Walton 10123 #12, 3 Flute Tap Extractor With Square Shank
- Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available.
Walton 18013 13 Piece Multi Flute Tap Extractor Set With Square Shank
- Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Packed in 15-compartment plastic case. For removing machine screws and broken hand taps. 13 piece set contains sizes #4 (3-flute), #5 (3-flute), #6 (3-flute), #8, #10, #12, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.
Walton 18001-3 6 Piece 3 Flute Tap Extractor Set With Square Shank
- Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. 6 piece set contains sizes 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″. For removing machine screws and broken hand taps. Packed in 6-compartment plastic case.
Walton 10564 9/16″, 4 Flute Tap Extractor With Square Shank
- Threads per inch need not be specified as tap extractors will fit both nc and nf taps. For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
Walton 18002 6 Piece 4 Flute Tap Extractor Set With Square Shank
- 6 piece set contains sizes 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″. For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Packed in 6-compartment plastic case.
Walton Replacement Finger for 4 Flute Tap Extractor, 5/16″ Size
- For removing machine screws and broken hand taps. Made of hardened steel to help prevent the damage of the workpieces threads. Fingers give you the ability to replace a worn out part without having to purchase an entire new tap extractor. Replacement finger for walton 4 flute, tap extractors.
Walton 20504 1/2″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank
- Pipe extractor taps are equipped with straight to help provide gripping strength everywhere they’re engaged. For pipe taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available. All walton pipe extractors are clearly marked with the proper drill size needed to drill the hole that will receive the extractor.
Walton 30434 7/16″, 4 Flute STI Tap Extractor With Square Shank
- Threads per inch need not be specified as tap extractors will fit both nc and nf taps. For helical coil wire screw thread insert taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.
Walton 30253 1/4″, 3 Flute STI Tap Extractor With Square Shank
- When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For helical coil wire screw thread insert taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.
Walton 10084 #8, 4 Flute Tap Extractor With Square Shank
- Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
Walton 30373 3/8″, 3 Flute STI Tap Extractor With Square Shank
- Threads per inch need not be specified as tap extractors will fit both nc and nf taps. For helical coil wire screw thread insert taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.
Walton 10062 #6, 2 Flute Tap Extractor With Square Shank
- For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.
Walton 30313 5/16″, 3 Flute STI Tap Extractor With Square Shank
- Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For helical coil wire screw thread insert taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.
Walton 10404 13/32″, 4 Flute Tap Extractor With Square Shank
- For removing machine screws and broken hand taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.
Walton 10102 #10, 2 Flute Tap Extractor With Square Shank
- Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. For removing machine screws and broken hand taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.
Walton 30103 #10, 3 Flute STI Tap Extractor With Square Shank
- Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For helical coil wire screw thread insert taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available.
Walton 18011-3 11 Piece 3 Flute Tap Extractor Set With Square Shank
- 11 piece set contains sizes 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″, 7/8″, 1″. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Packed in 6-compartment plastic case. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
Walton 18001-2 6 Piece 2 Flute Tap Extractor Set With Square Shank
- For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. 6 piece set contains sizes 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″. Packed in 6-compartment plastic case. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
Walton 10624 5/8″, 4 Flute Tap Extractor With Square Shank
- Threads per inch need not be specified as tap extractors will fit both nc and nf taps. For removing machine screws and broken hand taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
Walton 10064 #6, 4 Flute Tap Extractor With Square Shank
- For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available.
Walton 30314 5/16″, 4 Flute STI Tap Extractor With Square Shank
- When fingers become bent or broken or are too short for further use, replacement fingers are available. For helical coil wire screw thread insert taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.
Walton 10082 #8, 2 Flute Tap Extractor With Square Shank
- Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.
Walton 18002-3 6 Piece 3 Flute Tap Extractor Set With Square Shank
- Packed in 6-compartment plastic case. For removing machine screws and broken hand taps. 6 piece set contains sizes 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
Walton Tools 18001 Tap Extractor Set
- Replacement flutes available. The hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. 4 flute design. 3/16 inch-1/2 inch.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
