Best 23 Mag Drills

 

Metabo MAG 28 LTX 252-Volt Cordless Magnetic Drill Press

Metabo MAG 28 LTX 25.2-Volt Cordless Magnetic Drill Press

Metabo MAG 28 LTX 25.2-Volt Cordless Magnetic Drill Press - The drill has a prism-shaped magnetic base that enables users to work on pipe as well, further increasing the flexibility of this drill throughout steel construction applications. 2-volt, 3. A permanent rare earth magnet, requiring no energy from the battery, allows the use of the mag drill in remote and previously inaccessible environments. 2-volt, 3. The tools magnetic stand has a maximum stroke of 6-5/16-inch. In addition, the mag 28 ltx is warranted for three-years under metabos industry-leading xxl warranty. The tool offers a maximum drilling depth of 2-inch. 0 ah li-ion battery pack charges rapidly in a 15 minute charger. A weldon 3/4 ” tool holder, ejector pin, chuck adaptor and geared chuck, chuck key, mt 2 drift key, safety strap, allen key and two 25. The mag 28 ltx features electronic thermal overload protection and jam protection to help ensure the longevity of the 25. 0 ah li-ion battery packs come standard with metabos mag 28 ltx. Metabos air-cooled charging technology cools the battery pack during charging to shorten the charging process by up to 30-percent. 2-volt li-ion battery to power the tool. The unique rare earth magnet offers up to 2,500-pound of holding force, which can be adjusted for precise positioning when drilling on vertical, horizontal and sloped surfaces. The 2-speed tool boasts 380 or 680 no load revolutions per minute and is designed with a dual-level, permanently lubricated gearbox for speed and torque optimization. This first-to-market cordless electromagnetic drill press can be used with annular cutters, spiral drills and countersinks, featuring a maximum drilling diameter of 1-1/4-inch with an annular cutter and 1/2-inch with a spiral drill. An integrated gravity coolant container with through-the-spindle coolant feed is also included. 2-volt motor. A safety cut-out protects the operators in the event a battery is inserted with the machine in the on position. The new mag 28 ltx utilizes a 25. The cordless tools 25.

 

Fein 3 Inch By 2 Inch Automatic Feed Mag Drill

Fein 3 Inch By 2 Inch Automatic Feed Mag Drill

Fein 3 Inch By 2 Inch Automatic Feed Mag Drill - Amps 1500 a. Holding force 4050 lb. Speed 110 rpm [min], 160 rpm [min], 350 rpm [min], 180 rpm [max], 260 rpm. Stroke length 5-11/16. Spindle travel 11-3/16.

 

Hougen HMD904 MAG DRILL - FABRICATORS KIT FRACTIONAL - 115V 0904105

Hougen HMD904 MAG DRILL – FABRICATOR’S KIT FRACTIONAL – 115V (0904105)

Hougen HMD904 MAG DRILL – FABRICATOR’S KIT FRACTIONAL – 115V (0904105) - Industry leading cycle times with both hss and tct cutters. Integrated cutter guard. Dual rail guide system provides extraordinary stiffness and maintenance-free operation. Hougen® heavy-duty magnetic drill press has a powerful high-torque motor and 2-speed gear box that. Large integrated coolant tank.

 

Hougen HMD904 MAG DRILL - COOLANT - 115V 0904102

Hougen HMD904 MAG DRILL – COOLANT – 115V (0904102)

Hougen HMD904 MAG DRILL – COOLANT – 115V (0904102) - Powerful, lightweight 33 lbs, magnetic strength 3370 lbs, 2 speed motor 450/300 rpm. Includes carrying case, hex keys, safety chain, external coolant bottle, safety guard, quick change arbor, removable handle, qx1234 drill/chuck adaptor. Quick change arbor allows for fast cutter change easily converts from annular cutters to twist drills with qx1234 drill/chuck adaptor. Cutter capacity 2-1/8″ diameter, 2″ depth of cut. Recommended for use with champion cutting tool rotobrute annular cutters.

 

Hougen HMD905 MAG DRILL - FABRICATORS KIT FRACTIONAL - 115V 0905105 by Hougen

Hougen HMD905 MAG DRILL – FABRICATOR’S KIT FRACTIONAL – 115V (0905105) by Hougen

Hougen HMD905 MAG DRILL – FABRICATOR’S KIT FRACTIONAL – 115V (0905105) by Hougen - Hougen hmd905 mag drill, fabricator’s kit fractional, 115v (0905105). Hougen® heavy-duty magnetic drill press has a powerful high-torque motor and 2-speed gear box that. Large integrated coolant tank. Integrated cutter guard. Industry leading cycle times with both hss and tct cutters.

