Best 21 Lag Screws

 

(200) 1/4-10×1-1/2 Hex Flange Lag Screws Grade 2 Galvanized - Threads lag threads, partial thread. Diameter/pitch 1/4-10″ length under head 1-1/2″. Finish hot dip galvanized. Wrench size 3/8″. Material grade 2.

 

Spax 4581020701005 1/4 x 4″ T-Star Drive Washer Head Yellow Zinc Powerlag Screw (50 Pieces per Box) - Heat treated grade 5 durability subjecting the screw to heat treating gives greater strength and reduces breakage. The yellow zinc coating protects the fastener for interior use so your project will last. The trend setting low profile built-on washer head design offers a contemporary and sleek finished installation excellent draw down strength without the need for a separate washer delivers superior clamping ability and a easier installation. T-star plus head provides superior bit engagement better bit engagement means quicker installation with less effort. Check out our threads our patented thread technology allows the screw to be driven faster, is easier to install, and reduces splitting in wood let spax take some of the hassle out of your next project.

 

National Mfg. N220665 1/4″ x 3-3/4″ Lag Screw Eye Bolt (Pack of 10) - Along with zinc-plated, there is a strong contingent of solid brass and stainless steel screw eyes available. Zinc plating offers corrosion resistance for all of your functional hardware needs. Providing latching and fastening options for all of your indoor and outdoor uses. An industry-leading set of screw eyes in a host of sizes are offered in zinc-plated with proprietary weather guard, which has a three times higher corrosions resistance than the competition. Whether for home, farm, builder or industrial customers, national has all the right hardware in the sizes and finishes you need. With over a century of service national is committed to maintaining the highest level of product quality, innovation and manufacturing technology.

 

The Hillman Group 230015 Hex Lag Screw, 1/4-Inch X 2-Inch, Zinc, 100-Pack - Hex lag screws are used for directly fastening into wood surfaces. They are used with a lag shield and lag screws can be used in masonry applications. The hex head is six-sided and ideal for easy driving and quick installation. The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection. .

 

The Hillman Group 230051 Hex Lag Screw, 5/16-Inch X 2-Inch, Zinc, 100-Pack - . The hex head is six-sided and ideal for easy driving and quick installation. They are used with a lag shield and lag screws can be used in masonry applications. The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection. Hex lag screws are used for directly fastening into wood surfaces.

 

(25) 3/4×3″ Hex Lag Screws – Hot Dip Galvanized - Galvanized. 3/4×3″. Hex head. Hex lag screws. Lag bolt.

 

Stainless 5/16 x 1″ Hex Lag Screw (1″ To 5″ Lengths Available in Listing), 18-8 Stainless Steel, 25 pieces (5/16 x 1″) - Pack of 25. Can also be used in conjunction with lag shield anchors to secure to concrete. Very good corrosion resistance. . 5/16 hex lag screw, 18-8 stainless steel. Lag screws are commonly used to join items to lumber or wood floors. These are good for applications where they will be used outside. Very good for constructing decks.

 

The Hillman Group 230021 Hex Lag Screw, 1/4-Inch X 3-Inch, Zinc, 100-Pack - Hex lag screws are used for directly fastening into wood surfaces. The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection. . They are used with a lag shield and lag screws can be used in masonry applications. The hex head is six-sided and ideal for easy driving and quick installation.

 

The Hillman Group 230107 Hex Lag Screw, 3/8-Inch X 6-Inch, Zinc, 50-Pack - Hex lag screws are used for directly fastening into wood surfaces. The hex head is six-sided and ideal for easy driving and quick installation. They are used with a lag shield and lag screws can be used in masonry applications. The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection.

 

The Hillman Group 832038 5/16 x 2-1/2-Inch Stainless Steel Hex Lag Screw, 25-Pack - The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection. The hex head is six-sided and ideal for easy driving and quick installation. Hex lag screws are used for directly fastening into wood surfaces. They are used with a lag shield and lag screws can be used in masonry applications.

 

Stanley National Hardware 2150BC 3/8″ x 8″ Zinc Plated Lag Screw Eye - Providing latching and fastening options for all of your indoor and outdoor uses. Zinc plating offers corrosion resistance for all of your functional hardware needs. Along with zinc-plated, there is a strong contingent of solid brass and stainless steel screw eyes available. An industry-leading set of screw eyes in a host of sizes are offered in zinc-plated with proprietary weather guard, which has a three times higher corrosions resistance than the competition. Whether for home, farm, builder or industrial customers, national has all the right hardware in the sizes and finishes you need. With over a century of service national is committed to maintaining the highest level of product quality, innovation and manufacturing technology.

