Morris 17469 Universal Beam Clamp, Steel, 3/4″ Flange
- Tapped for rods, bottom and back. Case hardened steel set screw tapped at an angle locks on beam. Beam clamps universal, steel, used with conduit hangers, bridle rings and threaded rod. Zinc plated steel. Used with conduit hangers, bridle rings and threaded rod.
Spring Steel Beam Clamps – Hammer On – 1/4″- 20 x 3/8″ Stud 1/8″ – 1/4″ Flange (Pkg of 25)
- Spring steel beam clamps, hammer on, 1/4″-20 x 3/8″ stud, 1/8″, 1/4″ flange can be used to suspend boxes, fixtures and bridle rings to beam flanges 1/8″ to 1/4″spring steel beam clamps, hammer on, 1/4″-20 x 3/8″ stud 1/8″, 1/4″ flange features include can be used to suspend boxes, fixtures and bridle rings to beam flanges 1/8″ to 1/4″ ultimate static load limit, 75 lbs. Beam clamp with 1/4″-20 x 3/8″ staked stud used to suspend box from bottom of beam order qty of 1 = 1 piece culus listed below is more info on our spring steel beam clamps, hammer on, 1/4-20 x 3/8″ stud 1/8″, 1/4″ flange.
Stainless Steel Beam Clamp With 15/16 Inch Jaw Opening And 1/4-20 Threaded Holes-5 per case
- Clearance for 1/4″ bolt in tab. Indoors/outdoors. Able to be used on flange thickness of 1/8″ to 3/4″. Spring steel flange beam clamp can be installed with hammer on bulb tees and beams. Stainless steel beam clamp with 15/16 inch jaw opening and 1/4-20 threaded holes.
Steel Beam Clamp 1/4-20 Stamped Round Edges
- Advantagesgarvin industries beam clamps provide an economical means of hanging medium-duty loads. Their threaded backs and bottoms allow for versatility in design. Stamped steel beam clamps with 3/4″ jaw opening are used with conduit hangers, bridle rings and are tapped on their bottoms and backs for drop 1/4-20 rods. Applicationthese beam clamps are used with conduit hangers, bridle rings and drop rods sized 10-24, 1/4-20 or 3/8-16. Field namesbeam clamps, stamped steel beam clamps, c style beam clamps, fullman clamps. Their threaded backs and bottoms allow for versatility in design. Garvin industries beam clamps provide an economical means of hanging medium duty loads. Additionally, their hardened, cup-point screw and heavy gauge steel body will not distort when tightened on the beam. They are tapped for rods on their bottoms and backs, except part # 602bss, it is tapped only for bottoms. Additionally, their hardened cup point screw and heavy gauge steel body will not distort when tightened on the beam.
Steel Beam Clamp #1
- Mechanical adjustment allows interchanging between gantry cranes. Unique design provides a fixed-position lifting point. Manual locking screw mechanism easily adjusts width. Solid steel construction provides long lasting rugged use.
MINRLAC 600 1/2 Steel BEAM CLAMP
- Morris 18012 spring steel beam clamp, hammer on flange, 1/8, 1/4. 1/8 inches, 1/4 inches.
Northern Industrial Steel Beam Clamp – 1 Ton
- All-steel construction for long-lasting strength. Adjusts in seconds to fit a variety of girder widths. Flange width (in. Compact and easy to install with minimum headroom. ) 2 15/16 to 8 5/8, capacity (ton) 1, material steel.
MINRLAC 602B 3/4 Steel BEAM CLAMP
- Morris 18012 spring steel beam clamp, hammer on flange, 1/8, 1/4. 1/8 inches, 1/4 inches.
