Dormer E064 Powdered Metal Thread Forming Tap, Gold Oxide Finish, Round Shank With Square End, Modified Bottoming Chamfer, #6-32 Thread Size
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Powdered metal substrate offers superior performance that approaches that of solid carbide tools but with the toughness and shock-reistance of high-speed steel.
Union Butterfield 3306E(UNC) High-Speed Steel Thread Forming Tap, Extra-Long, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, H5 Tolerance, 6 O’all Length, 3/8-16 Thread Size Size: 3/8-16, Model: 1321092
- Cold-forms threads in through holes and blind holes without producing chips. High-speed steel for compatibility with a variety of materials. Extension rol-form tap is extra-long for extended reach, with lubricant grooves to improve coolant. Available in unc (unified coarse) or unf (unified fine) right-hand thread options for different. Bottoming chamfer for threading the bottoms of blind holes.
Kodiak Cutting Tools KCT210208 USA Made Roll Thread Forming Threading Tap, Bottom Style, TiN Coated, High Speed Steel, H6 Limit, 10-24 Size
- 194″ shank 7/8 thread length 2-3/8″ overall length h6 limit thread forming roll threading tap. 10-24 thread forming tap.
OSG Tap And Die – 1405010808 – Tap, Right Hand, Thread Forming, 3/8-16, Powdered Metal, TiCN Finish
- This osg exotap® nrt® high-performance form tap is suitable for use with materials less than 32 rc. Black oxide finish offers mild corrosion resistance and lubricity. Steel is often used in applications where strength is the primary consideration. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Thread rolling screw recommended for use in plastic.
Titan TT92871 High Speed Steel Thread Forming Plug Tap, TIN Coated, 1/4″ – 20″, H3 Limit, 0.255″ Shank Diameter, 1″ Thread Length, 2-1/2″ Overall Length
- . Thread forming taps have no flutes or cutting edges and provide chipless tapping. For use with brass, copper, lead, stainless steels, carbon steel and leaded steel and zinc. Features include “lube grooves” for lubrication and venting in blind holes, and a tool life 3-4 times (or more) than cutting taps. Ductile materials producing stringy chips are a good candidate for forming.
Titan TT92808 High Speed Steel Thread Forming Bottom Tap, TIN Coated, 2″ – 56″, H2 Limit, 0.141″ Shank Diameter, 7/16″ Thread Length, 1-3/4″ Overall Length
- For use with brass, copper, lead, stainless steels, carbon steel and leaded steel and zinc. Features include “lube grooves” for lubrication and venting in blind holes, and a tool life 3-4 times (or more) than cutting taps. Thread forming taps have no flutes or cutting edges and provide chipless tapping. . Ductile materials producing stringy chips are a good candidate for forming.
#8-32 x 1/4 Coarse Thread Taptite Thread Forming Screw Phillips Hex Washer Head with Serration Low Carbon Steel Zinc Plated Pk 100
- Pictures are representative of item, but are not of the actual item product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc, may differ from picture products are guaranteed to meet the specifications to which they are manufactured specifications allow for tolerances in dimension and shape, which can vary from lot to lot. Please see the specifications in the table above for full details if you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order. All asmc industrial fasteners are fully traceable and lot-controlled. All asmc industrial fasteners are guaranteed to be of the highest quality.
Drillco 2000N Series High Speed Steel Thread Forming Nitro Hand Tap, Black Oxide Finish, Round with Square End Shank, Taper Chamfer, #2-56 UNC Thread (Pack of 12)
- Round shank with square end allows tap to be used in hand or power-driven applications. Black oxide finish improves lubricity, resists corrosion, and helps prevent buildup. High-speed steel is compatible with a variety of materials. Hand threading tap with straight flutes cuts threads in through holes and blind holes. Available in unc (unified coarse) and unf (unified fine) right-hand thread options for different applications.
