Coolest 19 Arbor Presses

 

Dake 1 Model Single Leverage Arbor Press with Base Opening and Slotted Table Plate 3 Ton Capacity 115 Maximum Working Height 725 Length x 18 Width x 19 Height

Dake 1 Model Single Leverage Arbor Press with Base Opening and Slotted Table Plate, 3 Ton Capacity, 11.5″ Maximum Working Height, 7.25″ Length x 18″ Width x 19″ Height

Dake 1 Model Single Leverage Arbor Press with Base Opening and Slotted Table Plate, 3 Ton Capacity, 11.5″ Maximum Working Height, 7.25″ Length x 18″ Width x 19″ Height - Smooth action gears enable fine control over ram movement with the lever. Ram cap can be adjusted using the two included shims to compensate for wear. Open base and slotted table plate provide support for solid objects as well as an outlet for arbors and similar items to pass through. Lever lowers the ram to provide up to 3 tons of force. Adjustable handle can be positioned for a comfortable grip or to attain maximum leverage.

 

Arbor Press Magnetic Pin Press Chucking Tool

Arbor Press Magnetic Pin Press Chucking Tool

Arbor Press Magnetic Pin Press Chucking Tool - Key-less 3/8 inch chuck with internal back stop. Mathews engineering arbor press magnetic pin press chuck tool. Super strong niodymium magnetic base. Drill rod starter assortment includes 1/16″x15″, 3/32″x2″, 1/8″x2″, 1/4″x2″, 3/8″x2″. Pin chuck assures that the press pin is held perpendicular to the pressing force.

 

Kaka Industrial Mp-1 1 Ton Capacity Arbor Press

Kaka Industrial Mp-1 1 Ton Capacity Arbor Press

Kaka Industrial Mp-1 1 Ton Capacity Arbor Press - Do the pressing effortless by turning handles. Material max height 10 inches. Material max diameter 7 inches. 1 ton arbor press. Travel 5 inches.

 

Dayton 3Z949 Press Arbor 3 Ton

Dayton 3Z949 Press, Arbor, 3 Ton

Dayton 3Z949 Press, Arbor, 3 Ton - Price for each construction cast iron features removable 4 position rotating anvil, large-toothed rack a magnetic insert to hold the punch range of slot widths (in) 1 to 2 ram dimensions (in) 1-1/2 x 1-1/2&quot max work height (in) 12-1/4&quot item arbor press height (in) 21-1/4&quot ram hole dia x depth (in) 1/2 x 1&quot depth (in) 17-3/4&quot. Force in tons 3 base size (in) 9-1/2 x 17 3/4 width (in) 9-1/2&quot anvil dia work area (in) 6-5/8 table work surface (in) 8-1/8 x 8-1/2&quot swing (in) 12&quot country of origin (subject to change) china.

 

JET AP-5 5 Ton Arbor Press

JET AP-5 5 Ton Arbor Press

JET AP-5 5 Ton Arbor Press - Tables and slotted table-plates are flat and parallel to provide accurate support. Precision cut steel rams and pinions for accurate operation. For all production and assembly applications. Arbor presses.

 

KAKA Industrial AP-2S Arbor Press Adjust Press Height Jewelry Tools Solid Construction Easy Operation 2 Tons Arbor Press

KAKA Industrial AP-2S Arbor Press, Adjust Press Height Jewelry Tools, Solid Construction, Easy Operation 2 Tons Arbor Press

KAKA Industrial AP-2S Arbor Press, Adjust Press Height Jewelry Tools, Solid Construction, Easy Operation 2 Tons Arbor Press - Specificationmodel ap-2scapacity (kn) 20handle power (n) 200travel (in) 8″ +3-1/8″table size 8″x6″packing size 15x11x18″shipping weight 51 lbs. About kaka industrial a company delivers high quality products with fast shipment and lowest price possible. We always fulfill what we have promised kaka industrial ap-2s arbor press overview the 2 ton arbor press is a great product for making jewelry tools and many more. Solid construction will guarantee a long term service life. It is also easy to adjust the working height with the handle. The bench type makes it easy to use. 2 ton capacity allows more leverage when its in use.

