Best 22 Bi Metal Bandsaw Blades

 

Woodstock D3538 93-Inch Bi-Metal Bandsaw Blade, 3/4 by 8-12 - 93-inch long. High carbon steel. 003-inch thick. 8-12 variable pitch tpi. 3/4-inch wide.

 

Imachinist S56781214 M42 Bi-metal Bandsaw Blades 56-7/8″ X 1/2″ X 14TPI Metal Cutting - 2. Sharpsaw new bi-metal band saw blade length 56-7/8″ width 1/2″ thickness 0. 025″ teeth 14tpi package 1 piece 56-7/8″ x 1/2″ x 14tpi band saw blade suitable cutting ferrous and non-ferrous metal shippment china post (usps-first class) shipping time 7-20days (usually), 21-45 (sometimes) after-sales service 1. If you have any question, please feel free to contact me here before open a a-to-z claims or leave a negative feedback. If you are satisfied with our products, it will be highly appreciated if you could leave us a positive feedback and review on amazon.

 

Magnate M59.5M14V14 M-42 Bi-metal Bandsaw Blade, 59-1/2″ Long – 1/4″ Width; 14-18 Variable Tooth - Tempered alloy backer results in longer life for contour cutting. Measures 90-inches length by 1/2-inches width by 0025-inches thick. Bi-metal construction means longer life and lower cost per cut than carbon blades. Designed for constant feed and pressure machines, user friendly blade. Wood or metal cutting 1/4″ width 14-18 variable tooth 0025″ thickness.

 

Magnate M82M14V10 M-42 Bi-metal Bandsaw Blade, 82″ Long – 1/4″ Width; 10-14 Variable Tooth - Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Bi-metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, i. 10 inch, 6′ 10″ ) bandsaw blades suit the following models grizzly g0613 delta 12″ 28-190, 16″ 28-560 (three wheeler) wilton zip miter if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 2, if the owner’s manual is not available, refer to previous invoices. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 20, 24 variable to cut 1/16″ to 1/4″ thick material, 14, 18 variable to cut 1/8″ to 3/8″ thick material, 10, 14 variable to cut 3/16″ to 7/16″ thick material, 8, 12 variable to cut 1/4″ to 1/2″ thick material, 6, 10 variable or 6 hook to cut 5/16″ to 5/8″ thick material, 5, 8 variable or 6 hook to cut 3/8″ to 1″ thick material, 4, 6 variable or 6 hook to cut 1/2″ to 2″ thick material, 3, 4 variable or 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 82 inch ( 6 ft. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. Bi-metal bandsaw blades are also most commonly used for metalcutting, i. Steel). Oak, maple, walnut or cherry. . The picture depicted represents one blade the pricing is for one blade/package. Carbon steels, light alloy steels, mold steels, and tool steels.

 

Magnate M97M12V6 M-42 Bi-metal Bandsaw Blade, 97″ Long – 1/2″ Width; 6-10 Variable Tooth - 2, if the owner’s manual is not available, refer to previous invoices. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 3. 1 inch, 8′ 1″ ) bandsaw blades suit the following models jet hbs-814gh (metalcutting) grizzly 8144z (94-1/4 to 98-1/4 metalcutting) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. The picture depicted represents one blade the pricing is for one blade/package. E. E. Steel). Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Bi-metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, i. Oak, maple, walnut or cherry. Bi-metal bandsaw blades are also most commonly used for metalcutting, i. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 20, 24 variable to cut 1/16″ to 1/4″ thick material, 14, 18 variable to cut 1/8″ to 3/8″ thick material, 10, 14 variable to cut 3/16″ to 7/16″ thick material, 8, 12 variable to cut 1/4″ to 1/2″ thick material, 6, 10 variable or 6 hook to cut 5/16″ to 5/8″ thick material, 5, 8 variable or 6 hook to cut 3/8″ to 1″ thick material, 4, 6 variable or 6 hook to cut 1/2″ to 2″ thick material, 3, 4 variable or 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 97 inch ( 8 ft. Carbon steels, light alloy steels, mold steels, and tool steels.

 

Magnate M70.5M14V14 M-42 Bi-metal Bandsaw Blade, 70-1/2″ Long – 1/4″ Width; 14-18 Variable Tooth - Carbon steels, light alloy steels, mold steels, and tool steels. 2, if the owner’s manual is not available, refer to previous invoices. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. Bi-metal bandsaw blades are also most commonly used for metalcutting, i. E. Steel). The picture depicted represents one blade the pricing is for one blade/package. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 20, 24 variable to cut 1/16″ to 1/4″ thick material, 14, 18 variable to cut 1/8″ to 3/8″ thick material, 10, 14 variable to cut 3/16″ to 7/16″ thick material, 8, 12 variable to cut 1/4″ to 1/2″ thick material, 6, 10 variable or 6 hook to cut 5/16″ to 5/8″ thick material, 5, 8 variable or 6 hook to cut 3/8″ to 1″ thick material, 4, 6 variable or 6 hook to cut 1/2″ to 2″ thick material, 3, 4 variable or 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Oak, maple, walnut or cherry. 3, c. Bi-metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, i.