North American Tool 19210 HSS Thread Forming Tap, Uncoated Bright Finish, Plug Chamfer, 6-1 M Thread Type, 2.5″ Length
- Thread size can be closely maintained. Taps have no flutes except as optionally designed with one or more lubrication grooves. Thread form is lobed so there is a finite number of points contacting the work. This tap forms threads, so it is chipless and will not cause a chip problem. These taps are made in the usa and their fluteless design allows high quality threads, faster tapping speeds, higher production and generates no chips, which simplifies tapping of blind bottoming holes where threads can be formed the full depth of the hole.
Morse Cutting Tools 36381 Thread Forming Taps, High-Speed Steel, Bright Finish, Bottoming Style, H3 Pitch Diameter Limit, #4-40 Size
- Recommended for a wide variety of ductile materials. Advantages include no chips to dispose of, stronger higher quality threads, increased tapping speeds, longer tap life and reduced tap breakage. Thread forming taps cold form rather than cut the threads. Lube grooves provide a path for lubrication and act as vents to relieve pressure in blind hole tapping.
Dormer Applix 1681AP High Speed Steel High Performance Thread Forming Multi-Application Lube Grooves Taps, TiN Coated, Round with Square End, Single-End, Semi Bottom, 1/2″ Size, 13 UNC TPI
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks with square end allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Single end. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Drillco 2000N Series 3 Piece Series High Speed Steel Thread Forming Nitro Hand Tap Set, Black Oxide Finish, Round with Square End Shank, 5/16″-18 UNC Thread (Pack of 1)
- Round shanks allow use with a wide variety of toolholding systems. Generates the thread to the bottom. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
Union Butterfield 3300(UNC) High-Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, H5 Tolerance, #6-32 Thread Size
- Available in unc (unified coarse) or unf (unified fine) right-hand thread options for different applications. Cold-forms threads in through holes and blind holes without producing chips. Rol-form design includes oil grooves in larger sizes to improve coolant flow. High-speed steel for compatibility with a variety of materials. Round shank with square end helps to minimize rotation in the tool holder.
ZFE 1Pc M6x1.0mm High-Speed Steel TiN Coated Metric Standard Thread Forming Tap Machine Tap Milling Taps Screw Tap
- Easily tapping to the botton of hole,excellent cutability. Round shank with square end,bottoming chamfer,h7 tolerance. New 6mm x 1 metric hss forming tap m6 x 10mm pitch. 1 pack of 1 pieces per size. Hss titanium coated metric standard thread forming taps,right hand.
Green Grounding Screws Hex 100 Pack Thread Forming Hex Ground Wire Attachment Multiple Tool Use Hex Head Flat or Phillips Head
- Hex ground wire attachment multiple tool use. Hex head flat or phillips head. Green grounding screws hex 100 pack thread forming.
Kodiak Cutting Tools KCT210527 USA Made Roll Thread Forming Threading Tap, Plug Style, TiN Coated, High Speed Steel, H5 Limit, 3/8-16 Size
- 3/8-16 thread forming tap. 381″ shank 1-1/4 thread length 2-15/16″ overall length h5 limit thread forming roll threading tap.
Titan TT82844 High Speed Steel Thread Forming Bottom Tap, Uncoated, 6″ – 32″, H7 Limit, 0.141″ Shank Diameter, 11/16″ Thread Length, 2″ Overall Length
- Ductile materials producing stringy chips are a good candidate for forming. For use with brass, copper, lead, stainless steels, carbon steel and leaded steel and zinc. Thread forming taps have no flutes or cutting edges and provide chipless tapping. Features include “lube grooves” for lubrication and venting in blind holes, and a tool life 3-4 times (or more) than cutting taps. .
Drillco 2000N Series 3 Piece Series High Speed Steel Thread Forming Nitro Hand Tap Set, Black Oxide Finish, Round with Square End Shank, #2-56 UNC Thread (Pack of 1)
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Generates the thread to the bottom. Round shanks allow use with a wide variety of toolholding systems. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