 

Dake 11-12 Table Distance 3 Ton Capacity Ratchet Lever Arbor Press

Dake 11-1/2″ Table Distance 3 Ton Capacity Ratchet Lever Arbor Press

Dake 11-1/2″ Table Distance 3 Ton Capacity Ratchet Lever Arbor Press - Price for each construction cast iron features removable 4 position rotating anvil, large-toothed rack a magnetic insert to hold the punch range of slot widths (in) 1 to 2 ram dimensions (in) 1-1/2 x 1-1/2&quot max work height (in) 12-1/4&quot item arbor press height (in) 21-1/4&quot ram hole dia x depth (in) 1/2 x 1&quot depth (in) 17-3/4&quot. Dake 11-1/2″ table distance 3 ton capacity ratchet lever arbor press.

 

Dake 00 Model Single Leverage Arbor Press with Base Opening and Slotted Table Plate 1 Ton Capacity 5 Maximum Working Height 425 Length x 9 Width x 9375 Height by Dake

Dake 00 Model Single Leverage Arbor Press with Base Opening and Slotted Table Plate, 1 Ton Capacity, 5 Maximum Working Height, 4.25 Length x 9 Width x 9.375 Height by Dake

Dake 00 Model Single Leverage Arbor Press with Base Opening and Slotted Table Plate, 1 Ton Capacity, 5 Maximum Working Height, 4.25 Length x 9 Width x 9.375 Height by Dake - Lever lowers the ram to provide up to 1 ton of forceadjustable handle can be positioned for a comfortable grip or to attain maximum leverageram cap can be adjusted using the two included shims to compensate for wearsmooth action gears enable fine control over ram movement with the leveropen base and slotted table plate provide support for solid objects as well as an outlet for arbors and similar items to pass through.

 

Dayton 5Z077 Press Arbor 4 Ton

Dayton 5Z077 Press, Arbor, 4 Ton

Dayton 5Z077 Press, Arbor, 4 Ton - Price for each construction cast iron features removable 4 position rotating anvil, large-toothed rack a magnetic insert to hold the punch range of slot widths (in) 3/4 to 2-3/4 ram dimensions (in) 1-3/4 x 1-3/4&quot max work height (in) 15-3/4&quot item arbor press height (in) 27-1/4&quot ram hole dia x depth (in) 1/2 x 1&quot depth (in) 21-1/8&quot. Force in tons 4 base size (in) 10-3/4 x 21-&quot/8 width (in) 10-3/4&quot anvil dia work area (in) 9-1/2 table work surface (in) 10 x 10-1/4&quot swing (in) 16-3/4&quot country of origin (subject to change) china.

 

Palmgren AP30 3 Ton Arbor Press

Palmgren AP30 3 Ton Arbor Press

Palmgren AP30 3 Ton Arbor Press - The base is machined to hold the three bit set. Includes three piece bit set, 1 pointed, 1 round, and 1 square end bit, and a removable steel anvil. Sturdy, cast-iron construction. Rugged steel ram is driven by a machined pinion. Base drilled for mounting on a bench or pedestal.

 

Heavy Duty Arbor Press 12 Ton

Heavy Duty Arbor Press 1/2 Ton

Heavy Duty Arbor Press 1/2 Ton - This is a four position anvil. This press has heavy stud teeth, heavy casings, steel rams, and steel pinions. The cap over table is 4-1/2 inch and the ram is 7-1/2 inch. This 1/2 ton arbor press is 10 inch in height and has a 6-1/2 inch max work diameter. The ratcheting presses puts the lever arm in the most comfortable position for final application of force. The largest arbor is 1 inch.

 

Dayton 1UH15 Stand Arbor Press

Dayton 1UH15 Stand, Arbor Press

Dayton 1UH15 Stand, Arbor Press - Price for each base size (in) 11 13/16x 22 1/4 height (in) 358125 features slot to accommodate pieces that need to extend below the base of the press table, handle all of the dayton arbor presses item optional floor stand width (in) 118 depth (in) 2225 anvil dia work area (in) 22-1/4 country of origin (subject to change) china. Height 10″. Maximum ht capacity 4. 4-position anvil. Maximum work diameter 6 1/2″.