Morris 18012 Spring Steel Beam Clamp, Hammer On Flange, 1/8 – 1/4 by Morris
- Spring steel beam clamps, hammer on, durable and versatile spring steel beam clamps. Hammer on spring steel beam clamps can be used to suspend boxes, fixtures & bridle rings to beam flanges 1/8 to 1/2 thickultimate static load limit, 75 or 100 lbs. (75 lbs front 100 lbs rear)note static load limits cannot be combinedbottom & back tapped 1/4-20.
BRIDGEPORT ARL BC25 (BRI 951-S) 1/4-20 PLATED STEEL BEAM CLAMPS
- Secure your cable supports with this beam clamp from arlington industries. Made from plated steel, it has a trade size of 2″ and takes a threaded rod size of 1/4-20″, while supporting loads up to 75 pounds. .
Thomas & Betts: Steel Beam Clamp, BC1SC1 2pk
- 62″, 1 each. 87″,c-1. No. 62″, trade size 1″, material steel. Steel, dimensions a-1. Upc coded. 87″, c-1. 1″ trade size. 50″, b-0. Bc1sc1 base size a-1. 50″, b-.
Vestil BC-2 Steel Beam Clamp, 2000 lbs Capacity, 2-1/2″ – 8-1/2″ Flange Width
- A bar is located at the bottom of the beam clamp for attaching a hoist (sold separately). These versatile units can be interchanged from one gantry to another in a matter of seconds with its easy mechanical adjustment mechanism. Designed to reduce the i-beam flange stress by distributing loads away from the flange edges during overhead lifting applications. 2-1/2″, 8-1/2″ beam flange width. Steel construction and painted finish.
Morris 18018 Universal Beam Clamp, Spring Steel, 1/8″ – 1/4″
- Static load capacity of 200 lbs. Able to be used on flange thickness of 1/8″ to 3/4″. Spring steel flange beam clamp can be installed with hammer on bulb tees and beams. Clearance for 1/4″ bolt in tab. Spring steel beam clamp universal, spring steel beam clamp universal with 200 lb limit.
Morris 18020 Universal Beam Clamp, Spring Steel, 5/16″ – 1/2″
- Spring steel flange beam clamp can be installed with hammer on bulb tees and beams. Able to be used on flange thickness of 1/8″ to 3/4″. Clearance for 1/4″ bolt in tab. Static load capacity of 200 lbs. Spring steel beam clamp universal, spring steel beam clamp universal with 200 lb limit.
Spring Steel Beam Clamps – Hammer On – 1/4″- 20 x 3/8″ Stud 1/8″ – 1/4″ Flange (Pkg of 10)
- Beam clamp with 1/4″-20 x 3/8″ staked stud used to suspend box from bottom of beam order qty of 1 = 1 piece culus listed below is more info on our spring steel beam clamps, hammer on, 1/4-20 x 3/8″ stud 1/8″, 1/4″ flange. Spring steel beam clamps, hammer on, 1/4″-20 x 3/8″ stud, 1/8″, 1/4″ flange can be used to suspend boxes, fixtures and bridle rings to beam flanges 1/8″ to 1/4″spring steel beam clamps, hammer on, 1/4″-20 x 3/8″ stud 1/8″, 1/4″ flange features include can be used to suspend boxes, fixtures and bridle rings to beam flanges 1/8″ to 1/4″ ultimate static load limit, 75 lbs.
Morris 18016 Spring Steel Beam Clamp, 1/2 by Morris
- Spring steel beam clamps 1/2small spring steel beam clamps install quickly fits beam flange to 1/2used with 1/4 and 3/8 threaded rod & hooks, conduit hangers, electrical boxes, and #10-24 or 1/4-20 bridle ringsstatic load capacity 100 lbs. Tapping 1/4-20 bottom & back.
Minerallac 602 MINRLAC 3/4 Steel BEAM CLAMP,
- Finish goldgalv. Material steel. For use with a-1200, a-1400, b-1200, b-1400, c-1200 and b-1402 series channel.
