1/2-m3 combination machinist & pipe vise - -Swivel base rotates 360º and gear lock bolt ensures positive locking against slippage. 825-10404 features -hardened steel jaw faces have deep knurled pattern which ensures strength and longevity. -pipe jaws are interchangeable and reversible, they do not protrude beyond the jaw faces, so other work can be held without removing pipe jaws. Dimensions overall product weight -61 pounds. Product type -clamps/vises. -Base type swivel.

 

RIDGID 450 Portable TRISTAND Chain Pipe Vise 1/8-5″ Capacity 40222 (Certified Refurbished) - Large vise base overhangs front legs for clear tool swingslots for hanging tools, pipe rest, three-pipe benders, and ceiling brace screwmodel 450 features a larger work surface with capacity 1/8″, 5″. Integral legs and tray fold in for easy carrying and setup. Each item is then checked for quality and tested. Sdt reconditioned ridgid ® 450 portable tristand ® chain pipe vise 1/8-5″ capacity 40222our reconditioned ridgid® 40222 450 portable tristand® chain vise are gone through with a fine tooth comb, taken apart, degreased, cleaned, sandblasted, painted, and reassembled.

 

Reed Tool FPV20 Field Pipe Vise for 20-Inch Pipe - Designed for heavy duty, pre-trench or field work. Use with reed hinged cutters, rotary cutters and the universal pipe cutter. Legs and backbone for this vise are available. Perfect for supporting work during cutting operations. To create legs, use 1-1/2″ sch 40 steel pipe.

 

Ridgid 40225 Angle Pipe Welding Vise - Made of durable performance-proven material and designed to resist strain, heat and warpage during tacking. Capacity 2-1/2-inch to 8-inch. Model #463. This product is used for pin-vises. Machined swivel nuts and pins, together with special chain screws, give smooth and trouble-free assembling of the vise onto pipe. This product manufacture by united states. This item is 40225 vise, 462 angle welding. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

 

RIDGID 36278 Model 460-12 Portable TRISTAND Chain Vise, 1/8-inch to 12-inch Pipe Vise - An adjustable rear leg provides stability and allows you to level the pipe. Designed with an optimized base layout to maximize the working area. Chain pipe vise has a 1/8-inch to 12-inch (3 mm to 300 mm) pipe capacity. Rugged leg chain and durable tool tray withstand tough jobsite demands. Features a convenient lug to clamp the weld ground.

 

Locking Chain Clamp Oil Filter Remover Pipe Vise Clamp 19″ Chain Pulley Holder - Ratchet action and can hold and lock around any shape. Locking chain clamp oil filter remover pipe vise clamp 19″,chain pulley holder 8-1/2″ locking wrench with 19″”. A mechanism to resist slipping adjusts quickly to a. Chain high quality locking chain secures by locking.

 

Greenlee 467 Chain, Type Pipe Vise - Holds 1/8-inch to 5-inch pipe. Built-in pipe rest. Use with a wide range of sizes of pipe or conduit. Chain design holds pipe securely to prevent it from twisting or turning during threading. To prevent marring of plastic or plastic coated pipe, vise jaws can be rotated with smooth side up.

 

HFS (Tm) PIPE VISE 3″ CAPACITY - Painted in a bright fire-engine red so you cant “lose it” in your shop. . The wide threads on the lock-down screw provide plenty of torque to hold the pipe in place whether you’re cutting or threading. 5″. Hfs also offers affordable pipe threading machines to match this vise. This hinged pipe vise can handle any size pipe from 1/2 ” up to 4. The locking hinge makes it easy to insert and remove long pipes without the need to feed through through.

 

Clamps & Vises Pipe Threader Ratchet Type with 5 dies + Pipe Cutter # 2 + Clamp on Pipe Vise #1 - Clamps & vises pipe threader ratchet type with 5 dies + pipe cutter # 2 + clamp on pipe vise #1 #0093/44. Ductile iron body provides strength for extended life, and acts as an anvil and an additional work surface. 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place. Pipe jaws adjust horizontally and vertically, are set back to prevent interference with top jaw use, and can be replaced when worn. Bench-mount vise with swivel base, 55″ nominal top jaw width, and 0125″- to 25″-diameter pipe capacity provides clamping action for medium-duty applications.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.