 

Jancy JHM Series ShortSlugger Magnetic Base Drilling Unit 750W 2 Cutting Depth

Jancy JHM Series ShortSlugger Magnetic Base Drilling Unit, 750W, 2″ Cutting Depth

Jancy JHM Series ShortSlugger Magnetic Base Drilling Unit, 750W, 2″ Cutting Depth - 1800 pounds magnetic holding force. 17-inches height. Concealed motor wiring prevents wires from snagging or getting caught in tight spaces. Magnet foot measures 7-inches by 3-3/4-inches. 2-1/2-inches stroke. 1-3/16-inches maximum cutter diameter. Extremely compact mag base drilling unit for on-site drilling. With all metal construction and “smart magnet” circuitry is a durable and efficient unit. Measures 9. The jhm is a small, but powerfull drill that packs an unexpected punch in a compact 22 pound package. 65-inches length by 7. 430 watt power output. Optimum power/weight ratio for working at height. Includes (1) case, (1) coolant tank, (1) safety strap, (1) chip hook, (2) centering pins, (1) 5-millimeters hexagon wrench, (1) safety guard. Handwheel position can be changed in order to work in confined spaces. Easy guide adjustment. 02-inches to 14. 430 rpm load speed. Contact and chip guard. 680 rpm no load speed. 750 watt power consumption. 13-feet cable with plug. Gravity-fed cooling lubrication. 2-inches maximum cutter drilling depth. Right or left hand feed handles. 11. 3/4-inches weldon shank cutter holder. 68-inches width. Jancy engineering jhm short slugger. It has through spindle coolant and a multi-position coolant bottle and a patented internal motor cord.

 

NEW BLACK BRM-60A-B - BLUEROCK Â Tools Magnetic Drill - Mag Drill Typhoon Model

NEW! BLACK BRM-60A-B – BLUEROCK ® Tools Magnetic Drill – Mag Drill Typhoon Model

NEW! BLACK BRM-60A-B – BLUEROCK ® Tools Magnetic Drill – Mag Drill Typhoon Model - 75″ this is a brand new magnetic drill with one of the largest drilling diameters in it’s class. 72 lbs o n. Typhoon model brm60b magnetic drill by bluerock ® tools reversible drill with two speeds · specifications o drilling capacity annular cutters 7/16″, 2-1/4″ (12mm-60mm) o drilling capacity twist drill bit 1-1/4″ (32mm) o drilling depth 2″ (50mm) o tool holder mt3 with 2pc mt adapters (mt3-mt2 and mt2-mt1) mt3 3/4″ weldon shank (for standard annular cutters) mt3 3/4″ capacity drill chuck (for twist drill bits) o motor data 120v/ac 60hz, 1850w o duel speed 260 & 470 revolutions per/min o reversible o magnetic adhesion 4050 lbs o g. We do however sell sets of annular cutters/broaches in hss> for shipping outside of continental united states please contact for shipping quotation, if not otherwise specified in item description. W. 52 lbs o stroke 7. The bit and broach in the pictures are also not included. It comes with a plastic case (for protection during shipping), oil bottle, safety chain, mt key, 2pc mt adapters mt3 chuck, chuck key, mt3 weldon shank and hex wrenches. W.

 

Hougen HMD905 MAG DRILL - SWIVEL FAB KIT FRACTIONAL - 115V 0905109

Hougen HMD905 MAG DRILL – SWIVEL FAB KIT FRACTIONAL – 115V (0905109)

Hougen HMD905 MAG DRILL – SWIVEL FAB KIT FRACTIONAL – 115V (0905109) - Engages full power when motor is turned on• many accessories are available for a portable machine shop including drill chucks, tapping, countersink, and more. • two speed gear box, 250 & 450 rpm• positive slug ejection• two stage magnet. . 9 kg)• cutter dia max 1-5/8″ (41mm)• depth of cut max 2″ (50mm). • Weight 35 lbs (15.

