Coolest 16 Mortise Tenons

 

Emtek 86044 Mortise & Tenon 3-1/2″ Solid Brass Cabinet Pull from the Arts & Craf, Satin Nickel - Flat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing. Center handle cabinet pull. All-natural, solid sipo hardwood for strength and stability in outdoor applications where a strong joint is needed. Embossed with glue pockets, and is approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Serves as a true floating tenon in outdoor applications such as decks, exterior trim, and outdoor furniture.

 

MLCS Woodworking FLATBED Horizontal Router Table Mortise-Tenon Package - Benchtop table featuring micro-adjustable bit height adjustments. Makes tall auxiliary fences, multiple featherboards and jigs unnecessary. Includes 3-pc solid carbide spiral upcut bit set. Rout wide stock flat on the table for safety no more standing stock on edge. Perfect for vertical raised panels, mortise & tenon joinery, moldings, picture frames, etc.

 

Emtek 86044US15 Art & Crafts 3 1/2″ C-to-C Mortise & Tenon Pull – Satin Nickel - Cabinet pulls. Flutes on the stock increase the amount of glue surface. Save time by buying beadlock tenon stock in precut lengths of 1-1/2-inch, 2-inch, 2-1/2-inch. Stock is specially designed for our beadlock loose tenon joinery system (sold separately).

 

Rob Cosman “Hand-Cut Mortise & Tenon” DVD - Rob has also worked with many of the world’s best craftsmen, including alan peters, sam maloof, tage frid, monroe robinson and peter korn. Nish’s teaching assistant. In industrial technology/furniture design at brigham young university, he was dr. . Dale l. While earning a b. Rob cosman has been woodworking for most of his life. This 2 hour and 7 minute dvd features tools of the trade hand sharpening a tenon saw sharpening a mortise chisel from bench grinder to waterstone stock preparation and layout of the mortise and tenons chopping, sawing and fitting the mortise and tenon laying out the strong and decorative through wedged tenon and chopping, sawing and fitting the through wedged tenon. Sc.

 

Trend MT/JIG Mortise and Tenon Jig - Ideal for cabinet, chair and table construction. Quick, accurate and versatile jig allows you to cut perfect-fitting mortise and tenons with a plunge router, requires only one setup to cut both pieces. Includes all mounting hardware four f-style clamps mortise and tenon jig setup bar with guide bush and cutter selection chart plus seven guide bushings to create mortise and tenons 1/4″- 5/8″ thick. For use with 1/4″ shank straight router bits. With reversible template to produce round and square end tenons. Angle bar and main plate can be rotated from -10° to 45°. For 1/2″-2″ thick material maximum width 4″. Technical detailsfully adjustable for compound angle joints. Template can also be used for accurate doweling applications.

 

General Tools 870 E Z Pro Mortise and Tenon Jig - This product is easy to use easy to install and highly durable. This unit can easily handle wood stock ranging from `/2-inch to 1 1/2-inch thicknesses and can cut multiple mortises in a single long piece. Create 3/8-inch and 1/2-inch mortise and tenons. Compact and portable design for use in shop or at work sites made of solid 6063 aircraft grade aluminum. Included are the bushings for also producing 3/8″ and 1/2″ joints. This trailblazing tool provides a quick and easy, all-in-one solution to cut both a matching mortise and tenon with a single inexpensive jig. Includes 1/4-inch high speed upcut spiral bit, bushing guides for 1/4-inch 3/8-inch and 1/2-inch tenons. Integrated clamps and swing arms align and secure wood for accurate joints.

 

General Tools 870 E Z Pro Mortise and Tenon Jig by General Tools - This unit can easily handle wood stock ranging from `/2-inch to 1 1/2-inch thicknesses and can cut multiple mortises in a single long pieceintegrated clamps and swing arms align and secure wood for accurate joints. This trailblazing tool provides a quick and easy, all-in-one solution to cut both a matching mortise and tenon with a single inexpensive jigthis product is easy to use easy to install and highly durableincluded are the bushings for also producing 3/8 and 1/2 jointscompact and portable design for use in shop or at work sites made of solid 6063 aircraft grade aluminumcreate 3/8-inch and 1/2-inch mortise and tenonsincludes 1/4-inch high speed upcut spiral bit, bushing guides for 1/4-inch 3/8-inch and 1/2-inch tenons.

 

TREND MT/JIG/EURO MORTISE & TENON JIG EURO by Trend - Trend mt/jig/euro mortise & tenon jig euro. Storage case is molded with additional spacing for optional 1/4-inch and 1/2-inch drill block sizes. Beveled cutout in the drill plate allows you to precisely align the jig with your reference marks. Includes all necessary hardware for cutting 3/8-inch joints (tenon stock sold separately).

