Muzata Threaded Hand Crimp Swage Stud and Stemball Swage Pack for 1/8″ Cable Railing Kit System,Tension End Fitting,T316 Marine Grade Stainless Steel 20Pairs CK14,Series CA1 CD1 CS1 CD2 CS2
- This cable railing kit includes 20pcs swage threaded studs and 20pcs stemball swages,can create 20 runs 1/8″ railing cablekit made of t316 marine grade stainless steelthey can be used indoor or outdoor wood & metal post,decking railing,stairs railing handrails. You could search for these partnumbers which are paired muzata cable railing kit accessories to work better with this 1/8 stainless steel cable wire rope (muzata wr01)customized hydraulic crimper (muzata cr09),cable cutter(muzata cr12)protector sleeves(muzata cr13)30 degree angle beveled washer(muzata cr25), stemball swage(muzata cr24). Overall length =413″, thread length =133″, pilot hole size = 1/8″for all cable railing fitting series — search muzata ca1 for stair angled railing series — search muzata cs1 for cable railing tool series — search muzata ct1 for cable railing wire rope series — search muzata wp1 . These deck railing hardware require a special hand crimper tool make sure to use muzata customized hand swaging tool for stainless steel 1/8″ fittings(search for muzata cr09) standard crimper tools typically will not put a sufficient crimp on these steel fittings, which could result in cable loosening and slipping out. Both terminals and stemballs fitting ends are hidden in the post to keep deck or stair cable railing system prettythe threaded terminal tensions your cable railing with only a few turns of a hex nutthe stemball swage end holds the cable in place on one endperfect for wood steel or aluminum post.
Muzata Stemball Swage Dead Ends Threaded Stud Tension End Terminal for 1/8″ Cable Railing,Hand Crimp Fixed Tensioner,Stainless Steel T316 Marine Grade 50Pack CR24,Series CA1 CD1 CS1 CD2 CS2
- This fixed end is typically paired with a threaded terminal or turnbuckle on the opposite end of a cable run recommend to use with muzata threaded terminal stud end (search for muzata cr23), cable protector sleeve(search for muzata cr13),1/8″ stainless steel cable wire rope (muzata wr01)customized hydraulic crimper (muzata cr09),cable cutter(muzata cr12)30 degree angle beveled washer(muzata cr25). These t316 marine stemball swage fittings provided a “dead end” for 1/8″ stainless steel wire rope invisible cable railing project hidden in all sorts of post,from 4x4s down to 2″pipes,make a clean look for wood post or metal post. Hand crimp need a hand crimping tool to crimp on the 1/8″ cable wire rope,recommend to search for muzata cr09 to purchase muzata custom hand crimper swage tool. Overall length of stemball = 1-1/2″ head diameter = 25/64″ recommended drill hole diameter = 1/4″. These stainless steel hand crimp stemball swages end fittings are the perfect end for cable railing the stemball swages provide an economical end fitting, while still making sure your railing is functional as well as safe and secure.
Muzata Stemball Swage Stud Dead Ends,Threaded Stud Paired with Cable Tensioner for 1/8″ Cable Railing Kit, Hand Crimp Stainless Steel T316 Marine Grade,10PCS CR24,Series CA1 CD1 CS1 CD2 CS2 CV1
- Recommended this cable railing fitting work together with other muzata cable railing accessories muzata wr01→1/8″ stainless steel wire rope cable,muzata cr09→customized hydraulic crimper superhard mold for steelmuzata cr12→cable cutter up to 5/32″muzata cr25→30 degree angle beveled washermuzata cr13→cable railing sleeves. These t316 marine grade fittings provided a “dead end” for a diy1/8″ stainless steel cable railing project. This fixed end is typically paired with a threaded terminal or turnbuckle on the opposite end of a cable run recommend to use with muzata threaded terminal stud end (search for muzata cr23) and cable protector sleeve(search for muzata cr13). Hand crimp need a hand crimping tool to crimp on the 1/8″ cable wire rope,recommend to search b07fk7kvvw to purchase muzata custom hand crimper swage tool. These end fittings can be used hidden in all sorts of post, from 4x4s down to 2″pipes make a clean look for wood post or metal post,overall length of stemball = 1-1/2″ head diameter = 25/64″ recommended drill hole diameter = 1/4″.
