YG-1 DLGPSET933 26 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set, TiN Finish, Straight Shank, Parabolic Spiral Flute, 130 Degree (Set of 26)
- Set includes 1 each of a, b, c, d, e, f, g, h, i, j, k, l, m, n, o, p, q, r, s, t, u, v, w, x, y, z size drill bits. Improved chip removal in most materials, especially in deep drilling applications. Parabolic flute bright body tin coating on working part. Made of cobalt steel. 130 degree point angle.
Drillco 400E Series 29 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Drill Pal 1/16″ – 1/2″ in 1/64″ increments
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Round shanks allow use with a wide variety of toolholding systems. 29 drill pal mechanics length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increments. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Drillco 400N Series Nitro 29 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/2″ in 1/64″ increments
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. 29 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increment. Round shanks allow use with a wide variety of toolholding systems.
YG-1 D2GPSET930 56 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set, TiN Finish, Straight Shank, Slow Spiral, 135 Degree (Set of 56)
- Also includes #36, #37, #38, #39, #40, #41, #42, #43, #44, #45, #46, #47, #48, #49, #50, #51, #52, #53, #54, #55, #56 drill bits. Ansi specifications met. Set includes 1 each of #1, #2, #3, #4, #5, #6, #7, #8, #9, #10, #11, #12, #13, #14, #15, #16, #17, #18, #19, #20, #21, #22, #23, #24, #25, #26, #27, #28, #29, #30, #31, #32, #33, #34, #35 drill bits. Bright body tin coating on working part. Applicable for drilling in steel, cast steel alloyed and non-alloyed, grey cast iron, graphite, malleable cast iron.
Drillco 200LH Series 13 Piece High-Speed Steel Left Hand Jobber Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/16″ – 1/4″ in 1/64″ increments
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 13 jobber length drill bits ranging in size from 1/16″ to 1/4″ in 1/64″ increments. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Drillco 500E Series 60 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Size #1 – #60
- High red hardness of cobalt permits speeds 30 percent greater than hss drills. Round shanks allow use with a wide variety of toolholding systems. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. 60 jobber length drill bits ranging in size from #1 to #60. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
DRILLFORCE 13Pcs HSS Jobber Length Cobalt Drill Bits Set with Size 1/16-1/4 in Plastic Box
- Size1/16″, 5/64″ ,3/32″ ,7/64″, 1/8″, 9/64″ ,5/32″ ,11/64″ ,3/16″ ,13/64″ ,7/32″ ,15/64″, 1/4″. 135-degree split-point tip starts drilling immediately with less force and eliminates “walking” across the work surface. Ideal for drilling on mild steel, copper, aluminum, zinc alloy etc. Drillforce 13pcs hss jobber length cobalt drill bits set in plastic box. Hss coblat steel is high quality material- high speed steel.
Drillco 200B Series 115 Piece High-Speed Steel Jobber Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, includes: 1/16″ – 1/2″ in 1/64″ increments, Sizes #1 – 60 and A – Z
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. 115 piece jobber drill set. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Drillco 400N Series Nitro 21 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 3/8″ in 1/64″ increments
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 21 jobber length drill bits ranging in size from 1/16″ to 3/8″ in 1/64″ increments. Round shanks allow use with a wide variety of toolholding systems. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Champion TWISTER-US5-29 Contractor Series HSS GP Jobber Drill Bit Set-118 Deg. Black Oxide Treated 29 Piece
- Fits portable drilling machines. Cuts low & medium carbon steels, cast iron and wood. Application includes general contractor use, home owner.
Drillco 400N Series Nitro 29 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Drill Pal 1/16″ – 1/2″ in 1/64″ increments
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Round shanks allow use with a wide variety of toolholding systems. 29 drill pal mechanics length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increments.
Drillco 450T Series 60 Piece High-Speed Steel Jobber Drill Bit Set, Uncoated (Bright) Finish with TiN Tip, Round Shank, Spiral Flute, 135 Degrees Split Point, Size #1 – #60
- Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. 60 jobber length drill bits ranging in size from #1 to #60.
