Best 17 Wet Tile Saws

 

SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System - Aluminum table top is a durable, rust-resistant surface. Sliding side extension provides support for tiles up to 18 x 18-in. Adjustable rip fence with miter gauge for accurate straight and miter cuts. Bevel cuts tile at 0, 225 and 45 degrees, giving flexibility for different cut types. Hydro lock water containment system keeps water contained near the blade and reduce clean-up time.

 

DeWalt D24000 Wet Tile Saw with Slide Table 110 Volt - Cantilevering rail/cart system allows for 24″ ripping capacity, 18″ tile on diagonal. Integrated 45/225° miter feature for quick angled cuts. Compact tile saw frame allows for easy transport and storage in vehicle, 34″ x 26″. Only 69 lbs, allows one person to transport and set up tile saw. Removeable cutting cart for easy cleaning of tile saw.

 

Neiko 10353A 7″ Wet Ceramic Tile Saw with Stand, Blade and Laser Guide - Table has a built in ruler for accurate cutting and precise placement of the cutting guides. Make rip and diagonal cuts in a wide variety of materials including ceramic, slate, marble, granite and porcelain. 7-inch wet ceramic tile saw with stand, blade and laser guide, the saw comes with everything you will need including tile blade, supercalifragilisticexpialidocious, pump and stand. Laser guide system indicates the cut line for reliable cuts every time accepts 7″ blades with either 7/8″ or 5/8″ arbor holes. Table dimensions 14″ x 11″ cutting table pivots up for easy cleaning.

 

DeWALT D24000 / D24000S Wet Tile Saw (4 Pack) Replacement Brush # 5140024-30-4pk - Genuine oem replacement part new, oem bulk packaged please refer to list below for compatibility compatible with the following models dewalt d24000 type 1 wet tile saw, d24000s type 1 wet tile saw, d24000 type 2 wet tile saw. Includes (4), brush # 5140024-30 works with dewalt wet tile saw.

 

[US Stock] Kissemoj 27″ Wet Tile Saw Brick Paver Saw Wet Cut Laser Guide with tray stands 2.5hp motor - Includes abs water tub instruction /operators manual. Ul approved 25hp moter 120v 60hz 15amp. Laser guide for precise straights cuts. 3450 rpm 24 straight cutting capacity (27” max) 18” diagonal cuts 35” depth cuts. Includes angle fence straight fence miter fence.

 

RIDGID 7″ Portable Job Site Wet Tile Saw 6.5 Amp Induction Motor Power - Ridgid continues to provide best-in-class features on this table-top tile saw. The fence is simply the best on the market. It also extends forward. The t-square design sets up securely for repeatable cuts and slides effortlessly when adjustments are needed.

 

QEP 8 in. Diamond Blade for Wet Tile Saws - 875 to. Continuous rim diamond blade provides accurate cutting with minimal chipping. 56 in. Designed for wet cutting and long lasting performance. The blade is specifically engineered for cutting ceramic tile. 7640 maximum rpm, arbor size of 0. The qep 6-8001q 8 in.

 

TruePower 01-0856 Bench Top Wet Cutting Tile / Marble Saw / Cutting Machine with Blade, 7-Inch - 45 degree bevels 3565 rpm (no load) 15-3/4″ x 16-1/2″ table size. Csa/us listed 120 volt, 5 amp, ac motor 5/8″ arbor comes with one 7″ diamond cutting saw blade. Includes the instruction manual and tools for changing the blade. 1″ maximum cutting thickness 12″ maximum cutting width.

 

SKIL 3540-01 Wet Tile Saw, 7″ - 3540-01 7-inch wet tile saw. Adjustable rip fence with miter gauge, for accurate straight and miter cuts. Bevel cuts tile from 0 to 45 degrees, flexibility for different cut types. Blade cooling water reservoir, keeps blade cool and minimizes dust and debris.

 

Lackmond Beast 7″ Rear Water Tray fits Beast 7″ Wet Tile Saw BEAST7RWT - Our new beast 7″ wet tile saw is capable of performing a diagonal cut on a 18″ x 18″ tile and can execute a 24″ rip cut.  Equipped with a powerful 13 amp motor, our 7″ tile saw is comparable to most 10″ tile saws on the market. Optional side table extensions and side water trays are available upon request. The beast-7 comes with an innovative snake pipe water nozzle which allows for precise water control and placement while minimizing overspray. Our direct drive motor rotates to ensure accurate 22. The plunge cut feature makes it easy to execute v-cap cuts, cut-outs for wall sockets and much more. The durable steel pipe saw frame is constructed to withstand the toughest conditions. 5⁰ and 45⁰ bevel cuts.

