24 Top Thread Cuttings

 

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #6-32 Thread Size, 1/2″ Length (Pack of 100) - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, 5/16″-18 Thread Size, 1″ Length (Pack of 25) - Slotted drive has a linear slot for use with a flat-blade driver. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Hex washer head has a flange for additional grip with the mating surface. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.

 

The Hillman Group 81446 10-32 x 3/8-Inch HWH Slotted “F” Thread Cutting Screw, 100-Pack - Designed with a blunt tapered point and multi-cutting edges. Thread cutting screws are used in applications ranging from heavy gauge sheet metal to plastic fastening. This screw can cut its own thread in mating material.

 

Harvey 016325 1-Gallon Thread Cutting Oil, Dark - Can be used on stainless steel. Used for heavy duty cutting, threading, tapping, and broaching of steel. Recent tests show that die cutting with harvey-foots oil run cooler and give sharper threads when compared with five other major brands. A superior quality cutting oil specially formulated to give sharp clean threads and extend die life. 1-gallon.

 

Steel Thread Cutting Screw, Black Oxide Finish, Hex Washer Head, Type 23, 1/4″-20 Thread Size, 1/2″ Length (Pack of 50) - Hex washer head has a nonserrated flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side. Steel is often used in applications where strength is the primary consideration. Black oxide finish offers mild corrosion resistance and lubricity. Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install.

 

Wm Harvey 016100 1 Quart Clear Thread Cutting Oil - Thread cutting oil, specially formulated to give sharp, clean threads and to extend die life. Use for heavy duty cutting, threading, tapping and broaching of steel. A superior quality cutting oil that can be used on most metals. Recent tests show that dies cutting with harvey’s oil run cooler and give sharper threads when compared with other major brands.

 

Steel Thread Cutting Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type 23, #4-40 Thread Size, 1/4″ Length (Pack of 100) - Black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install. Steel is often used in applications where strength is the primary consideration.

 

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #6-32 Thread Size, 1/2″ Length (Pack of 100) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Black oxide finish offers mild corrosion resistance and lubricity. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Steel is often used in applications where strength is the primary consideration.

 

1/4″-20 x 1 1/2″ (FT) Coarse Thread Floorboard Thread Cutting Screw 6 Lobe Flat Head Type F Low Carbon Steel Black Phosphate and Oil Pk 250 - All asmc industrial fasteners are fully traceable and lot-controlled. Please see the specifications in the table above for full details if you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order. Pictures are representative of item, but are not of the actual item product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc, may differ from picture products are guaranteed to meet the specifications to which they are manufactured specifications allow for tolerances in dimension and shape, which can vary from lot to lot. All asmc industrial fasteners are guaranteed to be of the highest quality.

 

Ridgid Thread Cutting Oils – 5 gal extreme perf. threading oil - Speeds metal removal. Ridgid thread cutting oils are free of chlorine and other halogens, pcbs and heavy metals. Nu-clear oil, clear mineral oil with low odor and anti-mist formulation special low temperature properties maintain workable viscosity to -20f. Cools threads and pipe during operation. Water washable, synthetic thread cutting fluid cleans easily off concrete, clothing, and piping with water, and also is biodegradable. Stainless steel oil, high performance mineral oil formulated to produce superior quality threads on stainless steel and black pipe. Dark oil, traditional mineral oil with low odor and anti-mist formulation.

 

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, #10-32 Thread Size, 1/4″ Length (Pack of 50) - Zinc plating resists corrosion and has a reflective appearance. Slotted drive has a linear slot for use with a flat-blade driver. Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Hex washer head has a flange for additional grip with the mating surface.

 

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #10-32 Thread Size, 1/2″ Length (Pack of 50) - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Plain surface has no finish or coating. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength.

 

Steel Thread Cutting Screw, Black Zinc Plated, Truss Head, Phillips Drive, Type F, #8-32 Thread Size, 5/8″ Length (Pack of 50) - Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a black reflective appearance. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.

 

Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Head, Phillips Drive, Type F, #4-40 Thread Size, 3/8″ Length (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface.

 

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type 23, #10-24 Thread Size, 1-1/4″ Length (Pack of 25) - Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install. Plain surface has no finish or coating. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. 18-8 stainless steel provides good corrosion resistance and strength. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Oatey 30203 Dark Cutting Oil, Speed Threading, 16-Ounce - Dark thread cutting oil for lubricating and cooling dies and cutting machines during threading process. Nsf registered and usda authorized. Anti-mist and non-staining for visibility. Mixture of sulfonated and chlorinated oils for high film strength. Dark formula for high-speed cutting machines.

 

RIDGID 70835 Thread Cutting Oil, 1 Gallon of Nu-Clear Pipe Threading Oil - Reduces threading torque. Nuclear is a low odor, anti-mist formulation thread oil. -20 degree fahrenheit working viscosity of 445 mm2/s and relative density of 09297. Cools threads and pipe during operation and speeds scrap metal removal. Improves thread quality producing the best possible results.

 

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, 5/16″-18 Thread Size, 1-1/4″ Length (Pack of 10) - Zinc plating resists corrosion and has a reflective appearance. Slotted drive has a linear slot for use with a flat-blade driver. Steel is often used in applications where strength is the primary consideration. Hex washer head has a flange for additional grip with the mating surface. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.

 

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Slotted Drive, Type F, 3/8″-16 Thread Size, 1-1/2″ Length (Pack of 10) - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening. Slotted drive has a linear slot for use with a flat-blade driver. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration.

 

uxcell® M14 x 1mm Metric Left Hand 38mm OD Round Threading Die Thread Cutting Tool - Color silver tonenet weight 52g. Package content 1 x round thread die. Thickness 14mm / 055″outside diameter 38mm / 15″. Thread type left handstandard m14x 1mm. Product name round thread diematerial steel.

 

Steel Thread Cutting Screw, Zinc Plated, Hex Head, Slotted Drive, Type F, #10-24 Thread Size, 1/2″ Length (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Hex head tightens from the side with a wrench, enabling use when there is no space above for a driver. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Zinc plating resists corrosion and has a reflective appearance. Slotted drive has a linear slot for use with a flat-blade driver.

 

Thread cutting attachment - Â¼ Shank 60° carbide thread cutting tool, complete instructions included. Allows custom internal or external threads, lh or rh to be cut on lathe. Pitches from 5 tpi to 80 tpi and 25 mm to 20 mm using 15 hobbed metal gears. Large 4 handwheel drives geartrain for complete control of threading operation. Can cut both inch and metric treads on either inch or metric machine.

 

245 Pc. Thread Cutting Nuts & Push On Retainer Assortment - Protection helps make sharp clean threads while extending the life of your dies. Heavier than white tape with density of 135-150 grams/cubic centimeter 4 mils thick. Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Complies with mil-t-22230a (asg), ul 31 ro, aga 3226 and can/ulc-s642. Light cutting oil formulated for hand thread cutting machines. Anti-mist and non-staining formula is not affected by weather. Light cutting oil, weatherproof light oil for thread cutting machines.

 

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #4-40 Thread Size, 1/2″ Length (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Black oxide finish offers mild corrosion resistance and lubricity. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.