25 Top Carbide Tipped Bandsaw Blades

 

Magnate M99E34T3 Carbide Tipped Bandsaw Blade, 99″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness - Steel). Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Ebony, koa or cocabolo, abrasive non-ferrous materials. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99 inch ( 8 ft. This method will provide the most possible accurate length. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. E. 2, if the owner’s manual is not available, refer to previous invoices. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. 3 inch, 8′ 3″ ) bandsaw blades suit the following modelspowermatic 140, 143 artisan 14″ wellsaw 613 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. The picture depicted represents one blade the pricing is for one blade/package. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. The new high performance back steel offers excellent fatigue life. E. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels.

 

Magnate M105E12T3 Carbide Tipped Bandsaw Blade, 105″ Long – 1/2″ Width; 3 Tooth; 0.025″ Thickness - Designed for composite materials, rough cutting of abrasive wood and plywood. Carbide-tipped blades are designed to be extremely wear resistant. Specially formulated submicron grade of carbide and triple tooth geometry. Smooth finish for less secondary work exceptionally long life and fast cutting. Wood or metal cutting 1/2″ width 3 tooth 0025″ thickness.

 

Magnate M143E1V2 Carbide Tipped Bandsaw Blade, 143″ Long – 1″ Width; 2-3 Variable Tooth - 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. 2, if the owner’s manual is not available, refer to previous invoices. 11 inch, 11′ 11″ ) bandsaw blades suit the following modelsgrizzly g0514x, g0514x2, g0514x2b, g0514x3 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. This method will provide the most possible accurate length. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. E. The new high performance back steel offers excellent fatigue life. Ebony, koa or cocabolo, abrasive non-ferrous materials. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Steel). This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 143 inch ( 11 ft. E.

 

Magnate M143E38T3 Carbide Tipped Bandsaw Blade, 143″ Long – 3/8″ Width; 3 Tooth; 0.032″ Thickness - E. 2, if the owner’s manual is not available, refer to previous invoices. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. This method will provide the most possible accurate length. The new high performance back steel offers excellent fatigue life. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 11 inch, 11′ 11″ ) bandsaw blades suit the following modelsgrizzly g0514x, g0514x2, g0514x2b, g0514x3 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Ebony, koa or cocabolo, abrasive non-ferrous materials. E. The picture depicted represents one blade the pricing is for one blade/package. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 143 inch ( 11 ft. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel).

 

Magnate M133E1T3 Carbide Tipped Bandsaw Blade, 133″ Long – 1″ Width; 3 Tooth; 0.035″ Thickness - There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 133 inch ( 11 ft. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. This method will provide the most possible accurate length. The picture depicted represents one blade the pricing is for one blade/package. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. The new high performance back steel offers excellent fatigue life. Steel). 1 inch, 11′ 1″ ) bandsaw blades suit the following models jet jwbs-18 18″ dayton 2ac29 18″ rikon 10-336 grizzly g8146z (133-3/4″ to 136-1/4″) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Ebony, koa or cocabolo, abrasive non-ferrous materials. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. 2, if the owner’s manual is not available, refer to previous invoices. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E.

 

Magnate M130E34T3 Carbide Tipped Bandsaw Blade, 130″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness - Positive rake angle allows faster penetration for high production cutting. Wood or metal cutting 3/8″ width 3 tooth 0032″ thickness. Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Wood or metal cutting 1″ width 3 tooth 0035″ thickness. Wood or metal cutting 3/4″ width 3 tooth 0035″ thickness.

 

Magnate M131.5E12T3 Carbide Tipped Bandsaw Blade, 131-1/2″ Long – 1/2″ Width; 3 Tooth - 11-1/2 inch, 10′ 11-1/2″ ) bandsaw blades suit the following modelsgrizzly g0513 g0513x2 g0513b g0640x 17″ general international 90-320 m1 (metalcutting) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. The picture depicted represents one blade the pricing is for one blade/package. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Steel). This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. Ebony, koa or cocabolo, abrasive non-ferrous materials. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 2, if the owner’s manual is not available, refer to previous invoices. The new high performance back steel offers excellent fatigue life. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 131-1/2 inch ( 10 ft. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. E. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This method will provide the most possible accurate length.

 

Magnate M93E12T3 Carbide Tipped Bandsaw Blade, 93″ Long – 1/2″ Width; 3 Tooth; 0.025″ Thickness - Wood or metal cutting 1/2″ width 3 tooth 0025″ thickness. Made in the usa. Carbide-tipped blades are designed to be extremely wear resistant. Specially formulated submicron grade of carbide and triple tooth geometry. Designed for composite materials, rough cutting of abrasive wood and plywood.

 

Magnate M72.5E38T3 Carbide Tipped Bandsaw Blade, 72-1/2″ Long – 3/8″ Width; 3 Tooth - Positive rake angle allows faster penetration for high production cutting. Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Wood or metal cutting 1″ width 3 tooth 0035″ thickness. Carbide tipped teeth increase wear resistance cutting high temperature alloys. Wood or metal cutting 3/8″ width 3 tooth 0032″ thickness.

