KREG SDK-C2SS-700 2-Inch, #8 Coarse, Stainless Steel Deck Screws, 4200-Pack
- Stainless steel for the highest possible rust and corrosion resistance. Ktx square drive provides incredible cam-out resistance, less spinning, more driving. Self-tapping tip drills a hole while it’s driven. Flat bottom head creates secure hold, won’t split the workpiece. Ktx #1 square drive to reduce cam-out.
Kreg SPS-F1-500 Pocket Hole Screws 1-Inch #2 Fine Square Drive 500ct
- Kreg screws are constructed of highly durable case hardened steel for the strongest possible joint. Zinc coated kreg screws are recommended for a wide variety of indoor projects where exposure to moisture is not a significant concern. Only kreg screws are specifically designed to use with your kreg jig® to yield the strongest pocket hole joint possible. The unique design of the self-tapping tip acts as a pilot to drill its own hole in the mating workpiece to prevent your material from splitting.
Kreg Pocket-Hole #6 Screws, 1-1/4″, Panhead, Fine, (100)
- Coarse thread is for any combination of softwoods, plywood, and composites, and fine is for hardwoods. Designed for pocket-hole systems, kreg pocket-hole screws increase the strength of a pocket-hole joint. Cut-thread pattern prevents splitting.
Kreg SML-C1-1200 1″ Washer Head Coarse Thread Number 8 Zinc Coated Pocket Hole Screws (1200 Count)
- Compare a kreg screw to an ordinary wood screw or a drywall screw (which many use as a general-purpose screw for building) and you can see that the kreg screw has unique features that those other screws don’t. Kreg zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. At first glance, a kreg screw might not look much different from other wood screws. Every one of those features is there to ensure that you get the best results possible. But don’t be fooled there’s a lot of serious engineering built into them. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective blue-kote and stainless screw varieties.
Kreg SML-C2 2-Inch Washer Head #8 Coarse Pocket Screws, 50 Count
- These pocket hole screws, with their maxi-loc/square drive/washer heads, ensures that the screw will seat in the bottom of the pocket hole every time. For hardwoods, choose the fine thread. For softwoods and particleboard, the coarse thread gives you the driving and holding you need, with a self-tapping wood auger tip. The square drive washer head properly seats the screw in the bottom of the pocket hole, preventing the head from crushing the pocket in softer woods and particle board. You just need a standard pocket hole step drill for both #7 and #8 screws. Now available with new zinc coating these zinc coated screws are more durable and provide easy installation choose the right screws for the wood you’re using. Optional bin boxes are available with your order. The auger points provide for easy installation and minimal splitting. Washer head seats screw, preventing a crushed pocket & run through. Sold in packs of 50, 100, 250, 500 or new 1,000 packs. The zinc finish reduces friction for easy installation and protects from rust.
500 Piece No.7 x 1-1 2″ Kreg Screws
- . High quality pocket-hole screws for use in hardwood on a wide variety of projects.
Kreg SPS-F125-1000 1-1/4-Inch #6 Fine Pocket Hole Screws with Pan-Head, 1000-Pack
- Large diameter of steel shank creates durable screw. Washer head prevents overdriving in pocket bottoms. Self-tapping auger tips do away with predrilling. Bronze-colored finish helps improve driving torque.
Kreg Sps-f150-500 1 1/2″ Pan Head #6 Fine Thread 500 Ct Pocket Hole Screws
- Kreg screws are constructed of highly durable case hardened steel for the strongest. Possible joint the unique design of the self-tapping tip acts as a pilot to drill its own hole. A wide variety of indoor projects where exposure to moisture is not a significant concern. In the mating workpiece to prevent your material from splitting only kreg screws are sp. Kreg 1 1/2 pan head pocket hole screws 500 ct zinc coated kreg screws are recommended for”.
