ITW Ramset Red Head V4-8 VIPER4 8′ Extension Pole with Trigger
- Will only work on the new v4 viper-guns specifications length 8 ft dimensions 96 x 3. 5 x 4 inches number of handles 1. The new poles have an internal rod, when activated by pushing on the pole sleeve triggers the new viper. Includes (1) viper4 8′ extension pole with trigger for use with viper4 features viper4 is connected with viper poles by set-screw to avoid a manual tightness check viper4 works with newly designed ramset for greater ease and accuracy.
Ramset Powder Fastening Systems 1524SDE 3-Inch Washer Pins with Ramguard,100 Pack
- Shank diameter = 145 head diameter = 300. Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel. Square washer indicates 3 inch pin has been installed. Comes 100 per box. Designed for use in treated lumber applications.
Ramset Powder Fastening Systems 2-1/2-Inch Washer Pin w/ Ramguard (100 per box)
- Powder actuated fasteners. Washer increases bearing surface against the material to be fastened. Comes 100 per box. Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel. Designed for use in treated lumber applications. Shank diameter = 145 head diameter = 300. Itw ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel. Coated to improve corrosion resistance in treated lumber and other applications.
Ramset 00810 2-1/2-inch Low Velocity Powder Washer Pin Fasteners, 75-Pack
- For use with the ramset, hilti, remington, simpson, jamerco, and powers fastening tools purchase a 15-pack of ramset 00804 washer drive pin fasteners for securing 2×4 wood to concrete during construction in unfinished basements. Includes (75) 00810 2-1/2-inch low velocity powder washer pin fasteners. .
Ramset 32Cw Box Of 100 #3 “Green” 22 Cal Single Shot Loads(Sold By 2 Pack)
- 100 loads per boxpower level for green is 3fits all 22 cal. Single shot low velocity unitspower level is designated by the load level number marked on each box also by the color of the box and each powder loadas the number increases, the power level increases.
Ramset Powder Fastening Systems 1514SD 2-Inch Washered Pins, 100 Pack
- 300 head with premounted washer. Single shots, 27cal. 5mm) shank dia 0. That use 22cal. “Ramset” washered pin 0. 10shot strips and 25cal. 145″ with 7/8″ washer to prevent overdrive and to increase holding value. Qty 100 boxed length 2″. Shank length 2-1/2″ (63. Discs. Fits ramset, hilti, remington & most powder actuated tools.
ITW Ramset TF1200 TrakFast Fastener Gun Bundle w/ FPP034B TrakFast 3/4″ 1000pk Black Pins and a T-FUEL Trakfast Fuel (3 Items)
- For high volume, repetitive fastenings to concrete and steel such as drywall track to concrete. Bundle includes (1) itw ramset tf1200, (1) itw ramset fpp034b, and (1) itw ramset t-fuel. Tool automatically resets pistonno recoil, tool absorbs shock resulting in less operator fatigue. Extra fuel cell comes in handy when working on long jobs. Fpp034b includes 1000 pins 1 fuel cell.
ITW Ramset Red Head T3034B 3/4″ Concrete Pin with T3 Fuel Cell
- Change fuel cells in seconds with the fuel eject button no valves to press, no fuel doors to close. Bigger pin means better success rate. New 15 pin strip means less loading and more shooting. Each fuel cell contains 1000 shots. Point collation virtually eliminates jams.
Ramset Powder Fastening Systems 1524SDP 3-Inch Washered Pins, 100 Pack
- Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel. Shank diameter =. 145 head diameter =. It comes 100 per box. Ramset powder fastening systems 1524sdp 3-inch washered pin are drive pins with washers to increase bearing surface against the material to be fastened. A square washer indicates 3-inch pin has been installed. The metal washer is 16 gauge. 300.
Ramset RAM 100 1/2 hp Slide Gate Opener 120VAC Continous Duty Motor
- Motor continuous duty 1/2 hp, 120vac, 50/60 hz emergency release foot pedal release, power inverter. Ramset 100 slide gate opener / operator max gate size 20′ max gate weight 700 lbs. Per ul325-2016 all gate operators sold in the usa after february 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment. The ram 100 is perfect for both residential and light duty commercial applications. Electronic reversing device (erd) two separate adjustment reversing when encountering obstruction.
Ramset VIPER4 0.27 Caliber Strip Powder Tool
- Simplified barrel retention collar makes it so that no tools are required for assembly or disassembly. Completely redesigned open-ended muzzle keeps your tool cleaner longer. Load is advanced consistently each time the viper is fired. Allows you to work faster. Heavy duty buffer system prevents front end damage caused by piston overdrive-especially through sprayed-on insulation. Automatic piston return so that no time is spent manually resetting or cycling the tool. The load advance is now located internally to allow a push/sleeve actuated operation. Compatible with the newly designed poles, the rear collar is connected by set-screw to avoid a manual tightness check. The new ramset viper4. 27 caliber strip powder tool design makes overhead applications even easier.
Ramset 3Rs27 Box Of 100 #3 “Green” 27 Cal Strip Loads(Sold By 2 Pack)
- 100 loads per box (10 strips at 10 loads per strip)power level for green is 3strips fit the following units sa270, cobra, viper, rocket and hilti models dx-350, dx-351, dx-36m and dx460power level is designated by the load level number marked on each box also by the color of the box and each powder loadas the number increases, the power level increasesrecommended replacement for the m-s27sl3. .
New Ramset 1512 Box (100) 1 1/2″ Powder Actuated Tool .300 Headed Nails 2533693
- Powder actuated tool nailsramset factory sealed newwe will also combine shipping and ship. Each additional box for 100 shippinguse with ramset hilti remington and most powder. Actuated tools that use 22cal single shots 27cal 10 strips and 25cal discs for models. Of low velocity powder actuated tools with300 or larger barrel diameter knurled shank pins.
