Best and Coolest 19 Tool Flutes

 

Richards Micro Tool 819C-460-312 Angled Edge Chamfer Mill 4 Flute Carbide 250 OAL 0324 Tool Flute Length

Richards Micro Tool 819C-460-312 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.50″ OAL, 0.324″ Tool Flute Length

Richards Micro Tool 819C-460-312 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.50″ OAL, 0.324″ Tool Flute Length - End type basic angled edge. Angle per side 30deg. 250overall length. Number of flutes, 4. 5/16diameter.

 

Richards Micro Tool 819C-4120-312 Angled Edge Chamfer Mill 4 Flute Carbide 250 OAL 0105 Tool Flute Length

Richards Micro Tool 819C-4120-312 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.50″ OAL, 0.105″ Tool Flute Length

Richards Micro Tool 819C-4120-312 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.50″ OAL, 0.105″ Tool Flute Length - Number of flutes, 4. 5/16diameter. 250overall length. End type basic angled edge. Angle per side 60deg.

 

Richards Micro Tool 819C-290-250 Angled Edge Chamfer Mill 2 Flute Carbide 250 OAL 0154 Tool Flute Length

Richards Micro Tool 819C-290-250 Angled Edge Chamfer Mill, 2 Flute, Carbide, 2.50″ OAL, 0.154″ Tool Flute Length

Richards Micro Tool 819C-290-250 Angled Edge Chamfer Mill, 2 Flute, Carbide, 2.50″ OAL, 0.154″ Tool Flute Length - 1/4diameter. End type basic angled edge. Angle per side 45deg. Number of flutes, 2. 250overall length.

 

Richards Micro Tool 819C-4100-500 Angled Edge Chamfer Mill 4 Flute Carbide 200 OAL 0031 Tool Flute Length

Richards Micro Tool 819C-4100-500 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.00″ OAL, 0.031″ Tool Flute Length

Richards Micro Tool 819C-4100-500 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.00″ OAL, 0.031″ Tool Flute Length - Number of flutes, 4. 1/2diameter. Angle per side 50deg. 300overall length. End type basic angled edge.

 

Richards Micro Tool 819C-460-375 Angled Edge Chamfer Mill 4 Flute Carbide 300 OAL 0432 Tool Flute Length

Richards Micro Tool 819C-460-375 Angled Edge Chamfer Mill, 4 Flute, Carbide, 3.00″ OAL, 0.432″ Tool Flute Length

Richards Micro Tool 819C-460-375 Angled Edge Chamfer Mill, 4 Flute, Carbide, 3.00″ OAL, 0.432″ Tool Flute Length - Number of flutes, 4. Angle per side 30deg. 250overall length. 3/8diameter. End type basic angled edge.

 

Richards Micro Tool 819C-482-375 Angled Edge Chamfer Mill 4 Flute Carbide 300 OAL 028 Tool Flute Length

Richards Micro Tool 819C-482-375 Angled Edge Chamfer Mill, 4 Flute, Carbide, 3.00″ OAL, 0.28″ Tool Flute Length

Richards Micro Tool 819C-482-375 Angled Edge Chamfer Mill, 4 Flute, Carbide, 3.00″ OAL, 0.28″ Tool Flute Length - End type basic angled edge. 250overall length. Angle per side 41deg. 3/8diameter. Number of flutes, 4.

 

Richards Micro Tool 819C-460-125 Angled Edge Chamfer Mill 4 Flute Carbide 250 OAL 0162 Tool Flute Length

Richards Micro Tool 819C-460-125 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.50″ OAL, 0.162″ Tool Flute Length

Richards Micro Tool 819C-460-125 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.50″ OAL, 0.162″ Tool Flute Length - 200overall length. Angle per side 30deg. Number of flutes, 4. 1/8diameter. End type basic angled edge.

 

Richards Micro Tool 819C-2100-312 Angled Edge Chamfer Mill 2 Flute Carbide 250 OAL 015 Tool Flute Length

Richards Micro Tool 819C-2100-312 Angled Edge Chamfer Mill, 2 Flute, Carbide, 2.50″ OAL, 0.15″ Tool Flute Length

Richards Micro Tool 819C-2100-312 Angled Edge Chamfer Mill, 2 Flute, Carbide, 2.50″ OAL, 0.15″ Tool Flute Length - 250overall length. Number of flutes, 2. Angle per side 50deg. End type basic angled edge. 5/16diameter.

 

Richards Micro Tool 819C-2100-125 Angled Edge Chamfer Mill 2 Flute Carbide 250 OAL 0073 Tool Flute Length

Richards Micro Tool 819C-2100-125 Angled Edge Chamfer Mill, 2 Flute, Carbide, 2.50″ OAL, 0.073″ Tool Flute Length

Richards Micro Tool 819C-2100-125 Angled Edge Chamfer Mill, 2 Flute, Carbide, 2.50″ OAL, 0.073″ Tool Flute Length - Number of flutes, 2. Angle per side 50deg. 200overall length. End type basic angled edge. 1/8diameter.

 

Richards Micro Tool 818-T345-375 Angled Edge Chamfer Mill 3 Flute Carbide 0386 Tool Flute Length

Richards Micro Tool 818-T345-375 Angled Edge Chamfer Mill, 3 Flute, Carbide, 0.386″ Tool Flute Length

Richards Micro Tool 818-T345-375 Angled Edge Chamfer Mill, 3 Flute, Carbide, 0.386″ Tool Flute Length - Number of flutes, 3. Angle per side 225deg. End type basic angled edge. 250overall length. 3/8diameter.