Kreg SML-C150-1200 1-1/2″ Coarse Thread Number 8 Washer Head Zinc Coated Pocket Hole Screws (1200 Count)
- At first glance, a kreg screw might not look much different from other wood screws. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective blue-kote and stainless screw varieties. But don’t be fooled there’s a lot of serious engineering built into them. Every one of those features is there to ensure that you get the best results possible. Kreg zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Compare a kreg screw to an ordinary wood screw or a drywall screw (which many use as a general-purpose screw for building) and you can see that the kreg screw has unique features that those other screws don’t.
Kreg SPS-F150 – 100 Pocket Screws 1 1/2-Inch, #6 Fine, Pan Head, 100 Count
- Coarse thread is for any combination of softwoods, plywood, and composites, and fine is for hardwoods. Designed for pocket-hole systems, kreg pocket-hole screws increase the strength of a pocket-hole joint. Cut-thread pattern prevents splitting.
Kreg SML-C2 – 250 Pocket Screws 2-Inch, #8 Coarse, Washer Head, 250 Count
- Designed for pocket-hole systems, kreg pocket-hole screws increase the strength of a pocket-hole joint. Coarse thread is for any combination of softwoods, plywood, and composites, and fine is for hardwoods. Cut-thread pattern prevents splitting.
K4MS+KMA2900+SK03 – Kreg K4MS Kreg Jig Master System + Kreg Multi-Mark + 675 Screws
- The master system includes a kreg jig® k4, bonus kreg® accessories the kreg® face clamp, portable base, and more. With its solid clamp, large clamping recess, dust collection attachment, material support stop, and removable 3-hole drill guide, this jig truly has it all. #Warranty lifetime kreg® drill guide warranty. #Includes kreg jig® k4, kreg® face clamp, portable base, drill guide spacer, material support stop, dust-collection attachment, 3/8″ (9mm) stepped drill bit, 6″ (152mm) square driver, 3″ (76mm) square driver, starter kreg® screw set, pocket-hole plug set, and owner’s manual. / Description #removable drill guide for benchtop and portable use #drill guide includes 3-hole fixed spacing #for use with materials 1/2″ to 11/2″ (12-38mm) thick in 1/8″ (3mm) incremental settings #dust-collection shroud collects wood chips as you work #material support stop for consistently repeating hole spacings #hardened-steel kreg® drill guides feature a lifetime warranty / specs #body material glass-filled nylon #number of drill guides (3) 3/8″ (9mm) diameter standard kreg® pocket holes #for use with materials from 1/2″ to 11/2″ thick (12-38mm) #drill guide spacings 9/16″, 7/8″, 17/16″ (14mm, 22mm, 36mm) #clamping method toggle clamp on benchtop base face clamp for portable base. The kreg jig® k4 master system is a great choice for any woodworking enthusiast looking for a complete set to get started building with kreg joinerytm. #screw-centering ability 1/2″, 5/8″, 3/4″, 7/8″, 1″, 11/8″, 11/4″, 13/8″, 11/2″ (12mm, 16mm, 19mm, 22mm, 25mm, 28mm, 31mm, 35mm, 38mm).
Kreg SML-C125-100 1-1/4-Inch 8-Coarse Washer-Head Pocket Screws, 100-Count
- Large diameter of steel shank creates durable screw. Larger threads provide maximum holding power. 1-1/4-inch length. Bronze-colored finish helps improve driving torque. Coarse thread.
Kreg SK02 Pocket Hole Screw Kit
- 675 screws in a plastic carrying case. Prevents driver from jumping out. Case hardened steel screws. 1- to 2-1/2-inch screws for pocket hole joints. Self-drilling auger point.
Kreg SML-F125-1200 1-1/4″ Washer Head Fine Thread Number 7 Zinc Coated Pocket Hole Screws (1200 Count)
- Every one of those features is there to ensure that you get the best results possible. Compare a kreg screw to an ordinary wood screw or a drywall screw (which many use as a general-purpose screw for building) and you can see that the kreg screw has unique features that those other screws don’t. But don’t be fooled there’s a lot of serious engineering built into them. . At first glance, a kreg screw might not look much different from other wood screws. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective blue-kote and stainless screw varieties. Kreg zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements.