 

Magnate M131.5E1V2 Carbide Tipped Bandsaw Blade, 131-1/2″ Long – 1″ Width; 2-3 Variable Tooth - E. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 131-1/2 inch ( 10 ft. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. This method will provide the most possible accurate length. 2, if the owner’s manual is not available, refer to previous invoices. 11-1/2 inch, 10′ 11-1/2″ ) bandsaw blades suit the following modelsgrizzly g0513 g0513x2 g0513b g0640x 17″ general international 90-320 m1 (metalcutting) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Steel). Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. The new high performance back steel offers excellent fatigue life. Ebony, koa or cocabolo, abrasive non-ferrous materials. The picture depicted represents one blade the pricing is for one blade/package.

 

Magnate M80E12T3 Carbide Tipped Bandsaw Blade, 80″ Long – 1/2″ Width; 3 Tooth; 0.025″ Thickness - Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. The new high performance back steel offers excellent fatigue life. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. 2, if the owner’s manual is not available, refer to previous invoices. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. This method will provide the most possible accurate length. Steel). The picture depicted represents one blade the pricing is for one blade/package. Ebony, koa or cocabolo, abrasive non-ferrous materials.

 

Magnate M143E34T3 Carbide Tipped Bandsaw Blade, 143″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness - The new high performance back steel offers excellent fatigue life. 11 inch, 11′ 11″ ) bandsaw blades suit the following modelsgrizzly g0514x, g0514x2, g0514x2b, g0514x3 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 2, if the owner’s manual is not available, refer to previous invoices. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. The picture depicted represents one blade the pricing is for one blade/package. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 143 inch ( 11 ft. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. Ebony, koa or cocabolo, abrasive non-ferrous materials. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. This method will provide the most possible accurate length. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. E. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Steel).

 

Magnate M103E1V3 Carbide Tipped Bandsaw Blade, 103″ Long – 1″ Width; 3-4 Variable Tooth - Positive rake angle allows faster penetration for high production cutting. Plastic capping protects teeth against damage in transit and handling. Measures 162-inches length by 1-inches width by 0042-inches thick. Carbide tipped teeth increase wear resistance cutting high temperature alloys. Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness.

 

Magnate M67E38T3 Carbide Tipped Bandsaw Blade, 67″ Long – 3/8″ Width; 3 Tooth; 0.032″ Thickness - 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Steel). 7 inch, 5′ 7″ ) bandsaw blades suit the following models ryobi bs1001svtradesman 8168 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. This method will provide the most possible accurate length. E. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. 2, if the owner’s manual is not available, refer to previous invoices. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 67 inch ( 5 ft. Ebony, koa or cocabolo, abrasive non-ferrous materials. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. The new high performance back steel offers excellent fatigue life. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i.

 

Magnate M127.875E1V3 Carbide Tipped Bandsaw Blade, 127-7/8″ Long – 1″ Width; 3-4 Variable Tooth - Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Plastic capping protects teeth against damage in transit and handling. Positive rake angle allows faster penetration for high production cutting. Triple chip geometry provides smoother surface finish. Measures 150-inches length by 1/2-inches width by 0035-inches thick.

 

Magnate M131E1V2 Carbide Tipped Bandsaw Blade, 131″ Long – 1″ Width; 2-3 Variable Tooth - 4, upon requested, magnate makes blades of any length and types to fit your brand and model. 11 inch, 10′ 11″ ) bandsaw blades suit the following modelgrizzly g0664 (metalcutting). 2, if the owner’s manual is not available, refer to previous invoices. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Ebony, koa or cocabolo, abrasive non-ferrous materials. The picture depicted represents one blade the pricing is for one blade/package. If in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. This method will provide the most possible accurate length. Steel). The new high performance back steel offers excellent fatigue life. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 131 inch ( 10 ft. E. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced.

 

Magnate M103E1V2 Carbide Tipped Bandsaw Blade, 103″ Long – 1″ Width; 2-3 Variable Tooth - Positive rake angle allows faster penetration for high production cutting. Wood or metal cutting 1″ width 2-3 variable tooth 0035″ thickness. Measures 162-inches length by 1-inches width by 0042-inches thick. Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Carbide tipped teeth increase wear resistance cutting high temperature alloys.