Drillco 500 Series 29 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Drill Pal 1/16″ – 1/2″ in 1/64″ increments
- Round shanks allow use with a wide variety of toolholding systems. 29 drill pal mechanics length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increments. High red hardness of cobalt permits speeds 30 percent greater than hss drills. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
Drillco 500E Series 29 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/2″ in 1/64″ increments
- Round shanks allow use with a wide variety of toolholding systems. High red hardness of cobalt permits speeds 30 percent greater than hss drills. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 29 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increment. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
Champion Cutting Tool Corp TWISTER-XGO Champion Cutting Tool Heavy Duty Black & Gold 29Piece Jobber Drill Bit Set- Made In USA, 135° Split Pt., 1/16″-1/2″x 64Ths,
- Recommended for drilling hard materials, high tensile alloy steels and stainless steels. 29 piece set includes 1/16″-1/2″ x 64ths convenient plastic case is great for tool protection, storage, and organization. Drill accurate due to 135 degree split point. Made in usa. Drill faster and longer than standard jobber drill bitsblack gold surface treated high speed steel holds lubricant for smoother, longer drilling.
Drill America KFD115J-SET KFD Black and Gold HSS Split Point Jobber Drill Bit Set in Metal Case, #1-60 Size, A-Z and 1/16-1/2 x 64ths, 115 Piece
- #1-60, a-z & 1/16-1/2 x 64ths 115 piece kfd black & gold hss split point jobber drill bit set in metal case. .
YG-1 D2GPSET930 56 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set, TiN Finish, Straight Shank, Slow Spiral, 135 Degree (Set of 56) by YG-1
- Set includes 1 each of #1, #2, #3, #4, #5, #6, #7, #8, #9, #10, #11, #12, #13, #14, #15, #16, #17, #18, #19, #20, #21, #22, #23, #24, #25, #26, #27, #28, #29, #30, #31, #32, #33, #34, #35 drill bitsalso includes #36, #37, #38, #39, #40, #41, #42, #43, #44, #45, #46, #47, #48, #49, #50, #51, #52, #53, #54, #55, #56 drill bitsbright body tin coating on working partapplicable for drilling in steel, cast steel alloyed and non-alloyed, grey cast iron, graphite, malleable cast ironansi specifications met.
Drillco 500 Series 21 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 3/8″ in 1/64″ increments
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 21 jobber length drill bits ranging in size from 1/16″ to 3/8″ in 1/64″ increments. High red hardness of cobalt permits speeds 30 percent greater than hss drills. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Round shanks allow use with a wide variety of toolholding systems.
Drillco 100SE Series 29 Piece High-Speed Steel Jobber Drill Bit Set, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/16″ – 1/2″ in 1/64″ increments
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. 29 piece jobber drill set. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Drillco 200LH Series 21 Piece High-Speed Steel Left Hand Jobber Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/16″ – 3/8″ in 1/64″ increments
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 21 jobber length drill bits ranging in size from 1/16″ to 3/8″ in 1/64″ increments. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Precision Twist C252ABSET 25-Piece Metric High Speed Steel Jobber Drill Bit Set with Size Range 1.0 mm – 13.0 mm x 0.5 mm, Steam Oxide Finish
- 118 degree point high speed steel drill. 25 piece metric high speed steel drill set with the size range from 10mm, 130mm x 5mm, steam oxide finish in a metal index. Steam oxide coated for increased wear resistance and lubricity.
Drillco 400N Series Nitro 21 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/4″ in 1/64″ increments & 9/32″ – 1/2″ in 1/32″ increments
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. 21 jobber length drill bits ranging in size from 1/16″ to 1/4″ in 1/64″ increments and from 9/32″ to 1/2″ in 1/32″ increments.
Viking Drill and Tool by Norseman 49042 SP-11M Type 643-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Bit Set (13 Piece)
- 13 pc set premium metric jobber 135-degree split point nas 907b. Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance. Nas 907b heavy duty jobber. Special hi-molybdenum tool steel/gold oxide. 135-degree split point for accurate centering and fast penetration.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
