Melin Tool CCMGS Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 1.5000″ Overall Length, 0.0750″ Cutting Diameter, 0.125″ Shank Diameter
- 4 flutes single end. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. 30 degrees helix angle.
YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, TiCN Monolayer Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 4″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter
- Suitable for high-performance machining on aluminum and other nonferrous materials. Extended-reach neck style provides access to recessed areas of the workpiece. 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than uncoated tools. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Niagara Cutter N45061 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.188″ Cut Diameter, 0.375″ Shank Diameter
- Double-end end mills have cutting edges on both ends for longer tool life. High-speed steel is compatible with a variety of materials. Four flutes produce a better finish than fewer flutes. Square nose end mills (also called square end) create sharp, unrounded cuts. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Niagara Cutter N46420 Carbide Square Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 39mm Overall Length, 3mm Cutting Diameter, 3.000mm Shank Diameter
- Aluminum titanium nitride (altin) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than tin, tialn, and ticn coatings. Square nose end mills (also called square end) create sharp, unrounded cuts. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Four flutes produce a better finish than fewer flutes. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Wokesi Pack of 3,4 6 8mm Blade Diameter,Extra Long,4Flutes,TiAlN Coated,Solid Tungsten steel,Square Nose End Mill,CNC Router Bits(4mm+6mm+8mm Long, HRC45)
- Contains 3pcs4mm4mmshank75mmoal,6mm6mmshank75mmoal,8mm8mmshank100mmoal. Package 1 pack of 3 pieces endmill cutter. High micro hardness,high abrasion resistance,good toughnesscan be high-speed processing. Suitable for process alloy,iron and steel under hrc45(hra73)high performance. Materialtungsten carbide,high quality tialn coating,getting long tool life.
Niagara Cutter N35160 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.5000″ Shank Diameter
- Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Square nose end mills (also called square end) create sharp, unrounded cuts. Titanium nitride (tin) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills. High-speed steel is compatible with a variety of materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Melin Tool ELMG-M-M Carbide Square Nose End Mill, Metric, TiCN Monolayer Finish, 30 Deg Helix, 3 Flutes, 51mm Overall Length, 5mm Cutting Diameter, 5mm Shank Diameter
- Titanium carbonitride coatings are harder and more wear-resistant than tin for improved tool life and faster cutting speeds. Small corner radius for added strength and smoother cutting action. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. 3 flute design for lighter finishing cuts. Round shanks allow use with a wide variety of toolholding systems.
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 5″ Overall Length, 0.625″ Cutting Diameter, 0.625″ Shank Diameter
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Suitable for high-performance machining and step milling on aluminum and other nonferrous materials. 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix. Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
Niagara Cutter N61647 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 4″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Square nose end mills (also called square end) create sharp, unrounded cuts. 45-degree helix provides the efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers the abrasion resistance required to machine aluminum and other nonferrous materials.
Niagara Cutter N46712 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Finishing Cut, Non-Center, 30-Degree, 6-Flute, 4″ OAL, 0.844″ Cut Diameter, 0.625″ Shank Diameter
- Square nose end mills (also called square end) create sharp, unrounded cuts. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Non-center-cutting design supports peripheral milling and finishing.
Niagara Cutter N40182 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing/Finishing Cut, 30-Degree, 4-Flute, 3.375″ OAL, 0.563″ Cut Diameter, 0.500″ Shank Diameter
- High-speed steel is compatible with a variety of materials. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Square nose end mills (also called square end) create sharp, unrounded cuts.
CGC Tools CEM18F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 1/8″ Diameter, 1/2″ LOC, 1-1/2″ OAL
- This weapon of mass production destroy any competition. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Usa, flat, 3 flute, 1/8” diameter, 1/2” length of cut, 1-1/2” overall length, ticn coating. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Extremely versatile in various materials, center cutting, solid sub-micron carbide.
Niagara Cutter N41120 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 2.875″ OAL, 0.375″ Cut Diameter, 0.375″ Shank Diameter
- H13a uncoated carbide grade provides a balance of hardness and toughness for resistance to wear and shock. Roughing (kr) and medium-machining (km) chipbreaker styles help prevent chip buildup at a range of cutting depths and feed rates. Positive single-sided insert with 7-degree clearance angle for light cutting forces and side clearance. Square shape offers edge strength and is suitable for roughing, facing, interrupted cuts, and large lead angles. Designed for turning operations, roughing to medium machining — on aluminum in average machining conditions.
CGC Tools CEM14F2 Primate Square Nose End Mill, 2 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL
- This weapon of mass production destroy any competition. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Usa, flat, 2 flute, 1/4” diameter, 3/4” length of cut, 2-1/2” overall length. Extremely versatile in various materials, center cutting, solid sub-micron carbide. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable.
Niagara Cutter N40321 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 4.125″ OAL, 1.000″ Cut Diameter, 0.750″ Shank Diameter
- Roughing (kr) and medium-machining (km) chipbreaker styles help prevent chip buildup at a range of cutting depths and feed rates. Square shape offers edge strength and is suitable for roughing, facing, interrupted cuts, and large lead angles. Designed for turning operations, roughing to medium machining — on aluminum in average machining conditions. H13a uncoated carbide grade provides a balance of hardness and toughness for resistance to wear and shock. Positive single-sided insert with 7-degree clearance angle for light cutting forces and side clearance.
Niagara Cutter N55808 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter
- Four flutes produce a better finish than fewer flutes. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Square nose end mills (also called square end) create sharp, unrounded cuts.
Niagara Cutter N61645 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter
- Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers the abrasion resistance required to machine aluminum and other nonferrous materials. 45-degree helix provides the efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Square nose end mills (also called square end) create sharp, unrounded cuts. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Niagara Cutter N39240 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 3″ OAL, 0.750″ Cut Diameter, 0.750″ Shank Diameter
- Square shape offers edge strength and is suitable for roughing, facing, interrupted cuts, and large lead angles. Roughing (kr) and medium-machining (km) chipbreaker styles help prevent chip buildup at a range of cutting depths and feed rates. H13a uncoated carbide grade provides a balance of hardness and toughness for resistance to wear and shock. Designed for turning operations, roughing to medium machining — on aluminum in average machining conditions. Positive single-sided insert with 7-degree clearance angle for light cutting forces and side clearance.
YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter
- Four flutes produce a better finish than fewer flutes. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic. Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
CGC Tools GMA14F3 Gorilla Silverback Carbide Square Nose End Mill for Aluminum, Flat End, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL
- Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Usa, silverback, flat, 3 flute, 1/4″ diameter, 3/4″ length of cut, 2-1/2″ overall length. Engineered to repel aluminum for roughing and finishing of non-ferrous materials, high velocity, high material removal rate. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish.
Melin Tool CC Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.3750″ Overall Length, 0.5313″ Cutting Diameter, 0.5″ Shank Diameter
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. 30 degree helix angle.
CGC Tools CEM14F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL
- This weapon of mass production destroy any competition. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Extremely versatile in various materials, center cutting, solid sub-micron carbide. Usa, flat, 3 flute, 1/4” diameter, 3/4” length of cut, 2-1/2” overall length, ticn coating.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