 

Magnate M93E34T3 Carbide Tipped Bandsaw Blade, 93″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness - Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 2, if the owner. 9 inch, 7′ 9″ ) bandsaw blades suit the following models sears craftsman professional 7″ x 12″ dayton 5z412 6″ x 10″, wilton 3400 6″ x 10″ grizzly g0580x, g0555x (92-1/2″ to 93-1/2″), g1758 7″ x 12″,g9978 7″ x 12″ enco 137-3163, 137-3167, 137-3169, 137-3171, 137-3175, 137-3178, 137-3190, 137-3195, 137-2000, swivel head, 240-7179 black and decker 1752delta 28-243, 28-283,28-203, 28-303, 28-240 jet hvbs-7m, hvbs-7mw, j-3410 7″ x 12″ dake se712 general international 90-740 m1 90-700 m1 90-725 m1 90-730 m1 wellsaw 58bd, 58bw (6-1/. E. 2″ x 9-1/2″ ) northern industrial 8 model th203-004 roll in turn pro swivel head if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 93 inch ( 7 ft. The new high performance back steel offers excellent fatigue life. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Ebony, koa or cocabolo, abrasive non-ferrous materials. The picture depicted represents one blade the pricing is for one blade/package. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Steel).

 

Magnate M106E34T3 Carbide Tipped Bandsaw Blade, 106″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness - Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. If in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. This method will provide the most possible accurate length. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. The new high performance back steel offers excellent fatigue life. Ebony, koa or cocabolo, abrasive non-ferrous materials. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. E. Steel). 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 106 inch ( 8 ft. 2, if the owner’s manual is not available, refer to previous invoices. The picture depicted represents one blade the pricing is for one blade/package. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. 10 inch, 8′ 10″ ) bandsaw blades suit the following modelsgrizzly go457, 8145z (105-1/4 to 109-1/4).

 

Magnate M99.75E12T3 Carbide Tipped Bandsaw Blade, 99-3/4″ Long – 1/2″ Width; 3 Tooth - This method will provide the most possible accurate length. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Steel). This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. Ebony, koa or cocabolo, abrasive non-ferrous materials. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. The picture depicted represents one blade the pricing is for one blade/package. 2, if the owner’s manual is not available, refer to previous invoices. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. The new high performance back steel offers excellent fatigue life. 3-3/4 inch, 8′ 3-3/4″ ) bandsaw blades suit the following models craftsman professional 14 general international 90-100 m1 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99-3/4 inch ( 8 ft. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i.

 

Magnate M105E34T3 Carbide Tipped Bandsaw Blade, 105″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness - 9 inch, 8′ 9″ ) bandsaw blades suit the following modelsjet jwbs-14dxpro general international 90-200 m1 (woodworking 93-1/2 to 106-3/8) grizzly g9743 ( 7 x 12 ), 8145z (105-1/4 to 109-1/4) dake se912 (metalcutting) most 14″ bandbaws with riser block kits installed. If in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. E. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. The picture depicted represents one blade the pricing is for one blade/package. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Steel). There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 105 inch ( 8 ft. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. The new high performance back steel offers excellent fatigue life. This method will provide the most possible accurate length. 2, if the owner’s manual is not available, refer to previous invoices. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. Ebony, koa or cocabolo, abrasive non-ferrous materials.

 

Magnate M143E1T3 Carbide Tipped Bandsaw Blade, 143″ Long – 1″ Width; 3 Tooth; 0.035″ Thickness - The new high performance back steel offers excellent fatigue life. E. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 143 inch ( 11 ft. The picture depicted represents one blade the pricing is for one blade/package. E. This method will provide the most possible accurate length. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 2, if the owner’s manual is not available, refer to previous invoices. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Ebony, koa or cocabolo, abrasive non-ferrous materials. 11 inch, 11′ 11″ ) bandsaw blades suit the following modelsgrizzly g0514x, g0514x2, g0514x2b, g0514x3 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Steel). Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.

 

Magnate M136E1V3 Carbide Tipped Bandsaw Blade, 136″ Long – 1″ Width; 3-4 Variable Tooth - Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Wood or metal cutting 1″ width 3 tooth 0035″ thickness. Wood or metal cutting 3/8″ width 3 tooth 0032″ thickness. Positive rake angle allows faster penetration for high production cutting. Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness.

 

Magnate M131.5E34T3 Carbide Tipped Bandsaw Blade, 131-1/2″ Long – 3/4″ Width; 3 Tooth - 11-1/2 inch, 10′ 11-1/2″ ) bandsaw blades suit the following modelsgrizzly g0513 g0513x2 g0513b g0640x 17″ general international 90-320 m1 (metalcutting) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 2, if the owner’s manual is not available, refer to previous invoices. E. Ebony, koa or cocabolo, abrasive non-ferrous materials. E. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 131-1/2 inch ( 10 ft. The picture depicted represents one blade the pricing is for one blade/package. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. Steel). The new high performance back steel offers excellent fatigue life. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. This method will provide the most possible accurate length. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length.

 

Magnate M142E34T3 Carbide Tipped Bandsaw Blade, 142″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness - There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 142 inch ( 11 ft. The new high performance back steel offers excellent fatigue life. E. This method will provide the most possible accurate length. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. 2, if the owner’s manual is not available, refer to previous invoices. Steel). It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 10 inch, 11′ 10″ ) bandsaw blades suit the following models18″ rikon 10-340, 10-345, 10-370 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Ebony, koa or cocabolo, abrasive non-ferrous materials. The picture depicted represents one blade the pricing is for one blade/package.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.