 

Dake 1-12B Model Ratchet Leverage Arbor Press with Handwheel and Counterweight 3 Ton Capacity 1825 Maximum Working Height 825 Length x 21 Width x 28 Height

Dake 1-1/2B Model Ratchet Leverage Arbor Press with Handwheel and Counterweight, 3 Ton Capacity, 18.25″ Maximum Working Height, 8.25″ Length x 21″ Width x 28″ Height

Dake 1-1/2B Model Ratchet Leverage Arbor Press with Handwheel and Counterweight, 3 Ton Capacity, 18.25″ Maximum Working Height, 8.25″ Length x 21″ Width x 28″ Height - Open base and slotted table plate provide support for solid objects as well as an outlet for arbors and similar items to pass through. Handwheel quickly advances the ram for initial positioning, and the ratcheted lever lowers the ram onto the object and can be set at a comfortable position for the user. Smooth action gears enable fine control over ram movement with the lever. Ratcheted lever lowers the ram to provide up to 3 tons of force. Counterweight repositions the lever to the top after a downstroke to reduce strain and quickly prepare for the next task.

 

12 Ton Arbor Press

1/2 Ton Arbor Press

1/2 Ton Arbor Press - Heavy castings. Steel rams + pinion. Heavy stub teeth. Precision made the “maximum work diameter” dimension is twice the distance from the center of the ram to the back of the throat.

 

JET AP-2 2 Ton Arbor Press

JET AP-2 2 Ton Arbor Press

JET AP-2 2 Ton Arbor Press - Precision cut steel rams and pinions for accurate operation. Tables and slotted table-plates are flat and parallel to provide accurate support. For all production and assembly applications. Arbor presses.

 

Dake Y Model Single Leverage Arbor Press with Solid Plate 15 Ton Capacity 775 Maximum Working Height 6 Length x 15 Width x 145 Height

Dake Y Model Single Leverage Arbor Press with Solid Plate, 1.5 Ton Capacity, 7.75″ Maximum Working Height, 6″ Length x 15″ Width x 14.5″ Height

Dake Y Model Single Leverage Arbor Press with Solid Plate, 1.5 Ton Capacity, 7.75″ Maximum Working Height, 6″ Length x 15″ Width x 14.5″ Height - Smooth action gears enable fine control over ram movement with the lever. Adjustable handle can be positioned for a comfortable grip or to attain maximum leverage. Solid base and table fully support the object being pressed. Lever lowers the ram to provide up to 1-1/2 tons of force. Ram cap can be adjusted using the two included shims to compensate for wear.

 

1 Ton Arbor Press

1 Ton Arbor Press

1 Ton Arbor Press - The “maximum work diameter” dimension is twice the distance from the center of the ram to the back of the throat. Heavy castings. Precision made. Steel rams + pinion. . Heavy stub teeth.

 

Palmgren Arbor press 2 ton

Palmgren Arbor press, 2 ton

Palmgren Arbor press, 2 ton - The ram is reversible with one end solid and the other end with a hole and magnet to hold bits and tools. 01 swing 10- 3/8 in anvil diameter 6- 3/4 in max work height 7- 7/8 in ram dimensions 1- 1/4 x 1- 1/4 in height 15- 1/8 in base dimensions 8- 16 in weight 70 lb [/custom1]. Sturdy, cast-iron construction rugged steel ram is driven by a machined pinion base drilled for mounting on a bench or pedestal includes three piece bit set, 1 pointed, 1 round and 1 square end bit, and a removable steel anvil the base is machine to hold the three bit set   [custom1] specification description model ap20 force 2. Removable machined steel anvil provides accurate work support in four slot positions. Punches or tools may be added to the end of the ram with the aid of a magnetic insert. Delivers the heavy force needed for riveting, squeezing, punching, bending, and other pressing applications. A lockable fine adjustment adjusting screw accurately limits the depth of the ram stroke. Depth stop securely clamps to the ram and withstands full pressure. 0 ton lever ratio 19.

 

Dayton 4Z328 Press Arbor 1 Ton

Dayton 4Z328 Press, Arbor, 1 Ton

Dayton 4Z328 Press, Arbor, 1 Ton - Depth (in) 10-1/2&quot force in tons 1 base size (in) 6-1/8 x 10-1/2&quot width (in) 6-1/8&quot anvil dia work area (in) 4-1/2 table work surface (in) 5-3/4 x 4-1/4&quot swing (in) 8&quot country of origin (subject to change) china. Price for each construction cast iron features removable 4 position rotating anvil, large-toothed rack, speed wheel for repetitive pressing applications a magnetic insert to hold the punch range of slot widths (in) 45/64 to 1-27/64 ram dimensions (in) 1 x 1&quot max work height (in) 6&quot item arbor press height (in) 11&quot ram hole dia x depth (in) 1/2 x 1&quot.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.