24 Top Drill & Taps for 2019

 

ALUMALOY 1 lb Pound Aluminum REPAIR Rods No Welding Fix Cracks Drill Tap Polish or Paint #ad

ALUMALOY 1 lb Pound: Aluminum REPAIR Rods No Welding Fix Cracks Drill Tap Polish or Paint

ALUMALOY 1 lb Pound: Aluminum REPAIR Rods No Welding Fix Cracks Drill Tap Polish or Paint #ad - Priority shippingwatch alumaloy in action on youtube key word alumaloy. Alumaloy melts at close to 728 ° f whereas aluminum melts at near 1220 ° f. Tensile strength 39,000 psi, compression strength 60,000 to 75,000 psi. The benefit of alumaloy is the 500 ° differential in melting temperature requirements. Alumaloy as seen on tv is an easy to use, fluxless & arcless aluminum repair rod.

 

Greenlee DTAPM6C Combination Drill and Tap Bit M6 #ad

Greenlee DTAPM6C Combination Drill and Tap Bit, M6

Greenlee DTAPM6C Combination Drill and Tap Bit, M6 #ad - Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs carbon steel for longer life. Designed to tap up to 10-gauge metal. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time.

 

Inton M2 Material 6pcs HSS 14 Inch Hex Metric Deburr Countersink Titanium Coated Combination Drill Tap Bit Set M3-M10 6pc titanium #ad

Inton M2 Material 6pcs HSS 1/4 Inch Hex Metric Deburr Countersink Titanium Coated Combination Drill Tap Bit Set M3-M10 (6pc titanium)

Inton M2 Material 6pcs HSS 1/4 Inch Hex Metric Deburr Countersink Titanium Coated Combination Drill Tap Bit Set M3-M10 (6pc titanium) #ad - Package included 1x set (6pcs) hex shank tap drill bits. Titanium coated, rust-proof. Hss6542 (m2) is of higher hardness and more durable than the hss4341, and is suitable for cutting the steel even the 2mm 304 steel. Uses high speed steel 6542 material, higher hardness, more durable,can be used for drilling the steel plate even the 2mm 304 steel plate. Self-centering point, do not need assistant center drilling or center punching. Applicable to some types of carbon steel and ordinary steel, copper and aluminum magnesium alloy drilling hole. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc. Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency. The advantage is opening, tapping, chamfering. Welcome to inton store features high hardness, rustproof, solid and durable.

 

Greenlee DTAP38-16 Combination Drill and Tap Bit 38-16NC #ad

Greenlee DTAP3/8-16 Combination Drill and Tap Bit, 3/8-16NC

Greenlee DTAP3/8-16 Combination Drill and Tap Bit, 3/8-16NC #ad - Made from hardened high-speed steel vs carbon steel for longer life. Designed to tap up to 10-gauge metal. Back tapered beyond tap to prevent thread damage from over-drilling. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time. Deburr/countersink also provided on bit beyond back taper.

 

DEWALT DWADTQTR5SET Impact Ready 5-Piece Drill Tap Set 14 Capacity #ad

DEWALT DWADTQTR5SET Impact Ready 5-Piece Drill Tap Set, 1/4″ Capacity

DEWALT DWADTQTR5SET Impact Ready 5-Piece Drill Tap Set, 1/4″ Capacity #ad - This item allows you to drill, tap, and countersink all in one step capable of working with up to 1/4″ thick material capacity. Includes (1) 8-32 unc, (1) 10-24 unc, (1) 10-32 unf, (1) 12-24 unc, (1) 1/4″-20 unc. Dewalt dwadtqtr5set impact ready® 5pc drill tap set 1/4″ capacity features a 1/4″ hex shank for use in impact drivers. Commonly used by elevator installers, mechanicals, electricians, glaziers.