1/8″ Cable Lag Swage Screw Stud Tensioner Right & Left Hand Threaded End Fitting Terminal – Staircases Deck Wire Rope Cable Railing Rigging Hand Crimp Swage Stainless Steel T316 – Marine Grade
- Thread length 1-7/8″, overall length 3-7/8″. Cable size 1/8″, thread 1/4″. Package includes 2pc set, 1pc, right hand thread & 1pc, left hand thread. High quality, marine grade for maximum corrosion resistance. Right & left hand thread included, to avoid unwinding of cable when installing, great for wood post hand rail.
Molex Incorporated 63811-6500 Hand Crimp Tool
- These end fittings can be used hidden in all sorts of post, from 4x4s down to 2″pipes make a clean look for wood post or metal post,overall length of stemball = 1-1/2″ head diameter = 25/64″ recommended drill hole diameter = 1/4″. These t316 marine grade fittings provided a “dead end” for a diy1/8″ stainless steel cable railing project. Hand crimp need a hand crimping tool to crimp on the 1/8″ cable wire rope,recommend to search muzata ct1 to purchase muzata custom hand crimper swage tool. Muzata is manufacture directly we provide full solution to commit all your need and only offer the highest quality and most affordable cable railing hardware for your deck and balustrade railing projectplease search for these partnumbers to work better with this 1/8 stainless steel cable(muzata wr01)customized hydraulic crimper (muzata cr09),cable cutter(muzata cr12)protector sleeves(muzata cr13)30 degree angle beveled washer(muzata cr25). This fixed end is typically paired with a threaded terminal or turnbuckle on the opposite end of a cable run recommend to use with muzata threaded terminal stud end (search for muzata cr23) and cable protector sleeve(search for muzata cr13).
VistaView CableTec Stainless Steel DIY Hand-Crimp Threaded Tensioner Ends for 3/16″ Cable Railing (4-1/4″ Long, for Wood Or Metal Posts) – Lot of 10
- Decorative, terminals are primarily housed within end posts with only the stainless nuts and caps exposed on the outside of the post. Unctional, use on one end or both ends of your strands for maximum tensioning ability. High-grade stainless steel, these terminals are made of t316 marine-grade steel that offers maximum durability in harsh climates. All-purpose, these threaded tensioners can be used on all sorts of posts, from 4×4’s down to 2″ pipes. Do it yourself, these fittings are used to properly tension cable strands in a diy cable railing project.
10pc Set – Stainless Steel Type 316 Marine Grade Hand Crimp Deck Toggle and Swage Stud Turnbuckle Fitting for Cable Railing Rigging Hardware Surface Mount Deck, Stairs -3/16″ Cable
- Turnbuckle dimensions eyes for screws 1/4″, overall length closed 7-1/2″. A swage tool is required for crimping. Package includes 10pc set (1 turnbuckle, 1 fitting & 4 screws per set). Deck toggle end fitting dimensions eyes for screws 1/4″, overall length 3″. Stainless steel t316 deck toggle turnbuckle & deck toggle hand swage fitting for 3/16″ cable.
Molex Crimpers/Hand Crimp Tool, 24-18 awg 63819-0901
- Male and female crimp terminals, 16-24 awg. Molex crimpers / hand crimp tool, 24-18 awg use with part(s) mini-fit jr.