ITW Ramset Red Head TF1200 TrakFast Fastener Gun
- No licensing required unlike powderactuated tools, no licensing is required. Easy to use tool automatically resets piston. Contractors continue to report tremendous savings when using trakfast for high production fastening. No recoil, tool absorbs shock resulting in less operator fatigue. They have learned that trakfast’s actual cost in place beats all other systems. 2 year warranty (6 months on wearable parts). The trakfast automatic fastening system fastens all types of track, from standard track to hat channel, deep leg, z, and j channel. Narrow nose profile allows tool to reach inside deep leg track (1-5/8″ wide x 2″ high). The increased speed and productivity of trakfast allows the contractor to bid more competitively, complete the job sooner and move on to the next job. It’s that easy. No changing loads trakfast uses a fuel cell, not a load. Anyone can use trakfast-just load the pins and fire. Three to five times faster than powder tools 42-pin magazine reduces load time. Features increased durability and reliability off position to prevent draining the battery when tool is not in use. Specifications gas technology fully automatic 1-1/2″ pin capacity 42 pin magazine capacity maximum capacity 42 pins maximum cycles/second 2 fuel cell 1000 shots battery (charged) 3000 shots length 15″ height 17″ includes (1) trakfast (2) batteries (1) battery charger since its introduction in 1991, trakfast has been the tool of choice for both interior and exterior contractors. No need to inventory different colored loads.
ITW Ramset Red Head T-FUEL Trakfast Fuel
- Leave the cell in until it’s completely used up when it’s used up press the quick release fuel cell eject button and dispose of it the same way you would a used can of spray paint. Fuel cell vs powder load comparison the average cost savings to deliver 1000 shots for the ramset t3ss fuel cell is between 50-70% less expensive compared to powder. Easy to install, just drop it in and click to engage. The basis of ramset gas actuated fastening tools are the fuel cells.
Ramset 1516 Box Of 100 2-1/2 Inch Pins(Sold By 2 Pack)
- 145 shank diameter100 pins per boxfits ramset, hilti, remington and most powder actuated tools that use 22 cal. Discsdesigned for use in concrete and structural steel applications2-1/2 inch shank length. 10 shot strips and 25 cal. 0. 300 head diameter and. Single shots, 27 cal.
ITW Ramset Red Head FPP034B TrakFast 3/4″ Black Pin with Fuel
- Itw ramset red head fpp034b specifications size 3/4″ shank diameter. 109 head diameter. 250itw ramset red head fpp034b includes 1000 pins 1 fuel cellitw ramset red head fpp034b features for high volume, repetitive fastenings to concrete and steel such as drywall track to concrete for use with tf1100 nail gun (sold separately).
Ramset Powder Fastening Systems 3-Inch Pin w/ Ramguard (100 per box)
- Shank diameter = 145 head diameter = 300. Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel. Comes 100 per box. Designed for use in treated lumber applications. Powder actuated fasteners.
ITW Ramset Red Head T3FUELPK T3SS Fuel Cell (2pk)
- The basis of ramset gas actuated fastening tools are the fuel cells. Easy to install, just drop it in and click to engage. Fuel cell vs powder load comparison the average cost savings to deliver 1000 shots for the ramset t3ss fuel cell is between 50-70% less expensive compared to powder. Leave the cell in until it’s completely used up when it’s used up press the quick release fuel cell eject button and dispose of it the same way you would a used can of spray paint.
Ramset Powder Fastening Systems TF1100 TrakFast
- . Trakfast, 6v automatic fastening tool, fasten all types o track, from standard track to hat channel, deep leg, z & j channel, 6v rechargeable ni-cd battery can drive approximately 3000 shots per charge.
ITW Ramset Red Head V4-6 VIPER4 6′ Extension Pole with Trigger
- 5 x 4 inches number of handles 1. Only works with new v4 viper guns specifications length 6 ft dimensions 72 x 3. The new poles have an internal rod, when activated by pushing on the pole sleeve triggers the new viper. Note image may vary slightly from actual product includes (1) viper4 6′ extension pole with trigger for use with viper4 features viper4 is connected with viper poles by set-screw to avoid a manual tightness check viper4 works with newly designed ramset for greater ease and accuracy.
Ramset Powder Fastening Systems 1510SD 1-1/4-Inch Washered Pins, 100 Pack
- Single shots, 27cal. . Washered pin is one of many top quality items in our power hammer pins department. Rental. Discs. With 7/8″ washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all ramset, hilti, remingtion and most powder actuated tools that use 22cal. 10 shot strips and 25cal. Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability.
ITW Ramset Red Head FPP100T TrakFast 1″ Plated Pin with Breakaway Strip & Fuel
- 109 head diameter. Itw ramset red head fpp100t specifications size 1″ shank diameter. 250itw ramset red head fpp100t includes 1000 pins 1 fuel cellitw ramset red head fpp100t features for high volume, repetitive fastenings to concrete such as wood furring to concrete collation designed to breakaway on impact for use with tf1100 nail gun (sold separately).
Ramset Powder Fastening Systems COBIII Cobra Tool Kit
- One strip of loads drives ten pins. Ideal for attaching 2 by 4’s, furring strips, and electrical boxes to concrete and steel. Padded handle absorbs recoil, 27 caliber. Fastens up to 3-inch drive pins with washer. Semi-automatic tool for general construction and remodeling jobs.
Ramset Power Fastening Systems SDC125 1-1/4-Inch Pin with Angle Clip (Pack of 1000)
- Specifically fabricated to meet the exacting requirements of toughness and durability. Comes 1000 per box. Shank diameter = 145 head diameter = 300. Designed for suspended ceilings and other overhead applications. Preassembled to a 14 gauge angle clip.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
