Best 25 Raised Panel Cutters

 

Freud UC-208 Quadra-Cut Raised Panel Cutter for 5/8-Inch Stock - These quadra-cut raised panel cutters are designed for 5/8″thick panels. All 3/4″ bore cutters can be used withback-cutters uc230 and uc231 when using with3/4″ stock. All 1-1/4″ bore cutters can be usedwith back-cutters up230 and up231 when using3/4″ stock. .

 

Bosch 85640M Ogee Raised Panel Cutter 3-1/2-Inch Diameter 5/8-Inch Cut 1/2-Inch Shank Router Bit - . The fully hardened and tempered steel shank provides ultimate durability. Premium-quality micro grain carbide tips are ground on specialized cnc equipment for an extra-fine finish with maximum sharpness and edge retention. This bit is used for making an attractive ogee design in raised panel doors and paneling.

 

Freud UP223 Raised Panel Shaper Cutter For 3/4-Inch Stock, 1-1/4 Bore - Thick micrograin carbide tips. Covered by freud’s limited lifetime warranty. Kickback reducing design.

 

Woodtek 954118, Router Bits, Door Construction, Raised Panel & Backcutters, 2 Piece Raised Panel Cutter, 1/2″ Shank - Make raised panel doors on a router table. Using the reversible woodtek® carbide-tipped two-piece cove raised panel door set you can make perfect matching ogee stiles and rails for custom doors. The two-piece cove raised panel set with vertical panel bit is available for horizontal or vertical use as best suits your operation, use with table-mounted portable routers rugged ptfe (polytetrafluoroethylene) briteviewâ„¢ coating not only protects but the bright yellow color provides better visibility for safer operations. Cnc-machining to +/-0. 001″ tolerances and dynamic balancing help ensure vibration-free operation. Micro-grain carbide cutting surfaces have been diamond honed to 800 grit for minimal tear-out and smoother surface quality. 1/2″ shanks. Manufactured in facilities meeting stringent iso 90002000 quality assurance standards. Imported. Positive shear angle places less demand upon your routing equipment.

 

Freud RP-A34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - Two flute carbide design. Covered by freud’s limited lifetime warranty. C3 micro-grain tungsten carbide cutters. Covered by freud’s limited lifetime warranty. Covered by freud’s limited lifetime warranty.

 

Freud UP230 Radius Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters - Covered by freud’s limited lifetime warranty. Thick micrograin carbide tips. Kickback reducing design.

 

Freud RP-C34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - Covered by freud’s limited lifetime warranty. Two flute carbide design. C3 micro-grain tungsten carbide cutters. Covered by freud’s limited lifetime warranty. Covered by freud’s limited lifetime warranty.

 

Infinity Tools 83-005, 15° Shaker Raised Panel Shaper Cutter, 3/4″ Bore - 3-wing micro-grain carbide tips for a long life and repeated sharpening. Precision machined from fatigue-proof steel for extra strength. 3/4″ bore x 4-5/8″ cutter diam x 1-1/2″ profile width. Shaker profile. Silver ptfe coating reduces resin build-up for fast and easy cleaning.

 

Freud UP231 Bevel Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters Style: Bevel Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters Model: UP231 - Thick micrograin carbide tips. Kickback reducing design. Covered by freud’s limited lifetime warranty.

 

6Pc Roman Ogee Router Bit Raised Panel Back Cutters Rail & Stile 1/2″ Bits Case - Wooden case included. Suitable for home of wood work shop, carbide tipped. Raised panel w/back cutters rail & stile roman ogee cove straight router bits. 6pc roman ogee router bit raised panel back cutters rail & stile 1/2″ bits case.

 

Bosch 85638M Ogee Raised Panel Cutter 2-3/4-Inch Diameter 5/8-Inch Cut 1/2-Inch Shank Router Bit - This bit is used for making an attractive ogee design in raised panel doors and paneling. Premium-quality micro grain carbide tips are ground on specialized cnc equipment for an extra-fine finish with maximum sharpness and edge retention. The fully hardened and tempered steel shank provides ultimate durability.

 

Infinity Tools 83-004, Cove Raised Panel Shaper Cutter, 3/4″ Bore - Silver ptfe coating reduces resin build-up for fast and easy cleaning. Precision machined from fatigue-proof steel for extra strength. 3-wing micro-grain carbide tips for a long life and repeated sharpening. 3/4″ bore x 4-5/8″ cutter diam x 1-1/2″ profile width. Cove profile.