K41 Positioner for AFM8/WA22 Hand Crimp Tool Frame, Crimp Contacts M38999 Series2 22#,22M#,22D# Socket M39029/57-356,57-355,57-354
- Gives a standardized and accurate crimp every time suitable for military connectors,heavy duty connectors,electric connectors,terminals,wiring harness manufacturing industry,cable assembly. We make every efforts to provide our customers with tool selection services, product customization services great after-sales services and product maintenance services. Cablegia specializes in designing and manufacturing hand/ pneumatic indents crimping tools, open frame die crimper, positioners, turret heads for wire crimpers.
MOLEX 64016-0201 TOOLS, HAND CRIMP, MOLEX C-GRID,KK SERIES TERMINALS
- Molex 64016-0201 tools, hand crimp, molex c-grid,kk series terminals.
Molex Crimpers / Hand Crimp Tool, 24-16 awg 63819-0900
- Molex crimpers / hand crimp tool, 24-16 awg.
T316 Stainless Steel Lag Screw Stud Thread Fitting Terminal for 1/8″ Cable Railing Rigging Wire Rope Deck Stairs Hand Crimp Swage Marine Grade (100)
- Easy to use lag screw system is a streamline stainless steel wire balustrade systems for straight, stair or angled sections when using timber posts to install the lag screw system into your timber posts, simply pass one end of the lag screw system through any intermediate posts and screw each lag screw simultaneously into your posts to create tension. Applications perfect for planning your diy cable railing project, good for indoor or outdoor applications left & right hand threaded swage lag screws fit for 1/8″ stainless steel wire rope cable. T316 marine grade stainless steel for maximum durability, strength, and weather protection. Overall length = 3-7/8″, thread diameter = 1/4″, pilot hole size = 1/8″. Swage lag screw for 1/8″ cable hand swage stainless steel t316 marine grade.
10pcs Left Hand Thread Lag Screw Hand-Crimp Swage Stud for 1/8″ Cable Railing Stainless Steel T316 Marine Grade
- 【Fitment/compatibility】 fit for 1/8″ cable railing stainless steel t316 marine grade. 【Size】 overall length = 4″, thread length = 2″, thread diameter = 1/4″, pilot hole size = 1/8″. 【applications】 high-quality stainless steel fittings surface mount a traditional diy cable railing into wood, perfectly planning your own cable railing project, good for indoor or outdoor applications. 【Package includes】 10 left hand thread lag screw hand-crimp swage stud. 【Material】top quality left hand thread lag screw hand-crimp swage stud, made of t316 marine grade stainless steel for maximum durability, strength and weatherability.
10pcs Right Hand Thread Lag Screw Hand-Crimp Swage Stud for 1/8″ Cable Railing Stainless Steel T316 Marine Grade
- 【Package includes】 10 right hand thread lag screw hand-crimp swage stud. 【Size】 overall length = 4″, thread length = 2″, thread diameter = 1/4″, pilot hole size = 1/8″. 【Fitment/compatibility】 fit for 1/8″ cable railing stainless steel t316 marine grade. 【Applications】 high-quality stainless steel fittings surface mount a traditional diy cable railing into wood, perfectly planning your own cable railing project, good for indoor or outdoor applications. 【material】top quality right hand thread lag screw hand-crimp swage stud, made of t316 marine grade stainless steel for maximum durability, strength and weatherability.
DasMarine Swage Turnbuckle with Lag Screw for 1/8″ Cable Wire Deck Stair Railing, Hand Crimp Swage, Stainless Steel T316 Marine Grade Cable Railing Kit (Pack of 10)
- ▲This lag screw swage turnbuckle used to mount the 1/8″ wire rope cable in the wooden balusters. ▲high quality stainless steel t316 marine grade for maximum durability, high tensile and anti-fatigue strength, and weather protection hand swage and industry leading manufacturing process. ▲These swage turnbuckles with lag screws are for cable runs that attach to the surface of a wood post or wall the screw is about 19 inch long so you will not have to offset them if used in a 4×4 corner post overall length of the turnbuckle including the lag screw is 8 inch. ▲Overall length = 8″ max length = 11″ thread length = 1-1/2″ hole size = 1/8″. ▲ Package included 10 pack of swage turnbuckle with lag screw for 1/8″ cable wire deck stair railing.
