Best 23 Cutter Cs

 

CRL Nozzle Cutter by C.R. Laurence - Use on all plastic cartridges to cut nozzle tip and threaded tip.

 

C.K T4358 12 Bolt Cutter by C.K - Compact cutters ideal for fencinghot drop forged chrome vanadium steel jawscompound action mechanism applies extreme cutting forcesuse for cutting round material and hard wiremeasures 6 mm diameter by 300 mm length.

 

C.K T3884 Ecotronic ESD Micro Reverse Cut Side Cutters by C.K - G. 05 inch (1,3 mm) diameter / 16awg. Lightweight precision pliers for fine micro-schneidanwendungen (e. Electronics and fine mechanics)sharp blades with precision-sharpened for flush cuttingfor cutting soft-free copper wires up to 0. Easy comfort with repeating return for workelectrostatically handles ableitwiderstand 10-dissipativesharp, precision ground cutting edges with an extra full flush cutspecial tool steel blade, hardened for long-term cutting performanceelecro-static discharging handles, dissipative 1contoured, dual component handle design for comfortable workinblack oxidised finish for corrosion resistance and reduced glare.

 

C.S. Osborne Grommet Cutter (No.500-2A) & Setter (No. 217 -2) Tool Kit MPN #13248-51616 - Size 2 grommets have a 7/16″ diameter hole when set in, 0890 ” out side diameter, and 0215″ length under flange osborne grommet dies are numbered to correspond with standard size grommets grommets not included . Grommet dies and cutters should be used with an osborne rawhide hammer or wooden mallet, not with a steel hammer we recommend csosborne & co no 395 rawhide hammers for this purpose mallet not included. Setter male sits flat on base for perfectly set plain grommets . Mpn #13248 & #51616 made in usa. This kit includes no 217-2 plain grommet setting die and no 500 -2a grommet hole cutter.

 

NT Cutter Blades for Heavy-Duty Circle Cutters and Mat Board Cutters, 10-Blade per Pack (BC-400P) - 9mm w x 20mm l x 1mm t. Cutting material foamboard, matboard, soft film, leather, thin rubber sheet, card stock, any other thin material. Packed in hanging plastic case. Made in japan. 10ea per pack. Blades for heavy duty circle cutters (c-2500p, c-3000gp, cl-100p) and mat board cutter (ol-7000gp). Made of high quality carbon tool steel.

 

C.K Classic T3703 Precision Pliers and Cutters (Set of 6) by C.K - About 142″ long, 25″ diameter for upper arm, 2″ for wrist. Ck classic t3703 precision pliers and cutters (set of 6). 1212-1-1/2 cs osborne foam cutters. High performance fabric, keeps you warm in cold temperatures, & keeps you cool in hotter temperatures. Uv protection over 99%.

 

C.K T3885 Ecotronic ESD Slim Side Cutters by C.K - Can be used anywhere that needs a quick trim. Ck t3885 ecotronic esd slim side cutters. Mini trimming shears are perfect for bonsai, pruning houseplants also very handy for the fisherman’s tackle box, sewing box, etc. Super handy, you’ll want to keep these in several places so that they’re always at hand for a quick snip. Precision ground and very sharp to preserve the fine edges, please don¡¯t use it to cut wire.

 

C.S. Osborne Grommet Cutter (No.500-4A) & Setter (No. 216 -4) Tool Kit -Size 4 MPN #13222-51620 - Grommet dies and cutters should be used with an osborne rawhide hammer or wooden mallet, not with a steel hammer we recommend csosborne & co no 395 rawhide hammers for this purpose mallet not included. Mpn #13222 & #51620 made in usa. This kit includes no 216 -4 plain grommet setting die and no 500 -4a grommet hole cutter. Setter male sits flat on base for perfectly set plain grommets . Size 4 grommets have a 1/2″ diameter hole when set in, 1062″ out side diameter, and 0374″ length under flange osborne grommet dies are numbered to correspond with standard size grommets grommets not included .