 

Richards Micro Tool 819C-4120-125 Angled Edge Chamfer Mill 4 Flute Carbide 250 OAL 005 Tool Flute Length

Richards Micro Tool 819C-4120-125 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.50″ OAL, 0.05″ Tool Flute Length

Richards Micro Tool 819C-4120-125 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.50″ OAL, 0.05″ Tool Flute Length - End type basic angled edge. 1/8diameter. Number of flutes, 4. 200overall length. Angle per side 60deg.

 

Richards Micro Tool 819C-2120-500 Angled Edge Chamfer Mill 4 Flute Carbide 200 OAL 01 Tool Flute Length

Richards Micro Tool 819C-2120-500 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.00″ OAL, 0.1″ Tool Flute Length

Richards Micro Tool 819C-2120-500 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.00″ OAL, 0.1″ Tool Flute Length - 300overall length. End type basic angled edge. Number of flutes, 2. 1/2diameter. Angle per side 60deg.

 

Richards Micro Tool 819C-4100-375 Angled Edge Chamfer Mill 4 Flute Carbide 300 OAL 0205 Tool Flute Length

Richards Micro Tool 819C-4100-375 Angled Edge Chamfer Mill, 4 Flute, Carbide, 3.00″ OAL, 0.205″ Tool Flute Length

Richards Micro Tool 819C-4100-375 Angled Edge Chamfer Mill, 4 Flute, Carbide, 3.00″ OAL, 0.205″ Tool Flute Length - 3/8diameter. 250overall length. End type basic angled edge. Angle per side 50deg. Number of flutes, 4.

 

Richards Micro Tool 819C-482-250 Angled Edge Chamfer Mill 4 Flute Carbide 250 OAL 017 Tool Flute Length

Richards Micro Tool 819C-482-250 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.50″ OAL, 0.17″ Tool Flute Length

Richards Micro Tool 819C-482-250 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.50″ OAL, 0.17″ Tool Flute Length - 1/4diameter. 250overall length. End type basic angled edge. Angle per side 41deg. Number of flutes, 4.

 

Richards Micro Tool 819C-290-312 Angled Edge Chamfer Mill 2 Flute Carbide 250 OAL 0188 Tool Flute Length

Richards Micro Tool 819C-290-312 Angled Edge Chamfer Mill, 2 Flute, Carbide, 2.50″ OAL, 0.188″ Tool Flute Length

Richards Micro Tool 819C-290-312 Angled Edge Chamfer Mill, 2 Flute, Carbide, 2.50″ OAL, 0.188″ Tool Flute Length - End type basic angled edge. Number of flutes, 2. Angle per side 45deg. 250overall length. 5/16diameter.

 

MYMIJUE 10pcs 18 3175 x 17mm Mill CNC Bits Single Flute Spiral Router Carbide End Mill Cutter Tool Set for Wood Cutting Acrylic Nylon Resin ABS and more Materials

MYMIJUE 10pcs 1/8″ 3.175 x 17mm Mill CNC Bits Single Flute Spiral Router Carbide End Mill Cutter Tool Set for Wood Cutting Acrylic Nylon Resin ABS and more Materials

MYMIJUE 10pcs 1/8″ 3.175 x 17mm Mill CNC Bits Single Flute Spiral Router Carbide End Mill Cutter Tool Set for Wood Cutting Acrylic Nylon Resin ABS and more Materials - Cutting diameter 1/8 inche 3175mm cutting length 067 inch 17mm. Application milling, cutting, engraving, hollow cut, slotting, and 3d relief sculpturing. 10 pieces per pack, long service life, precise. High quality solid carbide made, 3-5 years quality warranty. For material wood, acrylic, abs, pvc, mdf, nylon, resin and more.

 

Richards Micro Tool 819C-482-312 Angled Edge Chamfer Mill 4 Flute Carbide 250 OAL 0205 Tool Flute Length

Richards Micro Tool 819C-482-312 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.50″ OAL, 0.205″ Tool Flute Length

Richards Micro Tool 819C-482-312 Angled Edge Chamfer Mill, 4 Flute, Carbide, 2.50″ OAL, 0.205″ Tool Flute Length - 5/16diameter. Number of flutes, 4. 250overall length. Angle per side 41deg. End type basic angled edge.

 

Richards Micro Tool 819C-290-375 Angled Edge Chamfer Mill 2 Flute Carbide 300 OAL 025 Tool Flute Length

Richards Micro Tool 819C-290-375 Angled Edge Chamfer Mill, 2 Flute, Carbide, 3.00″ OAL, 0.25″ Tool Flute Length

Richards Micro Tool 819C-290-375 Angled Edge Chamfer Mill, 2 Flute, Carbide, 3.00″ OAL, 0.25″ Tool Flute Length - 3/8diameter. Number of flutes, 2. End type basic angled edge. 250overall length. Angle per side 45deg.

 

Seco 06540 PerfoMAX Indexable Insert Drill 0812 Diameter 2633 Tool Flute Length 1 Shank Diameter Weldon Flat Shank

Seco 06540 PerfoMAX Indexable Insert Drill, 0.812″ Diameter, 2.633″ Tool Flute Length, 1″ Shank Diameter, Weldon Flat Shank

Seco 06540 PerfoMAX Indexable Insert Drill, 0.812″ Diameter, 2.633″ Tool Flute Length, 1″ Shank Diameter, Weldon Flat Shank - Insert compatibility (peripheral) scgx 060204. Maximum drill depth 2436″. # Of drill inserts 2drill style sd503. Insert compatability spgx 0602-c1.