 

Woodstock D3537 93-Inch Bi-Metal Bandsaw Blade, 3/4 by 6-10 - 6-10 variable pitch tpi. 003-inch thick. 3/4-inch wide. High carbon steel. 93-inch long.

 

Magnate M82M34V6 M-42 Bi-metal Bandsaw Blade, 82″ Long – 3/4″ Width; 6-10 Variable Tooth - Matrix ii high speed steel teeth with 8% cobalt. Wood or metal cutting 1/2″ width 10-14 variable tooth 0025″ thickness. For cutting stock 5/32″ to 5/16″ thick. Limited warranty. Wood or metal cutting 1/2″ width 8-12 variable tooth 0025″ thickness. For use with portable band saws using 44-7/8″ x 1/2″ x 020″ blades. The product is easy to use. Wood or metal cutting 3/4″ width 6-10 variable tooth 0035″ thickness.

 

Magnate M97M12V14 M-42 Bi-metal Bandsaw Blade, 97″ Long – 1/2″ Width; 14-18 Variable Tooth - Wood or metal cutting 3/4″ width 18 wavy tooth 0035″ thickness. Wood or metal cutting 3/4″ width 6-10 variable tooth 0035″ thickness. Wood or metal cutting 1/2″ width 14-18 variable tooth 0025″ thickness. Wood or metal cutting 3/8″ width 14-18 variable tooth 0025″ thickness. Wood or metal cutting 3/8″ width 10-14 variable tooth 0025″ thickness. Limited warranty. For use with portable band saws using 44-7/8″ x 1/2″ x 020″ blades. Matrix ii high speed steel teeth with 8% cobalt.

 

Magnate M93.5M14V14 M-42 Bi-metal Bandsaw Blade, 93-1/2″ Long – 1/4″ Width; 14-18 Variable Tooth - Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Carbon steels, light alloy steels, mold steels, and tool steels. Bi-metal bandsaw blades are also most commonly used for metalcutting, i. E. E. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 20, 24 variable to cut 1/16″ to 1/4″ thick material, 14, 18 variable to cut 1/8″ to 3/8″ thick material, 10, 14 variable to cut 3/16″ to 7/16″ thick material, 8, 12 variable to cut 1/4″ to 1/2″ thick material, 6, 10 variable or 6 hook to cut 5/16″ to 5/8″ thick material, 5, 8 variable or 6 hook to cut 3/8″ to 1″ thick material, 4, 6 variable or 6 hook to cut 1/2″ to 2″ thick material, 3, 4 variable or 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 93-1/2 inch ( 7 ft. Steel). Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Oak, maple, walnut or cherry. 9-1/2 inch, 7′ 9-1/2″ ) bandsaw blades suit the following models craftsman professional 7 x 12 delta 28-203, 28-243, 28-245, 28-283, 28-303 grizzly g1019, g0580x g0555x (92-1/2″ to 93-1/2″) general international 90-125 m1 jet jwbs-14dx, jwbs-14cs,jwbs-14os jbs14-mw, jbs14-14cs, jbs14-140s chicago industrial 14″ reliant 14″ central machinery 00580-obme elephant 14″ rikon 10-315. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Bi-metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, i. The picture depicted represents one blade the pricing is for one blade/package.

 

Steelex D3625 Bi-Metal Bandsaw Blade, 129-3/8-Inch by 1-Inch by 6-10 TPI-Variable Pitch - Measure 129-3/8 by 1 inches. 6-10vp tpi. 035-inch thick. Made from high carbon steel.

 

Magnate M67.5M38V14 M-42 Bi-metal Bandsaw Blade, 67-1/2″ Long – 3/8″ Width; 14-18 Variable Tooth - Wood or metal cutting 1/2″ width 8-12 variable tooth 0025″ thickness. Wood or metal cutting 3/8″ width 14-18 variable tooth 0025″ thickness. For use with portable band saws using 44-7/8″ x 1/2″ x 020″ blades. The product is easy to use. Limited warranty. Wood or metal cutting 3/4″ width 6-10 variable tooth 0035″ thickness. Matrix ii high speed steel teeth with 8% cobalt. Wood or metal cutting 1/2″ width 10-14 variable tooth 0025″ thickness.