Kreg SPS-C1-1200 1″ Pan Head Coarse Thread Number 7 Zinc Coated Pocket Hole Screws (1200 Count)
- Kreg zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective blue-kote and stainless screw varieties. At first glance, a kreg screw might not look much different from other wood screws. Every one of those features is there to ensure that you get the best results possible. Compare a kreg screw to an ordinary wood screw or a drywall screw (which many use as a general-purpose screw for building) and you can see that the kreg screw has unique features that those other screws don’t. But don’t be fooled there’s a lot of serious engineering built into them.
Kreg SML-C125-1200 1-1/4″ Washer Head Number 8 Zinc Coated Pocket Hole Screws (1200 Count)
- Every one of those features is there to ensure that you get the best results possible. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective blue-kote and stainless screw varieties. At first glance, a kreg screw might not look much different from other wood screws. Kreg zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. But don’t be fooled there’s a lot of serious engineering built into them. Compare a kreg screw to an ordinary wood screw or a drywall screw (which many use as a general-purpose screw for building) and you can see that the kreg screw has unique features that those other screws don’t.
Kreg SML-C250-50 2-1/2-Inch #8 Coarse Washer-Head Pocket Screws, 50 Count
- Maxi-loc washer head. 2-1/2-inch screw for joining 1-1/2-inch stock. Washer head seats flushly in the bottom of the pocket, eliminating pull through. Larger threads provide maximum holding power. Great for softer materials like pine, plywood, particle board, mdf and melamine.
Kreg SML-F125-250 1-1/4″ Washer Head Fine Thread Number 7 Zinc Coated Pocket Hole Screws (250 Count)
- Kreg zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Every one of those features is there to ensure that you get the best results possible. Compare a kreg screw to an ordinary wood screw or a drywall screw (which many use as a general-purpose screw for building) and you can see that the kreg screw has unique features that those other screws don’t. But don’t be fooled there’s a lot of serious engineering built into them. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective blue-kote and stainless screw varieties. At first glance, a kreg screw might not look much different from other wood screws.
Kreg SML-C1-500 1-Inch #8 Coarse Washer-Head Pocket Hole Screws, 500-Pack
- Great for softer materials like pine, plywood, particle board, mdf and melamine. 1-inch screw for joining 1/2-inch stock. Washer head seats flush in the bottom of the pocket, eliminating pull through. 500 coarse washer head screws with wide bearing head surface. Larger threads provide maximum holding power.
Kreg SML-C125-5000 1 1/4-Inch Pocket Screws, #8 Coarse, Washer Head, 5000-Pack
- Manufacturer’s limited 30-day warranty. Larger threads provide maximum holding power. Ideal for softer materials like pine, plywood, particle board, mdf, and melamine. Strong, durable 1-1/4-inch washer head screws ideal for joining a variety of different stock. Maxi-loc washer head.
Kreg SPS-C1-100 Pocket Screws – 1-Inch, 7 Coarse, Pan-Head, 100-Count
- 100 per pack. It is designed to eliminate splitting. Heat treated pan head screw uses a #2 square drive. This screw is designed to eliminate splitting and features a chrome/zinc finish. Square drive head has a flat bearing surface, semi-elliptical top and self-tapping wood auger tip. Optional bin boxes are available with your order. Panhead seats screw, preventing a crushed pocket & run through.
Kreg SML-C125B-1200 1-1/4″ Coarse Thread Number 8, Blue Kote Pocket Hole Screws (1200 Count)
- Every one of those features is there to ensure that you get the best results possible. At first glance, a kreg screw might not look much different from other wood screws. But don’t be fooled there’s a lot of serious engineering built into them. Compare a kreg screw to an ordinary wood screw or a drywall screw (which many use as a general-purpose screw for building) and you can see that the kreg screw has unique features that those other screws don’t. Blue-kote screws provide rust-resistance up to 400% greater than zinc-plated screws and work with pressure-treated material. Blue-kote screws feature three anti-corrosion layers, making them the perfect choice for a wide variety of indoor and outdoor projects.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
