Coolest 15 Crosscut Saws in 2020

 

Crosscut Saw

Crosscut Saw

Crosscut Saw - 5mm thick teeth pitch of 1. Teeth are taper ground preventing the blade from binding amidst deep cuts. 4mm, 19 tpi cane wrapped wood handle made in japan. The crosscut saw is ideal for cross-cutting both soft and hard woods. Features impulse hardened teeth ensuring consistent cutting through the life of the blade. Measures 22-3/8″ in total length blade has a 9-1/2″ cutting edge and is 0.

 

Simple Woodworking Tools Symbols Creative Cartoon Vinyl Sticker 2 Tall Crosscut Saw

Simple Woodworking Tools Symbols Creative Cartoon Vinyl Sticker (2″ Tall, Crosscut Saw)

Simple Woodworking Tools Symbols Creative Cartoon Vinyl Sticker (2″ Tall, Crosscut Saw) - One order comes with two (2) vinyl decals. Can be placed on any flat and clean surface (ex cars, laptops, books, walls). Easy to apply & easy to remove, no residue left behind. Durable high-quality water-resistant vinyl decal. All stickers & designs are approved licensed and manufactured by shinobi stickers company only.

 

Lynx Garlick Taytools Thomas Flinn British 24 Crosscut Saw with Taper Ground Blade Stained Beech Handle 10 TPI Filed for Cross Cutting

Lynx Garlick Taytools Thomas Flinn British 24″ Crosscut Saw with Taper Ground Blade, Stained Beech Handle 10 TPI Filed for Cross Cutting

Lynx Garlick Taytools Thomas Flinn British 24″ Crosscut Saw with Taper Ground Blade, Stained Beech Handle 10 TPI Filed for Cross Cutting - The saw plate is taper-ground and gets progressively thinner (approx 0005 inches) from the teeth to the back of the saw this greatly reduced binding in the cuts. Handle is stained european beech with brass button screws. 24″ saw plate has 10 tpi and filed for cross cutting. This saw is made by thomas flinn of sheffield england the last traditional saw and plane maker in the uk. Saw plate is made from sheffield allow spring steel and taper ground providing a good balance of edge durability and ease of sharpening.

 

Crosscut Saw with 28-Inch Steel Blade for Wood Lumber Timber - Made in the USA

Crosscut Saw with 28-Inch Steel Blade for Wood, Lumber, Timber – Made in the USA

Crosscut Saw with 28-Inch Steel Blade for Wood, Lumber, Timber – Made in the USA - Heavy duty, won’t clog or bind on timber while tree trimming or cutting large branches. Maximum log size, recommended for logs, or pruning up to 12 inches in diameter. American design, designed by a california firm that makes professional arborist tools, leave the chainsaw in the garage with this manual pruning and lumber saw. Unique short length perfect for one person, 28 inch blade pruning saw with 4 tpi that cuts wet or dry round logs.

 

Lynx 6 Two Man Crosscut Saw

Lynx 6′ Two Man Crosscut Saw

Lynx 6′ Two Man Crosscut Saw - Each saw is made from british cs80 steel with a rockwell hardness of 44-46 and a thickness of 1. The two handles are solid beech, and the teeth can be re-sharpened with a large triangular file. 5mm to provide a superior stiffness when cutting on long strokes. These large saws have been used mostly in forestry work and for crosscutting large logs, but in recent years they have become popular with people aiming to cut their own firewood in a more traditional fashion. This blade’s tooth pattern is a peg tooth formation at 1 tpi, hand set, and cut with the pull/push stroke in each direction.

 

dsdzkj 36ft Two Man Crosscut Saw

dsdzkj 3.6ft Two Man Crosscut Saw

dsdzkj 3.6ft Two Man Crosscut Saw - Saw crosscut design provides a super sharp & effective cutting edge. 36′ two man crosscut saw is intended for cutting green wood where it truly excels crosscut log and timber saw is ideal for cutting medium to large logs. Crosscut saw overall length 44 in blade length 394 in 2 teeth per inch hardwood handle with miter feature. Two-man crosscut saw handles fit into sockets at each end of the blade durable log handle for a no-slip grip. Best crosscut saw is used mostly in forestry work and the crosscutting of large logs, now also commonly used in cutting trees and firewood at home.

 

FS Tool LH140 Crosscut Saw Blade 10 X 40T ATB 58″ Bore

FS Tool LH140 Crosscut Saw Blade 10″ X 40T (ATB), 5/8″ Bore

FS Tool LH140 Crosscut Saw Blade 10″ X 40T (ATB), 5/8″ Bore - For cut-off and trimming of solid woods, plywood and plastic laminated sheets. On portable machines and table saws.

 

Crosscut Saw with 24-Inch Steel Blade for Wood PVC Bamboo 7 TPI

Crosscut Saw with 24-Inch Steel Blade for Wood, PVC, Bamboo, 7 TPI

Crosscut Saw with 24-Inch Steel Blade for Wood, PVC, Bamboo, 7 TPI - Triple-cut teeth hardened to stay sharp for smooth, fast sawing. Full-sized blade that is 26″ long and made from alloy spring steel for a good combination of flexibility and hardness. 7 teeth per inch (tpi), precisely hand sharpened and set to ensure the best possible rip cut. Ergonomic handle design, anti-skid and frosting treatment, more comfortable hand feel, suitable for long-term operation. Taper ground blade to minimize binding during the cut won’t clog or bind on timber while tree trimming or cutting large branches.