Homend 50 Pack 316 Stainless Steel Hand-Crimp Stemball Swages for 1/8″ Cable Railing Marine Grade
- √ Invisible hidden in the post make a clean look for wood post or metal post. √ Hand-crimp need a hand crimping tool to crimp on the 1/8″cable wire rope. √ Measurements：overall length of stemball is 1-1/2″ head diameter is 25/64″. √ top quality t316 marine grade perfect for fitting 1/8″ stainless steel cable to make a dead end. √ Package included 50 pcs 316 stainless steel hand-crimp stemball swages.
50Pcs Lag Screw Stud Thread Fitting Terminal for 1/8″ Cable Railing Rigging Wire Rope Deck Stairs Hand Crimp Swage Stainless Steel T316 Marine Grade
- ● These stainless steel fittings surface mount a traditional diy cable railing into wood. ● Swage lag screw for 1/8″ cable hand swage stainless steel t316 marine grade. ● these t316 stainless steel cable railing hardware are perfect for planning your own cable railing project, good for indoor or outdoor applications. ● Overall length = 3-7/8″, thread diameter = 1/4″, pilot hole size = 1/8″. ● T316 marine grade stainless steel for maximum durability, strength, and weather protection.
Canare TC-1 Hand Crimp Tool without Die-by Canare
- High quality, marine grade for maximum corrosion resistance. Type 316 stainless steel hand swage extra long fitting, for 3/16″ cable. A swage tool is required for crimping. Overall length 10″, length of thread 7-1/2″, thread 1/4″- 20. Each set comes with stud, nut, washer & cap nut.
VistaView CableTec Stainless Steel Hand-Crimp Stemball Swages for 1/8″ Cable Railing for Metal Posts (Low Clearance Head) – Lot of 50
- High-grade stainless steel, these stemballs are made of t316 marine-grade steel that offers maximum durability in harsh climates. Hidden, the stemball swages provide a simple, hidden end to a cable railing with a very small, low clearance head being the only exposed part. Do it yourself, these high-quality fittings provided a “dead end” for a diy cable railing project. Functional, this fixed end is typically paired with a threaded terminal or turnbuckle on the opposite end of a cable run. Affordable, stemball swages are the most economical type of end fitting you could use, while still being 100% functional.
K41 Positioner for Daniels DMC AFM8/WA22 Hand Crimp tool Socket M39029/57-356,57-355,57-354 Crimp Contacts M38999 Series2 22#,22M#,22D#
- Please note cablegial are authorized store on amazon that can sell cablegial brand products. Purchasing in other stores will not guarantee these services. Gives a standardized and accurate crimp every time suitable for military connectors,heavy duty connectors,electric connectors,terminals,wiring harness manufacturing industry,cable assembly. We make every efforts to provide our customers with tool selection services, product customization services great after-sales services and product maintenance services. Cablegia specializes in designing and manufacturing hand/ pneumatic indents crimping tools, open frame die crimper, positioners, turret heads for wire crimpers.
UGarden Custom Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8″ to 3/16″ Cable -Wire Swaging Tool-10 Ton and Stainless Steel Cable Cutter
- What you get includes die positioning pin, seal rings, strong protective carrying case, cable cutter and pair of work gloves. Size hydraulic hand crimper tool lengthapprox310mm, weightapproxnw175kg gw3kg cable cutter 81 x 28 x 14 inches, weight112 ounces. Material made of durable materials with high strength and good toughness dies are made of hardened steel with chrome finishvinyl-dipped grip for comfort and easy control cable cutter using sk5 high carbon steel seiko forging, durable. Easy to use on/off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire the c-style head makes side entry easier to change the dies. Compatibility crimps 12 awg to 2/0 awg size copper and aluminum wires maximum crimping power10 tons stroke 12mm the hydraulic crimper is suitable for power wires, electrical cables, battery cables and welding cables cable cutter cuts up to 5/32″ stainless steel cable.