 

Hougen HMD115 MAG DRILL - ULTRA LOW PROFILE - 230V 0115201

Hougen HMD115 MAG DRILL – ULTRA LOW PROFILE – 230V (0115201)

Hougen HMD115 MAG DRILL – ULTRA LOW PROFILE – 230V (0115201) - Sturdy hardened & tempered construction made with high grade s2 steel material for a long lasting existence molded red plastic bit holder included made in taiwan. Identical match for most standard tamper resistance german makes star 6 point also accessible to many other protected components. Variety sizes, multifunction, security tamper resistant 6 point star torx bit set set contains t4- 128 mm, t5- 142 mm, t6- 170 mm, t7- 199 mm, t8- 231 mm, t9- 250 mm, t10- 274 mm, t15- 327 mm, t20- 386 mm, t25- 443 mm, t27- 499 mm, t30- 552 mm, t40- 665 mm. Intended uses commonly used for body & trim pieces, interior frames and electrical sensors. 1″ length, holder sleeve, 1/4″ shank hex bits in sizes clicks onto most standard sockets, screwdrivers, drill/driver kits & power tools attachments the whole in the center in each bit causes it to be tamper resistance.

 

Jancy Holemaker II Portable Magnetic-Base Drill 240V 57 Amp Motor 1-38 Diameter x 2 Depth Capacity

Jancy Holemaker II Portable Magnetic-Base Drill, 240V, 5.7 Amp Motor, 1-3/8″ Diameter x 2″ Depth Capacity

Jancy Holemaker II Portable Magnetic-Base Drill, 240V, 5.7 Amp Motor, 1-3/8″ Diameter x 2″ Depth Capacity - 240v, 57 amp magnetic-base drill press with 175 horsepower (hp) 1380 watt single-phase motor weighs 30 lb. Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments. 1-3/8″ maximum cutting diameter and 2″ maximum cutting depth. Compact dimensions, for fabricating in confined spaces. 2350 lb magnet dead lift and 1095 lb drill point breakaway on 1″ thick steel.

 

Milwaukee 4210-1 125 Amp Electromagnetic Drill Press with 34-Inch Motor and Chuck

Milwaukee 4210-1 12.5 Amp Electromagnetic Drill Press with 3/4-Inch Motor and Chuck

Milwaukee 4210-1 12.5 Amp Electromagnetic Drill Press with 3/4-Inch Motor and Chuck - The product is easy to use. 125 amp motor. The product is manufactured in united states. 350 rpm no load speed. 3/4″ drill capacity. The product is durable. Feedback speed control. Solid state electronic switching.

 

Hougen HMD927 MAG DRILL - 2 SPDPWR FEEDSWIVELCOOLANT - 115V 0927104

Hougen HMD927 MAG DRILL – 2 SPD/PWR FEED/SWIVEL/COOLANT – 115V (0927104)

Hougen HMD927 MAG DRILL – 2 SPD/PWR FEED/SWIVEL/COOLANT – 115V (0927104) - Identical match for most standard tamper resistance german makes star 6 point also accessible to many other protected components. Variety sizes, multifunction, security tamper resistant 6 point star torx bit set set contains t4- 128 mm, t5- 142 mm, t6- 170 mm, t7- 199 mm, t8- 231 mm, t9- 250 mm, t10- 274 mm, t15- 327 mm, t20- 386 mm, t25- 443 mm, t27- 499 mm, t30- 552 mm, t40- 665 mm. Hougen® heavy-duty magnetic drill press has a powerful high-torque motor and 2-speed gear box that. 1″ length, holder sleeve, 1/4″ shank hex bits in sizes clicks onto most standard sockets, screwdrivers, drill/driver kits & power tools attachments the whole in the center in each bit causes it to be tamper resistance. Intended uses commonly used for body & trim pieces, interior frames and electrical sensors.

 

Jancy USA-5 Portable Magnetic-Base Drill 120V 117 Amp Motor 2-38 Diameter x 3 Depth Capacity

Jancy USA-5 Portable Magnetic-Base Drill, 120V, 11.7 Amp Motor, 2-3/8″ Diameter x 3″ Depth Capacity

Jancy USA-5 Portable Magnetic-Base Drill, 120V, 11.7 Amp Motor, 2-3/8″ Diameter x 3″ Depth Capacity - 2 speed gear box for 270 or 520 rpms. 2-3/8″ maximum cutting diameter and 3″ maximum cutting depth. 120v, 117 amp magnetic-base drill press with 18 horsepower (hp) 1400 watt single-phase motor weighs 51 lb. Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments. 2320 lb magnet dead lift and 950 lb drill point breakaway on 1″ thick steel.

 

Hougen HMD904 MAG DRILL - SWIVELCOOLANT - 230V 0904204

Hougen HMD904 MAG DRILL – SWIVEL/COOLANT – 230V (0904204)

Hougen HMD904 MAG DRILL – SWIVEL/COOLANT – 230V (0904204) - 1 / 2-inch single sleeve ratcheting chuck provides tight bit gripping strength make sure it’s not easy to shift when it works, and increasing the degree of orientation. Confident commitment to long-term warranty 3-year warranty on tool and 1-year warranty on battery. New battery group, fast charging, stable and efficient output, to ensure adequate power output. Compact, lightweight (46 lb) fits into tight areas design, small size, easy to control sharp bit, easy to operate. Simple driller, no-load speed 0-400 / 0-1200 rmp to help you repair small furniture, complete the manual work.