 

Lackmond Beast Crosscut Saw Blades - ATB Grind - 12 HardwoodSoftwood Cutting Tool with Thin Kerf and High Tooth Count For Fine Cuts 1 Arbor  - WCB12080

Lackmond Beast Crosscut Saw Blades – ATB Grind – 12″ Hardwood/Softwood Cutting Tool with Thin Kerf and High Tooth Count For Fine Cuts & 1″ Arbor – WCB12080

Lackmond Beast Crosscut Saw Blades – ATB Grind – 12″ Hardwood/Softwood Cutting Tool with Thin Kerf and High Tooth Count For Fine Cuts & 1″ Arbor – WCB12080 - Built for the professional, this is the ideal diamond saw blade for construction workers, carpenters, general contractors, serious diyers, and tradesmen. Equipment, table saw radial arm saw. Alternate top bevel grind, alternating left and right bevel which cleanly shear the wood fibers when crosscutting. Expert design, the thin kerf and high tooth count make this blade the most suitable for crosscutting and trimming of natural wood, this blade is capable of making fine and extra fine cuts. Veri-blend high density carbide, lackmond’s titanium carbide tipped blades provide the best performance for your specific cutting application, resulting in superior finish and extended blade life.

 

FS Tool L23250 Crosscut Saw Blade 10 X 60T TCG 58″ Bore

FS Tool L23250 Crosscut Saw Blade 10″ X 60T (TCG), 5/8″ Bore

FS Tool L23250 Crosscut Saw Blade 10″ X 60T (TCG), 5/8″ Bore - On table saws, sliding table saws and cut-off saws. For general cut-off and trimming of plastic laminated materials (single sided), or (double sided) using a pre-scoring unit.

 

Lynx 4 Two Man Crosscut Saw

Lynx 4′ Two Man Crosscut Saw

Lynx 4′ Two Man Crosscut Saw - It is made from british cs80 steel with a rockwell hardness of 44-46 and a thickness of 1. The two handles are solid beech, and the teeth can be re-sharpened with a large triangular file. 5mm to provide the superior stiffness needed to cut long strokes. The blade’s tooth pattern is a peg tooth formation at 1 tpi, hand set, and cut with the pull/push stroke in each direction. This large saw is used mostly in forestry work and the crosscutting of large logs, but in recent years it has been purchased by people aiming to cut their own firewood in a more traditional fashion.

 

FS Tool L23302 Crosscut Saw Blade 300 MM X 72T TCG 30 MM Bore FOR Altendorf Omga SCMI and Striebig saws

FS Tool L23302 Crosscut Saw Blade 300 MM X 72T (TCG), 30 MM Bore FOR Altendorf, Omga, SCMI, and Striebig saws

FS Tool L23302 Crosscut Saw Blade 300 MM X 72T (TCG), 30 MM Bore FOR Altendorf, Omga, SCMI, and Striebig saws - On table saws, sliding table saws and cut-off saws. For general cut-off and trimming of plastic laminated materials (single sided), or (double sided) using a pre-scoring unit. For altendorf, omga, scmi, and striebig saws.

 

Lynx Garlick Thomas Flinn British 22 Crosscut Saw with Taper Ground Blade Stained Beech Handle 10 TPI and Filed Crosscut

Lynx Garlick Thomas Flinn British 22″ Crosscut Saw with Taper Ground Blade, Stained Beech Handle 10 TPI and Filed Crosscut

Lynx Garlick Thomas Flinn British 22″ Crosscut Saw with Taper Ground Blade, Stained Beech Handle 10 TPI and Filed Crosscut - Handle is stained european beech with brass button screws. This saw is made by thomas flinn of sheffield england the last traditional saw and plane maker in the uk. The saw plate is taper-ground and gets progressively thinner (approx 0005 inches) from the teeth to the back of the saw this greatly reduced binding in the cuts. Saw plate is made from sheffield allow spring steel and taper ground providing a good balance of edge durability and ease of sharpening. 22″ saw plate has 10 tpi and filed for crosscutting.

 

DEWALT DW3524 7-14 Crosscut Saw Blade

DEWALT DW3524 7-1/4 Crosscut Saw Blade

DEWALT DW3524 7-1/4 Crosscut Saw Blade - Blade coating prevents rust and reduces friction. Fully hardened steel body prevents blade warping and binding. Thicker body provides increased durability in heavy-duty applications. Precision sharpened teeth for fast, smooth cuts and longer life.

 

Black Decker Crosscut Saw Blade

Black & Decker Crosscut Saw Blade

Black & Decker Crosscut Saw Blade - Impulse hardened teeth, spot hardening of blade teeth enhances cutting performance while maintaining flexibilty. Japanese style tempering, tempered to further harden and strengthen the blade and cutting edge. Piranha scorpion saw blade for wood 200mm the scorpion blades are made of the highest quality materials|superior precision/superior finish/superior life reinforced tooth design puts more steel behind each tooth for greater precision and longer blade life|ideal for general purpose usage wood, plywood (straight cut, curved and shapped cutting), plastic, metal|wood, plywood (straight cut, curved and shapped cutting), plastic, metal.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.