Stainless Steel Hand Crimp Toggle and Stud Turnbuckle Tensioner for 3/16″ Cable -Cable Railing Fitting – Stud Fitting – Deck Railing – Hand Railing (10Sets)
- Stainless steel t316, toggle & stud turnbuckle tensioner for 3/16″ cable. High quality, marine grade for maximum corrosion resistance. A swage tool is required for crimiping. Package includes 10sets (1set = 1 turnbuckle & 1 end fitting, as pictured). Overall length closed 7-1/8″, length of body 3-3/4″, jaw opening 040″, pin diameter 023″.
Bestbode Hand-Crimp Stemball Swages Threaded Stud Paired with Cable Tensioner Fixed Ends for 1/8″ Cable Railing,for Wood and Metal Posts,T316 Marine Stainless Steel 10PACK BC10
- These high-quality stainless steel stemball swage fittings provide a “dead end” for a traditional diy 1/8 inch cable railing, decking railing,stairs railing handrails,compatible for metal or wood posts. Marine-style hydraulic hand crimper tool required for installationbestbode bc12,cable cutter bestbode bc11. Overall length of stemball = 1-1/2″ head diameter = 25/64″ recommended drill hole diameter = 1/4″,compatible for 1/8″ cable railing. Typically paired with a threaded terminal (search for bestbode bc06)or turnbuckle railing kit (search for bestbode bc02) on opposite end of cable run. The stemball swage end holds the cable in place on one end,t316 marine grade stainless steel for maximum durability,strength and weather protectionthe stemballs are good for outdoor and indoor applications.
VistaView CableTec Stainless Steel DIY Hand-Crimp Threaded Tensioner Ends for 1/8″ Cable Railing (3-3/4″ Long, for Wood Or Metal Posts) – Lot of 10
- All-purpose, these threaded tensioners can be used on all sorts of posts, from 4×4’s down to 2″ pipes. High-grade stainless steel, these terminals are made of t316 marine-grade steel that offers maximum durability in harsh climates. Decorative, terminals are primarily housed within end posts with only the stainless nuts and caps exposed on the outside of the post. Do it yourself, these fittings are used to properly tension cable strands in a diy cable railing project. Unctional, use on one end or both ends of your strands for maximum tensioning ability.
Muzata Stemball Swage Stud Dead Ends,Threaded Stud Paired with Cable Tensioner for 1/8″ Cable Railing Kit, Hand Crimp Stainless Steel T316 Marine Grade,30PCS CR24,Series CA1 CD1 CS1 CD2 CS2 CV1
- Hand crimp need a hand crimping tool to crimp on the 1/8″ cable wire rope,recommend to search for muzata cr09 to purchase muzata custom hand crimper swage tool. These end fittings can be used hidden in all sorts of post, from 4x4s down to 2″pipes make a clean look for wood post or metal post,overall length of stemball = 1-1/2″ head diameter = 25/64″ recommended drill hole diameter = 1/4″. These t316 marine grade fittings provided a “dead end” for diy 1/8″ stainless steel cable railing project. This fixed end is typically paired with a threaded terminal or turnbuckle on the opposite end of a cable run recommend to use with muzata threaded terminal stud end (search for muzata cr23) and cable protector sleeve(search for muzata cr13). Recommended this cable railing fitting work together with other muzata cable railing accessoriesmuzata is cable railing kit hardware manufacture we provide full solution to customers and only offer the highest quality and most affordable cable railing hardware for your deck and balustrade railing project cable railing fitting search for muzata ca1,stair angled railing search for muzata cs1 cable railing tool search for muzata ct1 cable railing wire rope search for muzata wp1.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