 

Magnate M99.75M14V14 M-42 Bi-metal Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 14-18 Variable Tooth - Measures 174-inches length by 1/2-inches width by 0025-inches thick. M42 high-speed steel edge provides high wear resistance for longer life. Wood or metal cutting 1/4″ width 14-18 variable tooth 0025″ thickness. Tempered alloy backer results in longer life for contour cutting. Bi-metal construction means longer life and lower cost per cut than carbon blades.

 

Magnate M80M38T10 M-42 Bi-metal Bandsaw Blade, 80″ Long – 3/8″ Width; 10 Tooth; 0.025″ Thickness - Limited warranty. Matrix ii high speed steel teeth with 8% cobalt. The product is manufactured in united states. 14 tpi, bi-metal construction. The product is durable. For use with portable band saws using 44-7/8″ x 1/2″ x 020″ blades. The product is easy to use. Wood or metal cutting 3/8″ width 10 tooth 0025″ thickness.

 

Magnate M133M12V14 M-42 Bi-metal Bandsaw Blades, 133″ Long – 1/2″ Width; 14-18 Variable Tooth - The picture depicted represents one blade the pricing is for one blade/package. 1 inch, 11′ 1″ ) bandsaw blades suit the following models jet jwbs-18 18″ dayton 2ac29 18″ rikon 10-336 grizzly g8146z (133-3/4″ to 136-1/4″) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 2, if the owner’s manual is not available, refer to previous. Steel). Bi-metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, i. Oak, maple, walnut or cherry. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Bi-metal bandsaw blades are also most commonly used for metalcutting, i. E. Carbon steels, light alloy steels, mold steels, and tool steels. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 20, 24 variable to cut 1/16″ to 1/4″ thick material, 14, 18 variable to cut 1/8″ to 3/8″ thick material, 10, 14 variable to cut 3/16″ to 7/16″ thick material, 8, 12 variable to cut 1/4″ to 1/2″ thick material, 6, 10 variable or 6 hook to cut 5/16″ to 5/8″ thick material, 5, 8 variable or 6 hook to cut 3/8″ to 1″ thick material, 4, 6 variable or 6 hook to cut 1/2″ to 2″ thick material, 3, 4 variable or 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 133 inch ( 11 ft.

 

Magnate M112M34V8 M-42 Bi-metal Bandsaw Blade, 112″ Long – 3/4″ Width; 8-12 Variable Tooth - The picture depicted represents one blade the pricing is for one blade/package. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. This method will provide the most possible accurate length. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 20, 24 variable to cut 1/16″ to 1/4″ thick material, 14, 18 variable to cut 1/8″ to 3/8″ thick material, 10, 14 variable to cut 3/16″ to 7/16″ thick material, 8, 12 variable to cut 1/4″ to 1/2″ thick material, 6, 10 variable or 6 hook to cut 5/16″ to 5/8″ thick material, 5, 8 variable or 6 hook to cut 3/8″ to 1″ thick material, 4, 6 variable or 6 hook to cut 1/2″ to 2″ thick material, 3, 4 variable or 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, 112 inch ( 9 ft. 2, if the owner’s manual is not available, refer to previous invoices. Oak, maple, walnut or cherry. Steel). Bi-metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, i. 4, upon re. E. E. Carbon steels, light alloy steels, mold steels, and tool steels. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Bi-metal bandsaw blades are also most commonly used for metalcutting, i. 4 inch, 9′ 4″ ) bandsaw blades suit the following models laguna lt14 sel if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced.

 

Magnate M92.5M38T10 M-42 Bi-metal Bandsaw Blade, 92-1/2″ Long – 3/8″ Width; 10 Tooth - E. Carbon steels, light alloy steels, mold steels, and tool steels. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Bi-metal bandsaw blades are also most commonly used for metalcutting, i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Oak, maple, walnut or cherry. 8-1/2 inch, 7′ 8-1/2″ ) bandsaw blades suit the following models jet j-8203k powerline mark 1 shopcraft 28-283f mit 5125 american industrial amt 4113 enco 505-1372 (models 8201, 8203, 8201vs and 8203vs), 199-9013, 199-9011, 199-9001 dayton 3z981 central machinery 32206-ocea, 32208-ocea, 5687-ocea, 2146-3bmf, 00580-ocea nu-mark 14″ united 14″ wilton tradesman 8201, 8203, 8201vs, 820. E. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 20, 24 variable to cut 1/16″ to 1/4″ thick material, 14, 18 variable to cut 1/8″ to 3/8″ thick material, 10, 14 variable to cut 3/16″ to 7/16″ thick material, 8, 12 variable to cut 1/4″ to 1/2″ thick material, 6, 10 variable or 6 hook to cut 5/16″ to 5/8″ thick material, 5, 8 variable or 6 hook to cut 3/8″ to 1″ thick material, 4, 6 variable or 6 hook to cut 1/2″ to 2″ thick material, 3, 4 variable or 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92-1/2 inch ( 7 ft. Steel). Bi-metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, i.