 

Inton Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 14-20nc Set of 6 #ad

Inton Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6

Inton Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 #ad - Multicoated optics guarantee superior light transmission and brightnessideal for auto repair and machinery where metric threads are specified,suitable for soft tapping met. Total length 58mm (approx),shank 1/4″ (635mm) hex shank. Thread (inch) 6-32nc (35mm), 8-32nc( 42mm), 10-32nc( 5mm), 10-24nc ( 5mm), 12-24nc( 57mm), 1/4-2. Material high speed steel,quantity1 set (6 pcs). Bigest discount & insure high quality.

 

Champion DT22HEX-SET10 Combination Drill and Tap Set 10-Piece #ad

Champion DT22HEX-SET10 Combination Drill and Tap Set, 10-Piece

Champion DT22HEX-SET10 Combination Drill and Tap Set, 10-Piece #ad - Tapered neck design significantly reduces drill & tap breakage. Contents include 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13. Applications include construction, electrical, maintenance, industrial, automotive, farm implement machinery, hvac cuts steel, cast iron, aluminum, bronze, brass, zinc and some stainless steel. Superior strength durability provided by high molybdenum content and high speed steel with functional black and gold surface treatment that holds lubricant for smoother drilling. The 135 degree split point drill permits holes to be cut at high speeds taping caution must be adhered to with slower speed.

 

DrillTap Bits - drilltap 516-18 pop #ad

Drill/Tap Bits – drill/tap 5/16-18 (pop)

Drill/Tap Bits – drill/tap 5/16-18 (pop) #ad - 15 pounds. -Deburr/countersink also provided on bit beyond the back taper. -Drill point, split point with web thinning. . Dimensions overall product weight -0. 332-dtap5/16-18 features -complete hole drilling and taping in one operation. -Applicable materials aluminum, brass, copper, mild steel. Number of bits -1.

 

DEWALT DWADT3816 16 UNC Drill Tap 38 #ad

DEWALT DWADT3816 16 UNC Drill Tap, 3/8″

DEWALT DWADT3816 16 UNC Drill Tap, 3/8″ #ad - . The dewalt dwadt3816 3/8″ 16 unc drill tap is designed to be used with impact drivers. It allows you to drill and tap holes in one application, and also deburr and countersink in one step. It offers a speed tip which penetrates material quickly, along with a hex shank for use in impact drivers.

 

Atoplee 6 pieces Combination Drill and Tap Bit 6-32NC - 14-20NC #ad

Atoplee 6 pieces Combination Drill and Tap Bit, 6-32NC – 1/4-20NC

Atoplee 6 pieces Combination Drill and Tap Bit, 6-32NC – 1/4-20NC #ad - Hex shank hss drill bit & screw tap of imperial unit. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel for longer life. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time.

 

GORCHEN Drill Tap Bit Combination Tool Kit Set Hex Shank Titanium Metric Deburr Countersink Bit HSS M3-M10 #ad

GORCHEN Drill Tap Bit Combination Tool Kit Set Hex Shank Titanium Metric Deburr Countersink Bit HSS M3-M10

GORCHEN Drill Tap Bit Combination Tool Kit Set Hex Shank Titanium Metric Deburr Countersink Bit HSS M3-M10 #ad - Package one plastic storage case with 6 drill tap bits inside. Feature drill, tap and deburr/countersink in one operation, save time and efficient. Material hardened high speed steel 6542 with titanium coated, ensures durable sharp. Size m3 x 05, m4 x 07, m5 x 08, m6 x 1, m8 x 125, m10 x 15. Suitable for drilling and tapping in wood, plastic and soft metal like aluminum, copper, etc.

