Irwin 50516 Hanson 1/4 Glass and Tile Carbide Tipped Drill Bit by Hanson
- 1/4 drill bitfor drilling glass, ceramic and tiletungsten carbide tipped,unique spear point design.
1″ X 18″ SDS CARBIDE TIPPED DRILL BIT
- These are the sds shank (also known as sds plus) rotohammer bits. These top quality bits are designed for long life and fast cutting through the toughest concrete there isn’t a better bit on the market than the ones we carry you will be very pleased with the productivity you get from our bits. They are approximately a 3/8″ diameter shank.
2 Pack Irwin 50512 Hanson 3/16″ Glass and Tile Carbide Tipped Drill Bit
- Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. . For drilling glass, ceramic and tile. Carded.
Bosch HC2122 3/4-Inch by 8-Inch SDS-Plus Shank Carbide-Tipped Masonry Drill Bit
- For use in drill requiring sds-plus shanks. Measures 3/4-inch by 8-inches. Fast dust removal provided from 4-flute design. •The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads. Sold individually. The carbide-tipped drill bit heads are harder and tougher to extreme loads. 4-flute design which provides fast dust removal.
Irwin 50532 Hanson 1/2″ Glass and Tile Carbide Tipped Drill Bit
- . For drilling glass, ceramic and tile. Carded. Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking.
SDS+ Masonry Carbide Tipped Drill Bits 1/4 x 8-5/8 (Box of 1) BC-SDS14858
- Tungsten carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads. Quadro-x 4 cutter design provides optimal performance when drilling larger diameter holes. Large flute volume for fast drilling dust transport and less clogging. Narrow flute back for reduced friction between bit and material.
64 PC Masonry Carbide Tipped Drill Bit Set 1/8 5/32 3/16 1/4 9/32 5/16 11/32 3/8
- 8 of each of the following sizes 1/8″, 5/32″, 3/16″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″. Drop forged steel construction.
Hole Saw TCT Steel Cutter Carbide Tipped Drill Bit (cutting diameter:20mm)
- Sharp gears and anti-cutting with lower consumption make the product a long service life. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type ma. Materialcarbide. The gears is made from yg8 tungsten carbide steel and the rigidity varies from. The hole saw has a twist drill bit inside ,which is undertachable.
1/2″ X 18″ Spline Shank Carbide Tipped Drill Bit
- These top quality bits are designed for long life and fast cutting through the toughest concretethere isn’t a better bit on the market than the ones we carry you will be very pleased with the productivity you get from our bits. Spline shank carbide tipped bits made in usa very high quality finest materials available stocked in many sizes perfect for both industrial and commercial usethese are the spline shank rotohammer bits. They are approximately a 3/4″ diameter shank.
8 PC Masonry Carbide Tipped Drill Bit Set 1/8 5/32 3/16 1/4 9/32 5/16 11/32 3/8
- For drilling brick, concrete, marble, tile, and stone drop forged steel construction sizes 1/8″, 5/32″, 3/16″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″.
Sandvik Coromant Delta Carbide-Tipped Drill Bit, Jobber Length, TiN Finish, Cylindrical with Flat Shank, Coolant Through, 140 Degree Point, 20mm Size, 116mm Cutting Length
- Jobber length drill bit has a midrange drilling depth of 5 times its diameter for general-purpose applications. Cylindrical shank with flat is made to iso 9766 specifications, promotes better grip than a standard round shank, and drills more precise holes than shanks with multiple flats. Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on ferrous and nonmetallic materials. Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips.
Sandvik Coromant Delta Carbide-Tipped Drill Bit, Jobber Length, TiN Finish, Whistle Notch Shank, Coolant Through, 140 Degree Point, 20mm Size, 116mm Cutting Length
- Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Jobber length drill bit has a midrange drilling depth of 5 times its diameter for general-purpose applications. Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips. Whistle notch shank offers the increased grip of a cylindrical shank and additional stability with the small angle of its flat. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on steel than an uncoated drill bit.