 

Magnate M137M14V10 M-42 Bi-metal Bandsaw Blades, 137″ Long – 1/4″ Width; 10-14 Variable Tooth - Bi-metal construction means longer life and lower cost per cut than carbon blades. Tempered alloy backer results in longer life for contour cutting. Wood or metal cutting 1/4″ width 10-14 variable tooth 0025″ thickness. M42 high-speed steel edge provides high wear resistance for longer life. Designed for constant feed and pressure machines, user friendly blade.

 

Magnate M125M38T10 M-42 Bi-metal Bandsaw Blade, 125″ Long – 3/8″ Width; 10 Tooth; 0.025″ Thickness - 2, if the owner’s manual is not available, refer to previous invoices. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 20, 24 variable to cut 1/16″ to 1/4″ thick material, 14, 18 variable to cut 1/8″ to 3/8″ thick material, 10, 14 variable to cut 3/16″ to 7/16″ thick material, 8, 12 variable to cut 1/4″ to 1/2″ thick material, 6, 10 variable or 6 hook to cut 5/16″ to 5/8″ thick material, 5, 8 variable or 6 hook to cut 3/8″ to 1″ thick material, 4, 6 variable or 6 hook to cut 1/2″ to 2″ thick material, 3, 4 variable or 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 125 inch ( 10 ft. Bi-metal bandsaw blades are also most commonly used for metalcutting, i. Steel). Carbon steels, light alloy steels, mold steels, and tool steels. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Bi-metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, i. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. The picture depicted represents one blade the pricing is for one blade/package. 5 inch, 10′ 5″ ) bandsaw blades suit the following models laguna lt14 3000 series, lt14 suv, lt14 x14 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. 3, cut your old bandsaw blade s. Oak, maple, walnut or cherry.

 

Magnate M137M1H3 M-42 Bi-metal Bandsaw Blades, 137″ Long – 1″ Width; 3 Hook Tooth; 0.035″ Thickness - Measures 93-inches length by 3/4-inches width by 0035-inches thick. Proprietary heat treat minimizes tooth chipping and improves blade flex life. 8 percent cobalt high-speed wire increases blade durability. Plastic capping reduces tooth tip damage during transit and handling. Wood or metal cutting 1″ width 3 hook tooth 0035″ thickness.

 

Magnate M82M34V8 M-42 Bi-metal Bandsaw Blade, 82″ Long – 3/4″ Width; 8-12 Variable Tooth - Bi-metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, i. Carbon steels, light alloy steels, mold steels, and tool steels. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. E. Steel). Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Oak, maple, walnut or cherry. The picture depicted represents one blade the pricing is for one blade/package. Bi-metal bandsaw blades are also most commonly used for metalcutting, i. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 20, 24 variable to cut 1/16″ to 1/4″ thick material, 14, 18 variable to cut 1/8″ to 3/8″ thick material, 10, 14 variable to cut 3/16″ to 7/16″ thick material, 8, 12 variable to cut 1/4″ to 1/2″ thick material, 6, 10 variable or 6 hook to cut 5/16″ to 5/8″ thick material, 5, 8 variable or 6 hook to cut 3/8″ to 1″ thick material, 4, 6 variable or 6 hook to cut 1/2″ to 2″ thick material, 3, 4 variable or 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 82 inch ( 6 ft. 10 inch, 6′ 10″ ) bandsaw blades suit the following models grizzly g0613 delta 12″ 28-190, 16″ 28-560 (three wheeler) wilton zip miter if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 2, if the owner’s manual is not available, refer to previous invoices.

 

Magnate M70.5M14V10 M-42 Bi-metal Bandsaw Blade, 70-1/2″ Long – 1/4″ Width; 10-14 Variable Tooth - Oak, maple, walnut or cherry. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 20, 24 variable to cut 1/16″ to 1/4″ thick material, 14, 18 variable to cut 1/8″ to 3/8″ thick material, 10, 14 variable to cut 3/16″ to 7/16″ thick material, 8, 12 variable to cut 1/4″ to 1/2″ thick material, 6, 10 variable or 6 hook to cut 5/16″ to 5/8″ thick material, 5, 8 variable or 6 hook to cut 3/8″ to 1″ thick material, 4, 6 variable or 6 hook to cut 1/2″ to 2″ thick material, 3, 4 variable or 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. The picture depicted represents one blade the pricing is for one blade/package. Steel). Bi-metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, i. E. Bi-metal bandsaw blades are also most commonly used for metalcutting, i. 3, c. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 2, if the owner’s manual is not available, refer to previous invoices. Carbon steels, light alloy steels, mold steels, and tool steels. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.