The Hillman Group 41567 Flat Head Phillips Tapper Concrete Screw Anchor 3/16 X 2 1/4 20-Pack
- For light to medium duty applications. . State of the art thread design cuts into concrete. Tapper screws are perfect for indoor and outdoor use. Tapper screws are designed for fastening applications in concrete, block and brick. Use tapper screws to attach electrical equipment, two by fours, downspout straps, hose reels, flag poles, hurricane shutters and more.
Chenango Supply 1/4 x 1-1/4″ Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (1/4 x 1-1/4)
- . Used to anchor signs, fixtures to concrete and block buildings. Included masonry drill bit is 3/16″ size. Concrete screws or “tapcons” are great for screwing into concrete.
(47300) 1/4 x 2-3/4″ Hex 100pk Concrete Screws
- Heads will not strip out-allows for more torque. Acr3 driver bit and 3/16″ drill bit included. Patented phillips ii drive system with acr. Corrosion resistance, can be used in pt wood. Code approved.
1/4″ x 2-1/4″, Powers Wedge-Bolt+ Heavy Duty Concrete Screw Anchors, Hex Head, Carbon Steel Zinc Plated, 100/Bx
- 1/4″ x 2-1/4″, powers wedge-bolt+ heavy duty concrete screw anchors, hex head, carbon steel zinc plated, 100/bx.
(46200) 1/4 x 1-3/4″ PFH 100pk Concrete Screws
- Patented phillips ii drive system with acr. Corrosion resistance, can be used in pt wood. Code approved. Heads will not strip out-allows for more torque. Acr3 driver bit and 3/16″ drill bit included.
Kwiktap (47100)1/4 X 1- 1/4″ Hex 100 Pk Concrete Screws [misc.]
- Patented phillips ii drive system with acr. Acr3 driver bit and 3/16″ drill bit included. Code approved. Heads will not strip out-allows for more torque. Corrosion resistance, can be used in pt wood.
Hard-to-Find Fastener 014973161903 Phillips Flat Concrete Screws, 3/16 x 1-1/4-Inch
- We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance.
Chenango Supply 3/16 x 1-3/4″ Hex Head Concrete Screw Anchor. 100 pieces With Drill Bit (3/16 x 1-3/4)
- Cuts its own threads in concrete. 5/32 concrete screw drill bit included in box. Hex head uses 1/4 nut driver. 1000 hour salt spray test coating. These are commonly known as tapcons.
IRWIN Tools 1881080 Impact Performance Series Concrete Screw Drill-Drive Installation Set for 3/16-Inch and 1/4-Inch Screws, 7-Piece
- Manufactured with heavy-duty, cold-forged, high-grade steel to withstand high torque output. Built for maximum durability and long life with impact drivers. One-piece construction withstands higher torque loads than standard quick-change bits. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. Black oxide finish resists corrosion and increases life of bit.
(66200)3/16 x 1-3/4″ PFH 100pk Concrete Screws
- Patented phillips ii with acr drive drive system. Acr3 bit and 5/32 drill bit included. Corrosion resistance, can be used in pt wood. Heads will not strip out-allows for more torque. Complete system.
IRWIN Tools 1870568 Impact Performance Series Concrete Screw Installation 3/16-Inch X 5-Inch Drill Bit for 1/4-Inch Screws
- Built for maximum durability and long life with impact drivers. One-piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life.
Chenango Supply 3/16 x 1-3/4″ Phillips Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (3/16 x 1-3/4)
- Included masonry drill bit is 5/32″ size. . Concrete screws or “tapcons” are great for screwing into concrete. Used to anchor signs, fixtures to concrete and block buildings.
Wej-It Stalgard Coated Carbon Steel Flat Head Concrete Screw, USA Made, #3 Phillips Drive, 1/4″ Diameter, 1-1/4″ Length, Pack of (100)
- 900 lb. 920 lb. The flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. The wej-it wej-con concrete screw cuts threads into concrete, hollow block, brick, mortar, and concrete masonry units (cmus) to provide a secure hold without requiring threaded inserts. Wej-it fastening systems manufactures mechanical and adhesive fasteners for use in concrete and drywall. 1/4″1,000 lb. The screw can be removed and reinstalled into the same hole to enable fixture changes or screw replacement. 670 lb. What’s in the box100 wej-it fcs1411 concrete screws1 drill bit. 1,100 lb. Warning use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). The anchor is made of 1022 carbon steel for strength and has a corrosion-resistant blue r-blocker coating that meets american society for testing and materials (astm) b117 standards to resist 1,000 hours of salt spray. 695 lb. 425 lb. 550 lb. 635 lb. Specificationsfits hole sizeultimate tensile strength in 1,924-psi hollow block @ 1-1/4″ embedment depth and 1″ edge distanceultimate shear strength in 1,924-psi hollow block @ 1-1/4″ embedment depth and 1″ edge distanceultimate tensile strength in 2,730-psi concrete @ 1″ embedment depth and 1″ edge distanceultimate shear strength in 2,730-psi concrete @ 1″ embedment depth and 1″ edge distanceultimate tensile strength in 2,730-psi concrete @ 1-3/4″ embedment depth and 1″ edge distanceultimate shear strength in 2,730-psi concrete @ 1-3/4″ embedment depth and 1″ edge distance3/16″425 lb. Concrete screws are threaded fasteners that install into hard, brittle materials such as concrete, brick, and block to securely fasten a fixture. The company, founded more than 60 years ago, is headquartered in norwalk, ct. The screw includes a drill bit to create the correct size hole for installation. 860 lb. 1,860 lb. The twin-lead threads and the fully threaded point cut into the mounting material to secure the screw placement and resist pull-out. These screws have hardened threads that cut into the sides of a drilled hole to secure their placement in the material. The phillips drive has an x-shaped slot that accepts a phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener. For more information, see the manufacturer’s literature.
Bosch TC100 5/32-Inch by 3-1/2-Inch Concrete Screw Drill Bit
- Bosch holds the tightest dimension to ensure low run out. Magnetic nut setters hold the screw in place and keep the sleeve from being damaged, extending the life of the entire system. Complete program including all sizes, the bit holder, the bit sleeve and a complete anchoring system. Bosch not only has a rich heritage in concrete, but is the largest manufacturer of concrete drill bits in the world.
1/4″ x 1-1/4″ Wej-It Slotted Hex Washer Head Wej-Con (Tapcon) Concrete Screw w/ Bit – 100/BX
- 1/4″ x 1-1/4″ wej-it slotted hex washer head wej-con (tapcon) concrete screw w/ bit, 100 pieces per box.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