 

Huot Tap and Drill Bit Index for Metric Tap Sizes 25 mm x 045 mm to 12 mm x 175 mm and Metric Drill Bit Sizes 205 mm to 102 mm #ad

Huot Tap and Drill Bit Index for Metric Tap Sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and Metric Drill Bit Sizes 2.05 mm to 10.2 mm

Huot Tap and Drill Bit Index for Metric Tap Sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and Metric Drill Bit Sizes 2.05 mm to 10.2 mm #ad - Meets iso 529 1975 standards. Made in usa. Index holds 18 taps and drill bits in metric tap sizes 25 mm x 045 mm to 12 mm x 175 mm and drill bit sizes 205 mm to 102 mm. Made of steel with an epoxy finish and has a snap-lock cover for durability and protection. Labeled storage holes for identification and organization.

 

DEWALT DWADT832 UNC Drill Tap 8-32 #ad

DEWALT DWADT832 UNC Drill Tap, 8″-32″

DEWALT DWADT832 UNC Drill Tap, 8″-32″ #ad - It offers a speed tip which penetrates material quickly, along with a hex shank for use in impact drivers. It allows you to drill and tap holes in one application, and also deburr and countersink in one step. The dewalt dwadt832 8-32 unc drill tap is designed to be used with impact drivers.

 

Yosoo 6pcs SAE Drill Tap Combination Bit Set Deburr Countersink Hex Bit HSS 14 Shank #ad

Yosoo 6pcs SAE Drill Tap Combination Bit Set Deburr Countersink Hex Bit HSS 1/4 Shank

Yosoo 6pcs SAE Drill Tap Combination Bit Set Deburr Countersink Hex Bit HSS 1/4 Shank #ad - Suitable for soft metal tapping, such as aluminum plate, thickness of less than 3–4mm. Size sae size6-32nc (35mm), 8-32nc( 42mm),10-32nc( 5mm),10-24nc ( 5mm),12-24nc( 57mm),1/4-20nc( 635mm) shank dia635mm 1/4 hex shank. Use for hole punching,tapping,chamfering. Combination drill and tap bit. Material high speed steel.

 

Drillpro 6pcs Combination 14 Hex Twist Tap Drill HSS M3-M10 Bit Screw Countersink BI112 #ad

Drillpro 6pcs Combination 1/4” Hex Twist Tap Drill HSS M3-M10 Bit Screw Countersink BI112

Drillpro 6pcs Combination 1/4” Hex Twist Tap Drill HSS M3-M10 Bit Screw Countersink BI112 #ad - Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc. Shank dia 62mm 1/4 hex shank. Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency. Material high speed steel. Fast replacement composite cone, uses drill edged principle.

 

Irwin Tools 80185 Tap HCS and Drill Bit Sets HSS 13-Pieces #ad

Irwin Tools 80185 Tap (HCS) and Drill Bit Sets (HSS), 13-Pieces

Irwin Tools 80185 Tap (HCS) and Drill Bit Sets (HSS), 13-Pieces #ad - 135° split-point drill bits give fast, precise drilling. 135-degree split point hss drill bits ensure fast, precise drilling. High carbon steel plug taps are ideal for general purpose threading. Includes a plastic storage case. Includes plastic storage case. High-carbon steel plug taps are great for general-purpose threading. These drill and tap combinations produce a thread that is strong and easy to tap. This tap and drill bit set produces a thread that is strong and easy to tap. Set pieces 6, 32 nc, 8, 32 nc, 10, 24 nc, 10, 32 nf, 12, 24 nc and 1/4″, 20 nc plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a t-handle tap wrench.

 

 10 X 12 Hex Head Drill Tap Screws Box of 100 #ad

# 10 X 1/2″ Hex Head Drill & Tap Screws (Box of 100)

# 10 X 1/2″ Hex Head Drill & Tap Screws (Box of 100) #ad - 7/64, 11/64). Head of screw will sit on surface. Thickness of material to be joined should fall within this range. 110, 0. Quantity 100material zinc plated tempered steeldiameter # 10 (0. General use to attach metal to metal without predrilling or attach wood (up to 1/2″) to metal without predrilling. 198″)length 1/2″drive 5/16″ hexa power drill must be used to install and a magnetic nutsetter for hex tip is recommended. Min-max 0. 175 (approx.