5/8″ X 18″ SDS CARBIDE TIPPED DRILL BIT
- They are approximately a 3/8″ diameter shank. These top quality bits are designed for long life and fast cutting through the toughest concrete there isn’t a better bit on the market than the ones we carry you will be very pleased with the productivity you get from our bits. These are the sds shank (also known as sds plus) rotohammer bits.
Sandvik Coromant Delta Carbide-Tipped Drill Bit, Jobber Length, TiN Finish, Cylindrical with Flat Shank, Coolant Through, 140 Degree Point, 1/2″ Size, 3-6/16″ Cutting Length
- Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips. Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Cylindrical shank with flat is made to iso 9766 specifications, promotes better grip than a standard round shank, and drills more precise holes than shanks with multiple flats. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on steel. Jobber length drill bit has a midrange drilling depth of 5 times its diameter for general-purpose applications.
16 PC Masonry Carbide Tipped Drill Bit Set 1/8 5/32 3/16 1/4 9/32 5/16 11/32 3/8
- 2 of each of the following sizes 1/8″, 5/32″, 3/16″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″. Drop forged steel construction.
Irwin 50520 Hanson 5/16″ Glass and Tile Carbide Tipped Drill Bit
- Carded. Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. For drilling glass, ceramic and tile.
5/8″ X 6″ SDS CARBIDE TIPPED DRILL BIT
- They are approximately a 3/8″ diameter shank. These top quality bits are designed for long life and fast cutting through the toughest concrete there isn’t a better bit on the market than the ones we carry you will be very pleased with the productivity you get from our bits. These are the sds shank (also known as sds plus) rotohammer bits.
3/8″ X 18″ Spline Shank Carbide Tipped Drill Bit
- These are the spline shank rotohammer bits. These top quality bits are designed for long life and fast cutting through the toughest concrete. They are approximately a 3/4″ diameter shank.
Irwin 50524 Hanson 3/8″ Glass and Tile Carbide Tipped Drill Bit
- Carded. Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. For drilling glass, ceramic and tile.
Bellcan Bc-SDS716658 TRU-CUT MFG SDS+ Masonry Carbide Tipped Drill Bits 7/16 X 6-5/8 (Box of 1)
- Large flute volume for fast drilling dust transport and less clogging. Tungsten carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads. Narrow flute back for reduced friction between bit and material. Quadro-x 4 cutter design provides optimal performance when drilling larger diameter holes.
8 PC Masonry Carbide Tipped Drill Bit Set 1/8 5/32 3/16 1/4 9/32 5/16 11/32 3/8
- Sizes 1/8″, 5/32″, 3/16″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″. Drop forged steel construction.
Drill America DAM Series Carbide-Tipped Masonry Drill Bit, Black Oxide Finish, 1/4″ Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/4″ Size, 30″ Length (Pack of 1)
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Carbide-tipped tools feature cutting edges of carbide for wear resistance and a steel shank for toughness. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Designed for use in portable electric drill.
Sandvik Coromant Delta Carbide-Tipped Drill Bit, Short Length, TiN Finish, Cylindrical with Flat Shank, Coolant Through, 140 Degree Point, 28.5mm Size, 131mm Cutting Length
- Cylindrical shank with flat is made to iso 9766 specifications, promotes better grip than a standard round shank, and drills more precise holes than shanks with multiple flats. Short length drill bit has a drilling depth of 35 times its diameter and offers increased rigidity for heavy feed-rate applications. Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips. Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on ferrous and nonmetallic materials.
SDS+ Masonry Carbide Tipped Drill Bits 5/32 x 6-5/8 (Box of 1) BC-SDS532658
- Large flute volume for fast drilling dust transport and less clogging. Narrow flute back for reduced friction between bit and material. Tungsten carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads. Quadro-x 4 cutter design provides optimal performance when drilling larger diameter holes.
SDS+ Masonry Carbide Tipped Drill Bits 1/4 x 6-3/8 (Box of 1) BC-SDS14638
- Large flute volume for fast drilling dust transport and less clogging. Tungsten carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads. Quadro-x 4 cutter design provides optimal performance when drilling larger diameter holes. Narrow flute back for reduced friction between bit and material.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