 

BOSCH 85640MC Ogee Raised Panel Cutter 3-3/8-Inch Diameter 5/8-Inch Cut 1/2-Inch Shank Router Bit - Bosch router bits are distinguished for their careful selection of materials exactly calculated cutting geometry, long bit life, extra sharp cutting edges and low vibration. We offer more than 500 items in solid carbide, carbide tipped and high speed steel varieties. .

 

Woodtek 954118, 5-pack , Router Bits, Door Construction, Raised Panel & Backcutters, 2 Piece Raised Panel Cutter, 1/2″ Shank - Manufactured in facilities meeting stringent iso 90002000 quality assurance standards. Positive shear angle places less demand upon your routing equipment. Cnc-machining to +/-0. Micro-grain carbide cutting surfaces have been diamond honed to 800 grit for minimal tear-out and smoother surface quality. Using the reversible woodtek® carbide-tipped two-piece cove raised panel door set you can make perfect matching ogee stiles and rails for custom doors. 1/2″ shanks. 001″ tolerances and dynamic balancing help ensure vibration-free operation. Imported. The two-piece cove raised panel set with vertical panel bit is available for horizontal or vertical use as best suits your operation, use with table-mounted portable routers rugged ptfe (polytetrafluoroethylene) briteviewâ„¢ coating not only protects but the bright yellow color provides better visibility for safer operations. Make raised panel doors on a router table.

 

CMT 695.013.A2 Pair of Profiled Knives for Professional Raised Panel Cutter Head - Pair of profiled knives for professional raised panel cutter head cmt 69401331. Made of super-strength steel. Size 60x119x15mm.

 

Bosch 85639M Raised Panel Cutter 1-1/2-Inch Diameter 5/8-Inch Cut 1/2-Inch Shank Router Bit - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Freud RP-B 5/8-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - Covered by freud’s limited lifetime warranty. Precision machined from fatigue-proof steel for extra strength. Covered by freud’s limited lifetime warranty. Cove profile. 3-wing micro-grain carbide tips for a long life and repeated sharpening.

 

Bosch 85641M Router Bit Carbide Tip 3-1/2 Cove Raised Panel Cutter - Overall diameter 3-3/8″overall length 2-7/8″cutting edge length 1/2″shank 1/2″bearing diameter 1/2″cutting width 1-7/16″radius 1-9/16″this bit is used for making an attractive cove design in raised panel doors and panelingused to create clean simple lines to accentuate a surfaceminimum recommended panel thickness is 3/4″micrograin carbide tips provide superior wear resistance and long liferecommended for use with a router tablecompact ball-bearing pilot guides bit along edge of material.

 

Freud UC-215 Quadra-Cut Raised Panel Cutter for 3/4-Inch Stock - 10 degree angle with 3/4″ bore. 5/8″ height and 15/64″ minor height. The small cutter, with opposite shear angle, will push wood fibers down and shear them off leaving a crisp edge at the top of the panel. 4-15/16″ diameter.

 

Raised Panel Back Cutters – B 3/4 | D 3-1/2 | CL 1/2 | R 1/4 - B = bore d = diameter cl = cutting length r = radius. 100% satisfaction guaranteed. I m p o r t a n t select size above based on legend below.

 

Freud RP-D 5/8-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - Covered by freud’s limited lifetime warranty. Precision machined from fatigue-proof steel for extra strength. 3-wing micro-grain carbide tips for a long life and repeated sharpening. Cove profile. Silver ptfe coating reduces resin build-up for fast and easy cleaning.

 

Freud RP-D34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - Two flute carbide design. C3 micro-grain tungsten carbide cutters. Covered by freud’s limited lifetime warranty. Covered by freud’s limited lifetime warranty. Trend it/7510081 raised panel cutter 180x25x30.

 

Infinity Tools 83-002, Standard Raised Panel Shaper Cutter, 3/4″ Bore - 3-wing micro-grain carbide tips for a long life and repeated sharpening. Precision machined from fatigue-proof steel for extra strength. 3/4″ bore x 4-5/8″ cutter diam x 1-1/2″ profile width. Silver ptfe coating reduces resin build-up for fast and easy cleaning. Standard profile.

 

Freud UP016 3 Wing Bevel Raised Panel Shaper Cutter For 5/8-Inch Stock, 1-1/4 Bore - Thick micrograin carbide tips. Covered by freud’s limited lifetime warranty. Kickback reducing design.

 

Freud RP-A 5/8-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Covered by freud’s limited lifetime warranty.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.