 

C.S. Osborne Grommet Cutter (No.500-1A) & Setter (No. 217 -1) Tool Kit MPN #13246-51614 - Grommet dies and cutters should be used with an osborne rawhide hammer or wooden mallet, not with a steel hammer we recommend csosborne & co no 395 rawhide hammers for this purpose mallet not included. Mpn #13246 & #51614 made in usa. Size 1 grommets have a 13/32″ diameter hole when set in, 0790 ” out side diameter, and 0205″ length under flange osborne grommet dies are numbered to correspond with standard size grommets grommets not included . This kit includes no 217-1 plain grommet setting die and no 500 -1a grommet hole cutter. Setter male sits flat on base for perfectly set plain grommets .

 

C.K T3750 145 Standard Side Cutter by C.K. - Induction hardened and precision ground cutting edgedrop forged chrome vanadium steel for strength and durabilitymat chrome plated for corrosion resistanceergonomic dual component handles offering the perfect balance of grip and comfort140 mm side cutter length.

 

NT Cutter Heavy-Duty Circle Cutter, 1-3/16 Inches 6-5/16 Inches Diameter, 1 Cutter (C-2500P) - Nt heavy duty circle cutter with sturdy non-slip circular grip of polycarbonate resin. Professional blades are made of high quality carbon tool steel and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention. This heavy-duty circle cutter includes (2) extra durable double-edged blade, bc-501. Good for diy projects, construction, industrial application. Ideal for day projects and installation/repair jobs for drywall, roofing and flooring on floor sheets, carpet and thin veneer as well as lighter materials such as wallpaper, cloth, etc. Hold the center grip firmly down and slowly turn grip in the direction of the cutting edge. Convenient built-in compartment to store spare blades. Also great for making pipe holes in carpet, rounding corners and other uses in construction. By turning the grip several times over the surface, you will have better results. Made in japan. Circle can range from 1-3/16″ ~ 6-5/16″ diameter. Do not try to cut with just one turn.

 

1212-3/4 C.S. OSBORNE FOAM CUTTERS - Extremely sharp carbonized cutting edge. For use in a drill press or with a hand held standard electric drill. Osborne no. Cuts up to 30 buttons at a time. 1212 foam cutter polished, high quality and sharpened with the best technique. For soft materials only.

 

NT Cutter Compass Circle Cutter, 13/16 Inches ~ 5-7/8 Inches diameter, 1 Cutter (C-400P) - Nt compass circle cutter for scrapbooking or other craft projects. Circle can range from 13/16″ ~ 5-7/8″ diameter. Made in japan. Simple-to-use circle cutter for paper is perfect for making crafts, models & other light-duty jobs. Compact small circle cutter will smoothly cut a 1 inch circle. This convenient little craft circle cutter comes with (5) 45 degree refill blades. These professional blades are made of high quality carbon tool steel and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention. Good for art & craft projects such as scrapbooking, etc.

 

NT Cutter 18mm Rotary Blades for Fabric Circle Cutter, 2-Blade/Pack, 1 Pack (BR-18P) - Made in japan. 2ea per pack. Dia 18mm x 03mm t. Cutting material cloth, felt, denim, lace, etc. Good for quilt making, applique, walnut button, scrapbooking, etc. Rotary blades for fabric circle cutter (c-2000p). Made of high quality carbon tool steel with chromium and tungsten added.

 

C.S. Osborne Grommet Cutter (No.500-00A) & Setter (No. 216 -00) Tool Kit -Size 00 MPN #13212-51610 - Size 00 grommets have a 3/16″ diameter hole when set in, 0460 ” out side diameter, and 0135″ length under flange osborne grommet dies are numbered to correspond with standard size grommets grommets not included . Grommet dies and cutters should be used with an osborne rawhide hammer or wooden mallet, not with a steel hammer we recommend csosborne & co no 395 rawhide hammers for this purpose mallet not included. This kit includes no 216 -00 plain grommet setting die and no 500 -00a grommet hole cutter. Setter male sits flat on base for perfectly set plain grommets . Mpn #13212 & #51610 made in usa.

 

C.K T4358 15 Bolt Cutter by C.K - Compact cutters ideal for fencinghot drop forged chrome vanadium steel jawscompound action mechanism applies extreme cutting forcesuse for cutting round material and hard wiremeasures 7 mm diameter by 380 mm length.

