Chicago Latrobe HT18 High-Speed Steel Jobber Length Drill Bit and Hand Tap Set with Metal Case, Uncoated (Bright) Finish, Wire Size, Letter, Inch, 18-Piece, #6-32 to 1/2″-13 Tap Sizes
- Set contains 9 jobber length drill bits, including wire gauge sizes #36, #29, #25, #21, and #7 letter sizes f and u and inch sizes 5/16″ and 27/64″. Made in the usa. Uncoated (bright) finish provides an untreated surface. Set contains 9 plug-chamfer hand taps, including thread sizes 6-32 unc, 8-32 unc, 10-24 unc, 10-32 unf, 1/4″-20 unc, 5/16″-18 unc, 3/8″-16 unc, 7/16″-14 unc, and 1/2″-13 unc. High-speed steel (hss) provides hardness for wear resistance. 118-degree conventional point on the drill bit for a range of drilling applications.
6Pcs Titanium Coated Drill and Tap Set,Metric Thread HSS M3-M10 Screw Tapping bit Tool 1/4 Hex Shank
- These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated. They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them. Taps are designed with spiral flutes and the chip clearing process would be better. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance. There are total 6 pieces of taps in different sizes from m3 to m10 that you can use for tapping various threads.
Morse Cutting Tools 37104 Tap and Drill Set, NF Series, High Speed Steel, 104 Number
- Set contains #4-48 to 1/2″-20 nf taps, appropriate screw machine drill sizes, and a machinist’s guide for taps. Tap and drill set supplied in plastic pouch.
JIUWU 6.35mm Hex Shank Combination Drill and Tap Set, Spiral Thread Taper Composite Drilling Screw Tapping Tool Set Kit Hand Tool M3-M10
- Drill/tip drills, deburring and countersunk bits. High speed steel with titanium coating,which supports much longer service life. Back tapered beyond tap to prevent thread damage from over-drilling. Suitable for soft metal tapping, such as aluminum plate, thickness of less than 3–4mm. Applicable to some types of carbon steel and ordinary steel, copper and aluminum magnesium alloy drilling hole.
6 Pcs High Speed Steel HSS 4341 1/4″ Inch Hex Shank Screw Thread Metric Tap Drill Bit M3/4/5/6/8/10 Titanium Plated Combination Drill and Tap Set
- Performance threading system self aligns tap in pre drilled hole especially in irregular surfaces or through holes. Designed for hand threading work in a variety of materials. National course, self aligning tap & drill set.
Micro Taps, M1 to M3.5 Machine Hand Screw Thread Taps Set Thread Metric Plug Tap Drill Bits Thread Screw Tap Tool Set 10pcs for Clocks and Watches Tapping, Mini Hand Tap
- Standard thread distance design, clear and tidy, no burr. With these machine hand taps, you will have a smooth tapping experience with them. Adopting high speed steel with high wear and heat resistant, which is durable and has long service life. There are total 10 pieces of taps in 10 different sizes from m1 to m35 that you can use for tapping various threads. These machine hand taps are used for machining nuts or other common thread on the machine.
IRWIN Drill And Tap Set, 13-Piece (80185)
- High-carbon steel plug taps are great for general-purpose threading. Includes a plastic storage case. 135° split-point drill bits give fast, precise drilling. This tap and drill bit set produces a thread that is strong and easy to tap. Set pieces 6, 32 nc, 8, 32 nc, 10, 24 nc, 10, 32 nf, 12, 24 nc and 1/4″, 20 nc plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a t-handle tap wrench.
Sunxenze 6Pcs Titanium Combination Drill and Tap Set,Metric Thread HSS M3-M10 Screw Tapping bit Tool 1/4″ Hex Shank
- Package included6pcs drill tap countersink set. Shank dia635mm 1/4 hex shank. Metric thread size#1 m10×15,2# m8×125,#3 m6×1,#4 m5×08,#5 m4×07,#6 m3×05. Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.
Drill America m10 X 1.25 Carbon Steel Tap Set (Set of 3), DWT Series
- Carbon steel hand taps may also be used to thread mild steels. Used to re-thread damaged and/or jammed threads. Carbon steel hand taps come in three styles taper style starts the thread square with the workpiece plug style generally used in thru holes bottom style generate the thread to the bottom of the hole. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Drill America 40 Piece Carbon Steel Tap and Die Set with Hex Dies (3mm – 12mm NC and NF), DWT Series
- 3 x 12mm cs tap & die set with hex die. Comes in plastic carrying case. Carbon steel for re-threading. Tap & die set, 3-12 mm carbon steel tap die set with hex dies.
Du-Bro 372 3 mm Tap And Drill Set
- During that time, the company has grown from a single product, to 4 companies in three industries, offering more than 1,200 items. Innovation and reliability has been synonymous with du-bro for all these years and coupling that with great customer service and a knowledgeable, helpful staff, has made du-bro a staple line in all the industries they have taken on. Since 1959, the broberg family has owned and operated du-bro products, inc.
5PCS M3/M4/M5/M6/M8 HSS Titanium Plated Machine Straight Fluted Screw Thread Metric Plug Hand Tap Drill Set Hand Tools
- 5great tools used to create screw threads on wood, plastic, aluminum or many other soft materials. 2there are total 5 pieces of taps in different sizes from m3 to m8 that you can use for tapping various threads. 3they are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them. 1made from high quality high speed steel for high hardness. 4these taps are used with a tap wrench to do the tapping, wrench is not included.
