Kett Tool 70-20 Shear Head
- . Description scissor shear head top stationary blade, used on kd-270, p-570, p-1070 and discontinued k-170 and k-270 shears.
Kett Tool Saw Blade: 2″ (157-56Z) 12 pack
- Number of teeth 60 tpi 0. 1 bore 7/16 maximum depth of cut 3/8 blade cuts the following materials plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte.
Kett Tool KC60-28 Cap Screw
- Item weight, 001 lbs. Excellent quality. Great gift idea. Satisfaction ensured. Package quantity 1.
Kett Tool Saw Blade: 1-1/2″ (157-24Z) 12 pack
- 07 bore 1/4 maximum depth of cut 3/16 blade cuts the following materials plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte. Number of teeth 44 tpi 0.
Kett Tool Saw Blade: 3-1/2″ (157-810) 12 pack
- 09 bore 7/16 maximum depth of cut 1-1/16 blade cuts the following materials hard aluminum fiberglass alliance wall, color wall, mirawal and similar single faced metal laminated panels plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte. Number of teeth 100 tpi 0.
Kett Tool Saw Blade: 2″ (157-52) 12 pack
- Number of teeth 22 tpi 0. 29 bore 7/16 maximum depth of cut 3/8 blade cuts the following materials plywood, hardboard, pressed board, etc.
Kett Tool Saw Blade: 3-1/2″ (157-813) 12 pack
- Number of teeth 136 tpi 0. 07 bore 7/16 maximum depth of cut 1-1/16 blade cuts the following materials mild steel 24 gauge and lighter.
Kett Tool KS-426 Variable Panel and Cable Electric Saw, Cast Aluminum Saw Head, 1/4″ Cut Depth
- The ks-426 slits thin-walled metal-clad cable to aid in stripping and can be used on either aluminum or steel armored cable. The variable-speed saw also cuts panels, plastic and other rigid materials up to 1/4″ thick aluminum up to 1/8″ and c. The 2500 rpm, 5 amp variable speed, electric motor has the power for any job. Mild steel to 16 gauge and lighter. Its cast aluminum saw head features a positive depth-stop that lets you set the saw blade to just penetrate the sheath, protecting the insulated wires from damage. R.
Kett Tool Saw Blade: 2″ (157-54) 12 pack
- 14 bore 7/16 maximum depth of cut 3/8 blade cuts the following materials hard aluminum fiberglass plywood, hardboard, pressed board, etc. Number of teeth 44 tpi 0. Alliance wall, color wall, mirawal and similar single faced metal laminated panels plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte.
Kett Tool Carbide Grit saw blade 3-12″ (157-800)
- Carbide grit saw blade bore 7/16 depth of cut 1-1/16 blade cuts the following materials fiberglass plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte.
Kett Tool KC102 Intermediate 18 Gauge Blade Kit F & K200
- Item weight, 001 lbs. Satisfaction ensured. Great gift idea. Excellent quality. Package quantity 1.
Kett Tool 42-20 Shear Head
- . Description 16 gauge aluminum shear head, used on kd-242, kd-442, p-542, p-1042 and discontinued k-242 and k-442 shears.
Kett Tool Saw Blade: 3-1/2″ (157-88) 12 pack
- Number of teeth 80 tpi 0. 12 bore 7/16 maximum depth of cut 1-1/16 blade cuts the following materials hard aluminum fiberglass alliance wall, color wall, mirawal and similar single faced metal laminated panels plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte.
Kett Tool 46-20L Complete 18 Gauge Profile Shear Head, Left Hand Cutting
- Kett 46-20l shear head for the kd-446l profile shear with left hand blades. The blades are made of high quality steel, heat treated and precision ground. These snips are extremely light and maneuverable at 5 pounds, the kd-446l can cut tight curves at a radius of three inches. . Cuts profile and flat materials up to 18 gauge, spiral duct, wire mesh and many other materials.
Kett Tool: 250-5 (1/4″ Jacobs chuck)
- Description this is a jacobs chuck that goes with pd-1001 pneumatic drill. The chuck can me mated to most pneumatic and electric drills. Specifications head 250-5 ( 1/4 jacobs chuck).
Kett Tool Saw Blade: 1-1/2″ (157-26) 12 pack
- 05 bore 1/4 maximum depth of cut 1/4 blade cuts the following materials mild steel 24 gauge and lighter fiberglass. Number of teeth 60 tpi 0.
Kett Tool Saw Blade: 2″ (157-53) 12 pack
- 21 bore 7/16 maximum depth of cut 3/8 blade cuts the following materials soft aluminum copper and lead fiberglass plywood, hardboard, pressed board, etc. Number of teeth 30 tpi 0.
Kett Tool Saw Blade: 1-1/2″ (157-23) 12 pack
- 1 bore 1/4 maximum depth of cut 3/16 blade cuts the following materials hard aluminum brass fiberglass alliance wall, color wall, mirawal and similar single faced metal laminated panels plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte. Number of teeth 30 tpi 0.
Kett Tool Saw Blade: 2″ (157-58) 12 pack
- 08 bore 7/16 maximum depth of cut 3/8 blade cuts the following materials mild steel 16 to 23 gauge mild steel 24 gauge and lighter fiberglass. Number of teeth 80 tpi 0.
Kett Tool Kit #400 (PN-1020 & 42-20)
- Description at home on intricate curves on flat or corrugated metal, one hand is all it takes to make perfect cuts every time. This kit now has new pn-1020 nibbler using the 253-58 motor with ergonomic handle. It will cut 18 gauge mild steel and most grades of stainless to 20 gauge at 40 per minute. The variable speed, 90 psi, pneumatic motor, cuts up to 2500 rpm. It can make tight curves up to 5/8 raduis. Specifications head 1020 head 42-20 shear attachment motor 253-58 cattying case 251-4.
Kett Tool Saw Blade: 2-1/2″ (157-68Z) 12 pack
- 08 bore 7/16 maximum depth of cut 5/8 blade cuts the following materials plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte. Number of teeth 80 tpi 0.
Kett Tool Saw Blade: 3-1/2″ (157-810Z) 12 pack
- 09 bore 7/16 maximum depth of cut 1-1/16 blade cuts the following materials plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte. Number of teeth 100 tpi 0.
Kett Tool Saw Blade: 2″ (157-56) 12 pack
- Number of teeth 60 tpi 0. 1 bore 7/16 maximum depth of cut 3/8 blade cuts the following materials mild steel 14 to 15 gauge brass fiberglass alliance wall, color wall, mirawal and similar single faced metal laminated panels plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte.
Kett Tool Saw Blade: 1-3/4″ (157-33) 12 pack
- Number of teeth 30 tpi 0. 1 bore 7/16 maximum depth of cut 5/16 blade cuts the following materials soft aluminum copper and lead fiberglass laminates (formica, micarta, texolite and panelyte) alliance wall, color wall, mirawal and similar single faced metal laminated panels.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