Spring Steel Beam Clamps – Hammer On – 1/4″- 20 x 3/8″ Stud 5/16″ – 1/2″ Flange (Pkg of 3)
- Beam clamp with 1/4″-20 x 3/8″ staked stud used to suspend box from bottom of beam order qty of 1 = 1 piece culus listed below is more info on our spring steel beam clamps, hammer on, 1/4″-20 x 3/8″ stud 5/16″-1/2″ flange. Spring steel beam clamps, hammer on, 1/4″-20 x 3/8″ stud 5/16″-1/2″ flange, can be used to suspend boxes, fixtures and bridle rings to beam flanges 5/16″ to 1/2″spring steel beam clamps, hammer on, 1/4-20 x 3/8″ stud 5/16″, 1/2″ flange features include can be used to suspend boxes, fixtures and bridle rings to beam flanges 5/16″ to 1/2″ ultimate static load limit, 75 lbs.
Halex 96560 1/4-20 Steel Beam Clamp
- Eliminates the need to drill a hole through the beam. Made from steel. Beam clamp. The product is manufactured in china. The product is 1″ unit stl beam clamp. Clamps on beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger, either directly or by means of a threaded rod. Use to secure conduit to a metal beam. Easy to use.
Thomas & Betts #BC1SC-1 1″ Universal Steel Beam Clamp
- Thomas & betts #bc1sc-1 1″ universal steel beam clamp. Thomas & betts.
Spring Steel Beam Clamps – Hammer On – 1/4″- 20 x 3/8″ Stud 5/16″ – 1/2″ Flange (Pkg of 10)
- Spring steel beam clamps, hammer on, 1/4″-20 x 3/8″ stud 5/16″-1/2″ flange, can be used to suspend boxes, fixtures and bridle rings to beam flanges 5/16″ to 1/2″spring steel beam clamps, hammer on, 1/4-20 x 3/8″ stud 5/16″, 1/2″ flange features include can be used to suspend boxes, fixtures and bridle rings to beam flanges 5/16″ to 1/2″ ultimate static load limit, 75 lbs. Beam clamp with 1/4″-20 x 3/8″ staked stud used to suspend box from bottom of beam order qty of 1 = 1 piece culus listed below is more info on our spring steel beam clamps, hammer on, 1/4″-20 x 3/8″ stud 5/16″-1/2″ flange.
Morris 18124 Spring Steel Beam Clamps, Hammer On, 5/16″ – 1/2″
- Ultimate static load limit, 75 lbs. Beam clamp with 1/4″-20 x 3/8″ staked stud used to suspend box from bottom of beam. Can be used to suspend boxes, fixtures and bridle rings to beam flanges 1/8″ to 1/2″. Spring steel beam clamps, hammer on, 1/4″-20 x 3/8″ stud, can be used to suspend boxes, fixtures and bridle rings to beam flanges 1/8″ to 3/4″.
Spring Steel Beam Clamp Universal 9/16″-3/4″ Flange (Pkg of 25)
- Limit. Spring steel beam clamp universal 9/16″-3/4″ features include spring steel flange beam clamp can be installed with hammer on bulb tees and beams able to be used on flange thickness of 9/16″ to 3/4″ static load capacity of 200 lbs clearance for 1/4†bolt in tab culus listed order qty of 1 = 1 piece below is more info on our spring steel beam clamp universal 9/16″-3/4″. Spring steel beam clamp universal 9/16″-3/4″, spring steel beam clamp universal with 200 lb.
Vestil BC-8 Steel Beam Clamp, 8000 lbs Capacity,3-1/2″ to 12-1/4″ Flange Width
- Steel construction and painted finish. These versatile units can be interchanged from one gantry to another in a matter of seconds with its easy mechanical adjustment mechanism. Designed to reduce the i-beam flange stress by distributing loads away from the flange edges during overhead lifting applications. A bar is located at the bottom of the beam clamp for attaching a hoist (sold separately). 3-1/2″ to 12-1/4″ beam flange width.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