 

Hougen HMD904 MAG DRILL - COOLANT - 230V 0904202

Hougen HMD904 MAG DRILL – COOLANT – 230V (0904202)

Hougen HMD904 MAG DRILL – COOLANT – 230V (0904202) - Includes carrying case, hex keys, safety chain, external coolant bottle, safety guard, quick change arbor, removable handle, qx1234 drill/chuck adaptor. Quick change arbor allows for fast cutter change easily converts from annular cutters to twist drills with qx1234 drill/chuck adaptor. Cutter capacity 2-1/8″ diameter, 2″ depth of cut. Recommended for use with champion cutting tool rotobrute annular cutters. Powerful, lightweight 33 lbs, magnetic strength 3370 lbs, 2 speed motor 450/300 rpm.

 

Hougen HMD917SC Magnetic Drill Swivel - 115V - 0917104

Hougen HMD917SC Magnetic Drill Swivel – 115V – 0917104

Hougen HMD917SC Magnetic Drill Swivel – 115V – 0917104 - . 9 kg)• cutter dia max 2-3/8″ (60mm)• depth of cut max 3″ (76mm). • weight 46 lbs (20. Engages full power when motor is turned on• many accessories are available for a portable machine shop including drill chucks, tapping, countersink, and more. • Two speed gear box, 250 & 450 rpm• pilot light • positive slug ejection• two stage magnet.

 

Jancy USA-101 Portable Magnetic-Base Drill 120V 115 Amp Motor 1-12 Diameter x 2 Depth Capacity

Jancy USA-101 Portable Magnetic-Base Drill, 120V, 11.5 Amp Motor, 1-1/2″ Diameter x 2″ Depth Capacity

Jancy USA-101 Portable Magnetic-Base Drill, 120V, 11.5 Amp Motor, 1-1/2″ Diameter x 2″ Depth Capacity - 1480 lb magnet dead lift and 650 lb drill point breakaway on 1″ thick steel. Compact dimensions, for fabricating in confined spaces. 120v, 115 amp magnetic-base drill press with 175 horsepower (hp) 1380 watt single-phase motor weighs 29 lb. 1-1/2″ maximum cutting diameter and 2″ maximum cutting depth. Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments.

 

TYP-28A Mag Drill BLUEROCK Â Tools MINI Magnetic Drill Typhoon Small Mag Annular

TYP-28A Mag Drill BLUEROCK ® Tools MINI Magnetic Drill Typhoon Small Mag Annular

TYP-28A Mag Drill BLUEROCK ® Tools MINI Magnetic Drill Typhoon Small Mag Annular - The annular cutter bits in the picture are not included. It comes with a hard plastic carrying case, oil bottle, and safety chain. This is a brand new mini magnetic drill. New bluerock typ-28a mini magnetic drill · specifications o drilling capacity annular cutters 7/16″-1 1/2″ o drilling depth 2″ o tool holder direct arbor with ¾” weldon shank o motor data 110v/ac 60hz o speed 640 revolutions per/min o magnetic adhesion 2600 ft/lbs o height 10″, width 6″, length 10″ o it comes with a hard plastic carrying case (for protection during shipping), oil bottle, safety chain, and drill bit adapter. Color of case may be red or black. Great for small spaces and overhead holes.

 

HOUGEN HMD905 MAG DRILL FABRICATORS KIT FRACTIONAL MORE POWERFUL THAN A HMD904

HOUGEN HMD905 MAG DRILL FABRICATORS KIT FRACTIONAL MORE POWERFUL THAN A HMD904!

HOUGEN HMD905 MAG DRILL FABRICATORS KIT FRACTIONAL MORE POWERFUL THAN A HMD904! - Two speed gear box, 250 & 450 rpm. Large 1-5/8″ x 2″ capacity. Pilot light, for low light or no light conditions. Powerful high torque hougen motor and gears. Many accessories are available for a portable machine shop including drill chucks, tapping, countersink, and more.

 

Zenith Industries ZN510002 Mag Drill Coolant Kit

Zenith Industries ZN510002 Mag Drill Coolant Kit

Zenith Industries ZN510002 Mag Drill Coolant Kit - . This kit is easy to install and can be used with water or water soluble cutting fluid. This pressurized coolant delivery kit is designed for use with the zenith compact magnetic drill (510001).