 

Greenlee DTAPKITM M3-M10 6-Piece Combination Drill and Tap Set #ad

Greenlee DTAPKITM M3-M10 6-Piece Combination Drill and Tap Set

Greenlee DTAPKITM M3-M10 6-Piece Combination Drill and Tap Set #ad - Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs carbon steel for longer life. Back tapered beyond tap to prevent thread damage from over-drilling. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time. Designed to tap up to 10-gauge metal.

 

IRWIN HANSON 8 - 32 NC Tap and No 29 Drill Bit Set 80217 #ad

IRWIN HANSON 8 – 32 NC Tap and No. 29 Drill Bit Set, 80217

IRWIN HANSON 8 – 32 NC Tap and No. 29 Drill Bit Set, 80217 #ad - Includes 1 drill bit and 1 tap. Creates 32 threads per inch. Drill bit constructed of high speed steel for fast and precise drilling. Tap crafted of high carbon steel for general purpose drilling. Ideal for creating and threading fasteners holes in metal.

 

Klein Tools 32242 14-20 Drill Tap #ad

Klein Tools 32242 1/4-20 Drill Tap

Klein Tools 32242 1/4-20 Drill Tap #ad - Sold alone or as part of a kit (32217). . Drill, tap and deburr in one easy step. 1/4″ hex for easy quick-connect application.

 

Weaver Drill and Tap Set 648-32 #ad

Weaver Drill and Tap Set 6/48-32

Weaver Drill and Tap Set 6/48-32 #ad - Diameter, thread 10-32nf, capacity 10 gauge (35mm), ivy classic time-saver tool. Design allows for drilling, tapping, deburring and countersinking in steel, copper, brass, aluminum and plastic. Weaver we drill & tap set 6/48-32 correct size tap drill for popular sizes of. Tapered design beyond tap prevents thread damage from excess drilling. Constructed out of hardened and tempered m2 high speed steel for long life, premium swift bore (registered trademark).

 

High Carbon Steel Tap and HSS Drill Bit Sets - set drill tap hanson #ad

High Carbon Steel Tap and HSS Drill Bit Sets – set drill & tap hanson

High Carbon Steel Tap and HSS Drill Bit Sets – set drill & tap hanson #ad - Tap type, plug. Quantity, 13 per set. Includes, taps, tr-1e t-handle tap wrench, plastic case. Material, high carbon steel. Thread, tpi or pitch, 6, 32 nc, 8, 32 nc, 10, 24 nc, 10, 32 nf, 12, 24 nc, 1/4 in, 20 nc.

 

IVY Classic 06005 10-32NF Combo DrillTap Bit M2 High Speed Steel 1Card #ad

IVY Classic 06005 10-32NF Combo Drill/Tap Bit, M2 High Speed Steel, 1/Card

IVY Classic 06005 10-32NF Combo Drill/Tap Bit, M2 High Speed Steel, 1/Card #ad - 135-degree split point for accurate self centering, drills exact size hole for tapping. Design allows for drilling, tapping, deburring and countersinking in steel, copper, brass, aluminum and plastic. Constructed out of hardened and tempered m2 high speed steel for long life, premium swift bore (registered trademark). Diameter, thread 10-32nf, capacity 10 gauge (35mm), ivy classic time-saver tool. Tapered design beyond tap prevents thread damage from excess drilling.

 

Du-Bro 360 2-56 Tap And Drill Set #ad

Du-Bro 360 2-56 Tap And Drill Set

Du-Bro 360 2-56 Tap And Drill Set #ad - . During that time, the company has grown from a single product, to 4 companies in three industries, offering more than 1,200 items. Since 1959, the broberg family has owned and operated du-bro products, inc. Innovation and reliability has been synonymous with du-bro for all these years and coupling that with great customer service and a knowledgeable, helpful staff, has made du-bro a staple line in all the industries they have taken on.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.