 

General Tools 870 E Z Pro Mortise and Tenon Jig by General Tools - Maximum stock size 3-1/4 inch | 90 degree positive stop for accurate cuts. Multi position control lever for easy adjustment | fits 3/8 inch x 3/4 inch miter slot. Fits left and right tilting table saws with 3/8 inch x 3/4 inch miter gage grooves. General tools 870 e z pro mortise and tenon jig. 90 degree to 45 degree backstop with adjustable 90 degree positive stop.

 

Leigh Super FMT Frame Mortise and Tenon Jig - Two f-style clamps and adjustable side-stop fence for tenoning. Universal sub-base attaches to virtually any plunge router. 5/16″ hss spiral upcut bit with 1/2″ shank (leigh# 170-500). 1/8″ hex driver, mounting hardware and illustrated user guide. Five 5/16″ joint guides (1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″) over 21 sizes of mortise & tenons.

 

Emtek 86045US15 Art & Crafts Brass 4″ C-to-C Mortise & Tenon Pull – Satin Nickel - Cabinet pulls. Easily converted to chisel plane or bull nose plane. For fine tuning mortise and tenon joints. Shoulder plane.

 

Emtek 86044 Mortise and Tenon 3-1/2 Inch Center to Center Handle Cabinet Pull fr, Oil Rubbed Bronze - Flat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing. All-natural, solid sipo hardwood for strength and stability in outdoor applications where a strong joint is needed. Center handle cabinet pull. Embossed with glue pockets, and is approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Serves as a true floating tenon in outdoor applications such as decks, exterior trim, and outdoor furniture.

 

Frame Mortise and Tenon Jig - This dvd includes 95 minutes of leigh joinery jigs in action, featuring additional information about each of the following leigh industries jigs and accessories d4r-24 dovetail jig, super jig dovetail jigs, f2, and f1600. The fmt offers excellent simplicity of set-up and ease of use, while giving incredible accuracy of fit. You don’t have to dedicate a router to the jig. It takes only a minute or two to install or remove the included router sub-base, so the router can be used elsewhere. Leigh’s frame mortise tenon jig (fmt) is an industrial strength tool for easy production, and reproduction, of mortise and tenon joints in an immense variety of sizes, styles and angles. Angles are easily set and changed regardless of number. The leigh fmt is the only mortise and tenon jig you will need, and set-up and use is fast and simple. Using the included 5/16″ guide set and bit you can cut up to 20 variations of a 5/16″ tenon, up to 1-1/2″ wide with a depth of 1″. With the addition of other guide sets you can expand your capacity to 1/4″, 3/8″ or 1/2″ tenons, in fact, 68 different sizes of matching mortise and tenon joints are easily achieved using only 21 guides. Possible sizes are nearly endless with the built in table movement. Adjustability goes beyond the possibilities presented by re-jigging for standard production mortise and tenons. Longer bits can increase tenon length to 2-1/8″. Dust extraction is through a 1-1/2″ connection at the rear of the jig. The basic fmt includes the universal router sub-base, five 5/16″ guides (to make over 20 sizes of mortises and tenons), guide stand, 5/16″ spiral up-cut bit with 1/2″ shank, two cam-action speed clamps, outrigger bars, adjustable side-stop fence, full illustrated user’s guide and screwdrivers and mounting hardware. For a complete demonstration of this product, order at no charge the leigh 2009 demonstration dvd. Maximum stock capacity is 3″ x 5″.

 

Festool PI574432 Domino Mortise and Tenon Joiner Set with CT MIDI HEPA 3.3 Gallon Mobile Dust Extractor - Includes domino df 500 q mortise and tenon joiner, 574332, ct midi 3. X 11. Antistatic suction hose, hepa filter, selfclean filter bag, domino cross stop set, domino trim stop, d5 domino cutter, support bracket, wrench, plug-it power cord. 3 gallon hepa mobile dust extractor, 584165, sys-2 t-loc systainer, 1 in. 5 ft.

 

Emtek 86276US15 Art & Crafts Brass 6″ C-to-C Mortise & Tenon Pull – Satin Nickel - Handles stock thicknesses of 3/4-inch and up includes all necessary hardware for cutting 3/8-inch joints. Cabinet pulls. What’s in the box beadlock pro jig 3/8-inch hss drill bit 3/8-inch stop collar 3/8-inch beadlock guide block 3/8-inch mortise paring guide block. Index lines on the guide block allow you to precisely align the jig with your reference marks. For more information on beadlock pro, see this blog post from popular woodworking magazine.

 

Mortise & Tenon - Stock is specially designed for our beadlock loose tenon joinery system (sold separately). Cabinet pulls. Flutes on the stock increase the amount of glue surface. Save time by buying beadlock tenon stock in precut lengths of 1-1/2-inch, 2-inch, 2-1/2-inch.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.