 

Panorama Lag Screw Hand-Crimp Swage Stud for 1/8″ Cable Railing Stainless Steel T316 Marine Grade (Lot of 10) - Save $10 on these terminals when you purchase 1 or more reels of 1×19 1/8″ stainless steel cable by panorama cable & hardware. These high-quality stainless steel fittings surface mount a traditional diy cable railing into wood. Swage lag screw for 1/8″ cable hand swage stainless steel t316 marine grade. T316 marine grade stainless steel for maximum durability, strength and weather protection. Overall length = 3-5/8″, thread length = 1-1/2″, thread diameter = 1/4″, pilot hole size = 1/8″.

 

The Hillman Group 230045 Hex Lag Screw, 5/16-Inch X 1-1/2-Inch, Zinc, 100-Pack - Hex lag screws are used for directly fastening into wood surfaces. The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection. The hex head is six-sided and ideal for easy driving and quick installation. They are used with a lag shield and lag screws can be used in masonry applications. .

 

#14 x 1″ Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws – Modified Truss Washer Head -100 COUNT - Torx/star drive wood screw head provides twice the torque of phillips or square drive screw heads. Quality wood screw thread require less torque to drive the screw & provide maximum holding power. Type 17 notched extra sharp wood screw point reduces the need for pre-drilling in even hard woods. High performance exterior coated star/torx drive wood screws (100 lag screw count) easy install torx. Modified truss (washer) head provides high compression forces & neat and finished appearance.

 

The Hillman Group 230060 Hex Lag Screw, 5/16-Inch X 3-1/2-Inch, Zinc, 50-Pack - They are used with a lag shield and lag screws can be used in masonry applications. Hex lag screws are used for directly fastening into wood surfaces. The hex head is six-sided and ideal for easy driving and quick installation. The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection.

 

The Hillman Group 230089 Hex Lag Screw, 3/8-Inch X 3-Inch, Zinc, 50-Pack - The hex head is six-sided and ideal for easy driving and quick installation. The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection. They are used with a lag shield and lag screws can be used in masonry applications. . Hex lag screws are used for directly fastening into wood surfaces.

 

The Hillman Group 230018 Hex Lag Screw, 1/4-Inch X 2-1/2-Inch, Zinc, 100-Pack - Hex lag screws are used for directly fastening into wood surfaces. The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection. The hex head is six-sided and ideal for easy driving and quick installation. They are used with a lag shield and lag screws can be used in masonry applications.

 

The Hillman Group 230086 Hex Lag Screw, 3/8-Inch X 2-1/2-Inch, Zinc, 50-Pack - Hex lag screws are used for directly fastening into wood surfaces. The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection. The hex head is six-sided and ideal for easy driving and quick installation. They are used with a lag shield and lag screws can be used in masonry applications.

 

The Hillman Group 47867 1/4-Inch x 2-Inch Star Drive Construction Lag Screw with Truss Head 1000 Hour Bronze Ceramic Coat, 50-Pack - Chances for splitting wood are greatly reduced by the patented cross-cut threads and the wood biting cut point. . This products has features that are both impressive and unique. These two features combine to prevent wood splitting by grinding wood and removing fibers from the hole. Topping the list is the new “star drive” technology which virtually eliminates campout for a smooth, effortless drive every time.

 

Hard-to-Find Fastener 014973455590 Hex Lag Screws (8 Piece), 3/8 x 4″ - We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. We also sell coated and stainless products for additional rust resistance. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish.

 

ToolPro 3″ Eye Lag Screws (Wood Use) 100 Pack - They understand that quality is your first concern when shopping for tools that will be subjected to the heavy demands of construction professionals, so all tools are field tested to ensure they are “jobsite ready”. Eye lag screws screw into wood ceiling joists to attach hanger wire for suspended ceilings. About the manufacturer toolpro produces quality tools designed specifically for the professional contractor and installer. Toolpro’s focus is on innovation, quality and value, a focus that is readily apparent when you use these tools. Pre-drilling is recommended for the strongest attachment. Simply the best choice for installers and finishers in the drywall, eifs, stucco and acoustical trades. An eye lag screw is fashioned with an eye for threading the hanger wire and a lag thread on the other end for securing in the wood. 3 in.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.