 

C.K T3888 Ecotronic ESD Relieved Side Cutters by C.K - Precision pliers for fine schneidanwendungensharp blades with precision-sharpened for flush cuttingfor cutting soft-free copper wires up to 14awg 0. 06 inch (1,6 mm) diameter / suitable for useeasy comfort with repeating return for workelectrostatically handles ableitwiderstand 10-dissipativesharp, precision ground cutting edges with an extra full flush cutspecial tool steel blade, hardened for long-term cutting performanceelecro-static discharging handles, dissipative 1contoured, dual component handle design for comfortable workinblack oxidised finish for corrosion resistance and reduced glare.

 

NT Cutter Circle Cutter, 11/16 Inches ~ 6-11/16 Inches diameter, 1 Cutter (C-1500) - Professional blades are made of high quality carbon tool steel and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention. Circle can range from 11/16″ ~ 6-11/16″ diameter. Made in japan. Skillfully constructed small circle cutter leaves no trace of a center pin mark and will smoothly cut a 1 inch circle. For even larger circles, use ce-700p to increase range to 6-1/4″ up to 15-3/4″ diameter, (extension beam, sold separately). Includes (6) 45 degree refill blades and a centering guide to assist in finding the center point. This convenient little craft circle cutter has two built in storage compartments to hold extra blades. Nt circle cutter for scrapbooking or other craft & artisanal projects. Simple-to-use circle cutter for paper is perfect for making crafts, models & other light-duty jobs. Good for hobby & craft projects, graphics, professional artists or installers.

 

NT Cutter Fabric Circle Cutter, 1-3/16 Inches ~ 8-11/16 Inches diameter, 1 Cutter (C-2000P) - Nt circle cutter with rotary blade makes a great fabric cutting tool. Rotary blade cuts without twisting fabric. Unique fabric circle cutter leaves no center pin mark. Made in japan. Circle can range from 1-3/16″ ~ 8-11/16″ diameter. Ideal for crafts and projects that involves cutting felt, denim, lace, soft film, etc. This circle cutter includes (1) extra durable rotary blade, br-18 and has a built in storage compartment to hold spare blades. Special rotary blade is made of premium quality chromium and tungsten added to carbon tool steel and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention. Do not try to cut with just one turn. Good for quilt making, applique, walnut button, scrapbooking, etc. Hold the center point firmly down and slowly turn end in the direction of the cutting edge. By turning the cutter several times over the surface, you will have better results.

 

C.S. Osborne Grommet Cutter (No.500-6A) & Setter (No. 217 -6) Tool Kit MPN #13256-51624 - Size 6 grommets have a 3/4″ diameter hole when set in, 1505″ out side diameter, and 0420″ length under flange osborne grommet dies are numbered to correspond with standard size grommets grommets not included . Mpn #13256 & #51624 made in usa. Setter male sits flat on base for perfectly set plain grommets . Grommet dies and cutters should be used with an osborne rawhide hammer or wooden mallet, not with a steel hammer we recommend csosborne & co no 395 rawhide hammers for this purpose mallet not included. This kit includes no 217-6 plain grommet setting die and no 500 -6a grommet hole cutter.

 

Ridgid 74700 468C 6-8 HINGE CUTTER–C - Operates where minimal cutter rotation is necessary due to lack of space. Equipped with 4 cutter wheels. Designed for rapid cutting of 2″ through 12″ steel pipe.

 

Mini Tubing Cutter -C- - Rotary blades for fabric circle cutter (c-2000p). Good for quilt making, applique, walnut button, scrapbooking, etc. Cutting material cloth, felt, denim, lace, etc. Dia 18mm x 03mm t. 2ea per pack. Made of high quality carbon tool steel with chromium and tungsten added. Made in japan.

 

C.R. LAURENCE PTC1903 CRL Replacement Roller and Housing for PTC Series Production T-Cutters by C.R. Laurence - Precision ground and very sharp to preserve the fine edges, please don¡¯t use it to cut wire. Can be used anywhere that needs a quick trim. Cr laurence ptc1903 crl replacement roller and housing for ptc series production t-cutters. Mini trimming shears are perfect for bonsai, pruning houseplants also very handy for the fisherman’s tackle box, sewing box, etc. Super handy, you’ll want to keep these in several places so that they’re always at hand for a quick snip.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.