AUTOTOOLHOME Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6
- Made from hardened high-speed steel (hss 4341) vs carbon steel for longer life. Deburr/countersink also provided on bit beyond back taper. Designed to tap up to 10-gauge metal. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling.
Champion Cutting Tool TD18-XL Brute Platinum NC Tap and Drill Set (18 Piece)
- Brute xl5 jobber drills drill 2x faster than cobalt, drill 3x longer than competitors drills, drill more accurate. Brute xl22 premium high speed taps thread longer, thread faster, thread accurate. Xl22 spiral point tap ejects chips ahead of tap. Convenient protective metal case for organized, neat, and safe storage of tools corresponding drill and tap equivalents for easy drilling and tapping of correct size holes. 18 piece nc drill and tap set- taps 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13 drills #33, #29, #25, #21, #7, f, 5/16, u, 27/64.
Champion DT22HEX-SET-MS5 MS Combination Drill and Tap Set, 5-Piece
- Contents include 6-32, 8-32, 10-24, 10-32, 12-24. The 135 degree split point drill permits holes to be cut at high speeds taping caution must be adhered to with slower speed. Superior strength durability provided by high molybdenum content and high speed steel with functional black and gold surface treatment that holds lubricant for smoother drilling. Applications include construction, electrical, maintenance, industrial, automotive, farm implement machinery, hvac cuts steel, cast iron, aluminum, bronze, brass, zinc and some stainless steel. Tapered neck design significantly reduces drill & tap breakage.
Hxchen Titanium Coated Drill and Tap Set, Metric Thread HSS M3-M10 Screw Tapping bit Tool 1/4 Hex Shank – (6 Pcs)
- These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated. Taps are designed with spiral flutes and the chip clearing process would be better. There are total 6 pieces of taps in different sizes from m3 to m10 that you can use for tapping various threads. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance. They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
Drill America 1″ Carbon Steel NPT Pipe Tap and 1-5/32″ High Speed Steel Drill Bit Set, POU Series
- 1″ carbon steel npt tap and 1-5/32″ hss drill bit with 1/2″ shank. Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads. Set contains matching npt pipe tap and high speed steel drill bit. Set comes in plastic pouch. Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
Xnrtop 6Pcs Metric Thread M3-M10 Screw Tapping Tool 1/4″ Hex Shank Titanium Plated HSS Combination Drill and Tap Set
- High speed steel with titanium coating,which supports much longer service life. 1/4 inch hex shank hss drill bit & screw tap set. Metric m3,m4,m5,m6,m8,m10 thread countersink screws can be tapped with this drill and tap set. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated. M3 x 05mm pitch,m4 x 07mm pitch,m5 x 08mm pitch,m6 x 10mm pitch,m8 x 125mm pitch,m10 x 15mm pitch.
Du-Bro 370 2mm Tap And Drill Set
- Innovation and reliability has been synonymous with du-bro for all these years and coupling that with great customer service and a knowledgeable, helpful staff, has made du-bro a staple line in all the industries they have taken on. During that time, the company has grown from a single product, to 4 companies in three industries, offering more than 1,200 items. Since 1959, the broberg family has owned and operated du-bro products, inc.
Chicago Latrobe HM18 High-Speed Steel Jobber Length Drill Bit and Tap Set with Metal Case, Black Oxide Drill Bits/Uncoated Taps, Metric, 18-piece, Metric Drill Bit Sizes, M2.5 to M12 Tap Sizes
- 118-degree conventional point on the drill bit for a range of drilling applications. Made in the usa. Set contains 9 jobber length drill bits, including metric sizes 205, 25, 29, 33, 42, 50, 67, 85, and 102 mm. High-speed steel (hss) provides hardness for wear resistance. Set contains 9 plug-chamfer hand taps, including thread sizes m25 x 045, m3 x 05, m35 x 06, m4 x 07, m5 x 08, m6 x 1, m8 x 125, m10 x 15, and m12 x 175. Black oxide finish on drill bits reduces wear while promoting chip and coolant flow on ferrous materials, and the uncoated (bright) finish on hand taps provides an untreated surface that can be used on a range of materials, especially soft metals.
IRWIN Drill And Tap Set, 4 – 40 NC Tap and No. 43 Drill Bit (80209)
- Tap crafted of high carbon steel for general purpose drilling. Drill bit constructed of high speed steel for fast and precise drilling. Includes 1 drill bit and 1 tap. Ideal for creating and threading fasteners holes in metal. Creates 40 threads per inch.
Astro Pneumatic Tool 7581 Metric Automotive Drill & Tap Set
- Includes, taps m12x175, m12x125, m10x15, m10x125, m9x125, m8x125, m8x10, m6x10, m5x08. Patented ratcheting tap wrench allows easy forward/reverse selection, or drive taps holders with simple ¾” wrench. Drills 106mm, 87mm, 78mm, 69mm, 50mm, 42mm, 2pc tap holders, 72 tooth ratcheting wrench and screw pitch gauge(metric). Taps are machined from an imported japanese tool steel alloy chosen for its ability to resist breakage. Includes the most common automotive tap sizes with short hss drill bits to match.
Kodiak Cutting Tools KCT120437 USA Made Tap and Drill Set in Metal Case, High Speed Steel, 6 to 1/2″ Diameter
- Tap and drill set inch diameter tap & drill set.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