 

Jancy Slugger JCM 312 Auto Magnetic Base Core Drilling Unit with 3 Speed Gear Box 3-18 Annular Cutter Diameter

Jancy Slugger JCM 312 Auto Magnetic Base Core Drilling Unit with 3 Speed Gear Box, 3-1/8″ Annular Cutter Diameter

Jancy Slugger JCM 312 Auto Magnetic Base Core Drilling Unit with 3 Speed Gear Box, 3-1/8″ Annular Cutter Diameter - Mt 3 capability. Cable with plug 13-feet. Weight according to epta 58. Electronic overload protection. Drill stand angular adjustment range +/-11 degree. Reaming maximum diameter 1-3/16-inches. Time and cost savings during large volume drilling due to a digitally controlled auto drill feed that provides uniform work progress in all materials combined with low tool wear. Fine drill spindle adjustment. 2nd gear load speed 160 to 260 rpm. 3rd gear load speed 350 to 580 rpm. Quickin max/quickin fast change system. Tool holder mt 3. Twist drill maximum diameter 1-1/4-inches. Unit includes case, safety strap, coolant tank, 1 quickin weldon adaptors for m18 x 6 p 1. Drill stand fine adjustment range +/-5/32-inches. Excellent job safety due to an extensive safety package with torque slip clutch, visual magnet holding power gauge and “viseo touch pad” controls. Powerful electromagnet. Electronic magnet holding force increases when drilling begins. 5, chip hook, 1/2″ 3-jaw chuck, drift, chip guard, 1 quickin mt3 arbor, 2 centering pins. Total stroke range 11-3/16-inches. Extra long stroke. Hss core bit maximum diameter 3-inches. Maximum tapping 1-1/8-inches. Core drill maximum drilling depth 2-inches. Speed setting memory. 2-pounds. Automatic coolant supply. 1st gear load speed 110 to 180 rpm. Predictable work times on contract and serial work due to repeatable and consistent drilling times. Countersinking maximum diameter 2-inches. Stroke 5-11/16-inches. Magnetic base measures 10-11/16-inches length by 3-9/16-inches width. Reversible. 3 speed mechanical gear box with tacho electronic variable speed control. Annular cutter maximum diameter 3-1/8-inches. Jancy slugger fully automatic core drilling unit for outstanding efficiency in the workshop. Input current 15 a. Cutter holder quickin/quickin max. Magnetic holding force 4050-pounds.

 

Jancy Magforce Portable Magnetic-Base Drill 120V 102 Amp Motor 1-58 Diameter x 2 Depth Capacity

Jancy Magforce Portable Magnetic-Base Drill, 120V, 10.2 Amp Motor, 1-5/8″ Diameter x 2″ Depth Capacity

Jancy Magforce Portable Magnetic-Base Drill, 120V, 10.2 Amp Motor, 1-5/8″ Diameter x 2″ Depth Capacity - 1-5/8″ maximum cutting diameter and 2″ maximum cutting depth. Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments. 120v, 102 amp magnetic-base drill press with 16 horsepower (hp) 1200 watt single-phase motor weighs 27 lb. Stationary motor ensures the working height remains constant. 1810 lb magnet dead lift and 1096 lb drill point breakaway on 1″ thick steel.

 

1 ANNULAR CUTTER SET BLUEROCK Â BRM35A MAGNETIC MAG DRILL Broach Bits BRM-35

1″ ANNULAR CUTTER SET & BLUEROCK ® BRM35A MAGNETIC MAG DRILL, Broach Bits BRM-35

1″ ANNULAR CUTTER SET & BLUEROCK ® BRM35A MAGNETIC MAG DRILL, Broach Bits BRM-35 - Bluerock ® tools magnetic drill brm-35a and 6 piece annular cutter set · drill and annular cutter specifications o drilling capacity 7/16″-1 1/2″ o drilling depth 2″ o tool holder direct arbor with ¾” weldon shank o motor data 110v/ac 60hz o speed 570 revolutions per/min o magnetic adhesion 2600 ft/lbs o g. W. This package deal also comes with a set of new high quality annular cutters. It has an adapter which allows for standard drill bits to be used. 44 lbs o n. W. This is a brand new magnetic drill. It comes with a hard plastic carrying case (for protection during shipping), oil bottle, safety chain, and drill bit adapter. 28 lbs o stroke 7. 5″ o size 19″ x 15″ x 8″ 1″ depth cutter sizes 9/16″, 11/16″, 13/16″, 15/16″, 1″, 1-1/16″ and centering pin.