 

DEWALT D24000S Heavy-Duty 10-inch Wet Tile Saw with Stand - Cantilevering rail cart system allows for 24-inch ripping capacity and 18-inch tile on diagonal. 45 or 225 degree miter feature for quick angled cuts with dual water nozzles. Weighing only 69 pounds, one person can transport and set up. Plunge feature allows user to make quick plunge cuts for electrical outlets and a/c registers. This product ships in two boxes and includes the d24000 saw and the d24001 stand.

 

Imer Combicut 250VA Tile Wet Tile Saw - Combi 250va is imer’s bread and butter 10″ tile saw. The 72 lb. This improves accuracy, a feature this saw was known for already this allows very accurate chip free cutting, as grout joints and slab look installation sare more and more common. 75 hp, high torque motor means this saw cuts even faster than it’s predecessor. 75 hp class-leading motor. The feet on the stand are rubber so the stand won’t slip on or scratch the floor. For additional accuracy, the 250va includes a laser guide. This saw sets the standard for overhead rail saws for cutting tile and stone on the jobsite. This makes the saw extremely easy to clean just spray with wd-40 and wipe clean. For these larger tiles, the included extension table makes cutting easier and more convenient. It includes the new imer 1. Aircraft quality cast aluminum materials make for a rigid and light weight saw which will maintain its finish for years to come. The new 1. Sealed bushings ensure plunge cuts are smooth and precise. Comes with blade, stand and accessory side table.

 

MK Diamond TX-4 1-3/4 HP, 10″ Wet Tile Saw - (39kg) lxwxh 44″ x 25″ x 20″ lxwxh (mm) 1118 x 635 x 508 shipping method ups / fed-ex accessories included 10″ wet cutting diamond blade submersible water pump rip guide with protractor side & rear water trays side table. The water distribution system provides a controllable, even flow to both sides of the blade. One-year limited warranty. The tx-4tm features an innovative maintenance free guide bar system that eliminates the need for regular lubrication. The tilting head allows 22. Tx-4 features large, aluminum cutting table with non-slip rubber surface built-in fully adjustable miter system for precise 22. 5 and 45 degree miter cuts. 5º and 45º angle cuts water distribution system provides a controllable, even flow to both sides of the blade variable height cutting head allows for plunge cutting maintenance free guide bar system eliminates the need for regular lubrication hinged blade guard for easy blade changes and maintenance inspection detachable side water containment tray slides with the table detachable rear tray for water containment air flow module protects the motor from spray during operation the side extension table allows greater support of larger materials during cutting table lock makes for easy transportation 10″ wet cutting continuous rim blade included one-year limited warranty tx-4 171231 voltage 120v horse power 1-3/4 hp motor rpm 3,500 blade capacity 10″ (254mm) arbor size 1″ (25mm) depth of cut 3-1/2″ (89mm) depth of cut at 45° 2-3/8″ (60mm) length of cut 24″ (610mm) diagonally cuts 18″ tile (457mm) weight 85 lbs.

 

DEWALT D24000 1.5-Horsepower 10-Inch Wet Tile Saw - Dual water nozzles can be adjusted for optimal water placement on blade in order to minimize over-spray and mist. Huge cutting capacity, 26″ rip and 18 3/8″ diagonally. Plunge feature allows the user to make quick plunge cuts for electrical outlets and a/c registers. Only 69 pounds, allowing one person to transport it and set it up. Able has rubber top to prevent sliding and slipping.

 

DeWALT D24000 / D24000S Wet Tile Saw Replacement Brush # 5140024-30 - Genuine oem replacement part new, oem bulk packaged please refer to list below for compatibility compatible with the following models dewalt d24000 type 1 wet tile saw, d24000s type 1 wet tile saw, d24000 type 2 wet tile saw. Includes (1), brush # 5140024-30 works with dewalt wet tile saw.

 

Ridgid ZRR4030 7 in. Job-Site Wet Tile Saw with Laser (Certified Refurbished) - Oversized-cut capacity provides 24 in rip, 18 in diagonal and 2 1/4 in depth. This certified refurbished product is tested & certified by ridgid to look and work like-new the product includes all original accessories, and is backed by a 1 year warranty. Full coverage splash-guard captures water from the cutting wheel to minimize overspray. Exactline adjustable laser alignment system assists operator in accurately aligning cutting wheel with cut-line. Miter guide makes precision straight and miter cuts from 0 to 45 degrees for both sides.

 

Factory-Reconditioned Skil 3540-01-RT 7-Inch 4.2 Amp Wet Tile Saw - Bevel cuts tile from 0 to 45 degrees, flexibility for different cut types. Stainless steel table top, resistant to corrosion. Adjustable rip fence with miter gauge, for accurate straight and miter cuts. Blade cooling water reservoir, keeps blade cool and minimizes dust and debris.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.