Jet GH-2280ZX With Newall DP700 DRO With Taper Attachment and Collet Closer
- Includes factory warranty. Uniquely designed exclusively by jet. Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. Chrome molybdenum headstock gears are hardened, ground and shaved. 3-1/8 bore spindle is supported by two tapered and one ball bearing.
JET 322406 Lathe with ACU-RITE VUE DRO and Taper Attachment & Collet Closer
- D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings. Splined, not keyed, shafts are utilized in the headstock. Includes factory warranty. Uniquely designed exclusively by jet. Headstock is constantly oiled during operation.
JET 321526 Lathe with 200S DRO & Collet Closer
- Splined, not keyed, shafts are utilized. Uniquely designed exclusively by jet. Headstock is constantly oiled during operation. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Hardened and ground gears are featured in the headstock and gearbox.
JET Gh-1340W-1 Lathe with 411 DRO, TAK and Collet Closer
- Uniquely designed exclisively by jet. Headstock is constantly oiled during operation. Splined, not keyed, shafts are utilized in the headstock. D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings. Hardened and ground gears are featured in the headstock and gearbox.
Jet 321173 GH-1440W-1 Geared Head Engine Lathe with Acu-Rite Vue DRO and Collet Closer 3HP 230/460V 1PH
- Precision ground components. Rear mounted lever action. Uses 5c collets. Specially designed for each model. Includes factory warranty.
5C-CC Lever Collet Closer for 5C Collets
- . Lever collet closer is faster and easier to use than a ring closer. 5c collet blocks are great for fast, short run, set-ups.
Sherline 1153 – Collet Closer Stop Kit
- Included are four different length rods for various ranges of adjustment. This listing is for the collet closer stop kit. The rods are held in place by a set screw. A scribed mark 1. With the proper rod in place, the material is inserted in the collet until it hits the stop, providing a consistent position for a series of identical parts. Sherline 1153, collet closer stop kitthe stop block threads into the back of the collet knob. 5″ from the end of each rod shows when the rod is extended past a safe operating distance from the end of the spindle. Please note that pictured is the collet closer itself and is for reference only, the collet closer is sold separately. If the scribed line can be seen, the next shorter rod should be substituted.
JET GH-1340W-3 Lathe with Collet Closer Installed
- Hardened and ground gears are featured in the headstock and gearbox. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Headstock is constantly oiled during operation. Uniquely designed exclusively by jet. Splined, not keyed, shafts are utilized.
JET GH-1340W-3 Lathe with ACU-RITE 200S DRO and Collet Closer
- Hardened and ground gears are featured in the headstock and gearbox. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Headstock is constantly oiled during operation. Uniquely designed exclusively by jet. Splined, not keyed, shafts are utilized.
JET GH-1440W-3 Lathe with VUE DRO and Collet Closer
- Headstock is constantly oiled during operation. Splined, not keyed, shafts are utilized in the headstock. Hardened and ground gears are featured in the headstock and gearbox. Uniquely designed exclusively by jet. D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings.
JET 321613 Lathe with 300S DRO and Collet Closer
- Includes factory warranty. Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. Uniquely designed exclusively by jet. Includes factory warranty. 3-1/8 bore spindle is supported by two tapered and one ball bearing.
JET GHB-1340A with DP700 DRO and Collet Closer
- Fast, easy speed changes. Hardened and ground gears are featured in the headstock and gearbox. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Enclosed gearbox design provides smooth, quiet operation. One of the most popular jet lathes now comes with an enclosed gearbox as a standard feature.
JET GH-1880ZX Lathe with 2-axis ACU-RITE DRO 200S, Collet Closer and Taper Attachment Installed
- Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. Uniquely designed exclusively by jet. Iso 9001 certified manufacturer. Chrome molybdenum headstock gears are hardened, ground and shaved. 3-1/8 bore spindle is supported by two tapered and one ball bearing.
Jet 321226 GHB-1340A Lathe with VUE DRO, Taper Attachment and Collet Closer Installed
- Enclosed gearbox design provides smooth and quiet operation. Induction hardened and ground v-way bed. Hardened ground gears in headstock and gearbox. D1-4 spindle is precision grounded for accuracy and supported by high quality taper roller bearings. Adjustable gibs incorporated into carriage and sideways.
JET GH-1440W-1 Lathe with ACU-RITE 200S DRO and Collet Closer Installed
- Headstock is constantly oiled during operation. Splined, not keyed, shafts are utilized. Uniquely designed exclusively by jet. Hardened and ground gears are featured in the headstock and gearbox. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings.
JET 321592 Lathe with 300S DRO and Collet Closer
- D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Headstock is constantly oiled during operation. Hardened and ground gears are featured in the headstock and gearbox. Includes factory warranty. Splined, not keyed, shafts are utilized.
JET GH-1440W-3 Lathe with Collet Closer
- Splined, not keyed, shafts are utilized in the headstock. Headstock is constantly oiled during operation. D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings. Hardened and ground gears are featured in the headstock and gearbox. Uniquely designed exclusively by jet.
5C HEX SQUARE Closer Rings Collet Block Chuck Milling Lathe Surface Grinder 5 PC
- For fast set ups on milling, lathe, surface grinder & drill presses for parallel, square or hex shapes as well as for cross-hole drilling at 60º, 90º or 120º. Made of steel hardened and ground to. 0005″.
JET CC-GHW, Collet Closer for All W Lathe Models
- Collet closer. Rear mounted lever action. Uses 5c collets. Specially designed for each model. Precision ground components.
JET GHB-1340A Lathe with Collet Closer and Tak
- Enclosed gearbox design provides smooth, quiet operation. One of the most popular jet lathes now comes with an enclosed gearbox as a standard feature. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Fast, easy speed changes. Hardened and ground gears are featured in the headstock and gearbox.
JET GH-1340W-1 Lathe with VUE DRO and Collet Closer
- Headstock is constantly oiled during operation. Splined, not keyed, shafts are utilized. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Hardened and ground gears are featured in the headstock and gearbox. Uniquely designed exclusively by jet.
JET GH-2280ZX with 2-axis ACU-RITE 200S DRO and Collet Closer and Taper Attachment
- Iso 9001 certified manufacturer. Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. 3-1/8 bore spindle is supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Uniquely designed exclusively by jet.
5C Collet Fixture Block Chuck HEX SQUARE Closer Rings Milling Lathe Mill Grinder
- For fast set ups on milling, lathe, surface grinder & drill presses for parallel, square or hex shapes as well as for cross-hole drilling at 60º, 90º or 120º. 0005″. Made of steel hardened and ground to.
JET GH-1440W-3 Lathe with ACU-RITE 200S DRO and Collet Closer
- Hardened and ground gears are featured in the headstock and gearbox. Splined, not keyed, shafts are utilized. Uniquely designed exclusively by jet. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Headstock is constantly oiled during operation.
JET GH1440ZX Lathe with ACU-RITE 200S DRO and Collet Closer Installed
- Uniquely designed by jet. Chrome molybdenum headstock gears are hardened, ground and shaved. 3-1/8 bore spindle is supported by two tapered and one ball bearing. Iso9001 certified manufacturer. Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
