Coolest 19 Psi Woodworkings

 

PSI Woodworking LCBEAD4 4 Piece HSS Bead Cutting Lathe Chisel Set - This set includes tools to create 3mm, 6mm, 8mm and 10mm beads. Packaged in an attractive wood carrying case. The tools are about 14″ long with hss blades and hardwood handles. Turn beads like at expert take the mystery and skill out of cutting perfect beads to exact sizes with this 4 piece hss bead cutting chisel set. Produces excellent well formed beads you can be proud of. .

 

PSI Woodworking Long Ranger -III Remote - Turn on a dust collector from anywhere in the shop. Grounded with reset button. Programmable. Extra remote handpiece for long ranger 3. Uses rf signal.

 

PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck System - Includes step jaws, round jaws, and pin jaws. Holds workpiece from 5/8-to-2-inch inside hole diameter. Weighs only 12 pounds with a 2-1/8-inch outside diameter. Mounts to 3/4-inch-by-16 tpi & also adapts to 1-inch-by-8 tpi. Holds dowell from 1/4-inch up to 1-1/2-inch outside diameter.

 

PSI Woodworking PKCPBAPAK 30 Caliber Bolt Action Bullet Cartridge Pen Kit Starter Package - You will also get the 2-pc bushing set and a 3/8″ hss drill bit. Each kit also has a bolt action rifle clip, replica 30 caliber cartridge, and a rose gold bullet tip. Eack kit uses our patented bolt action handle that smoothly advances and retracts to securely lock the refill in place. You get (1) of each of the following finishes in our 30 caliber bolt action bullet cartridge pen kit 24kt gold, chrome, gun metal. Pen blanks are sold separately.

 

PSI Woodworking DBGULP Big Gulp Dust Hood - Dust hood with a 13-by-16-inch opening. Weighs 22 pounds. 4-inch port to connect to any dust collection system. Perfect for miter saws, lathes, radial arm saws, carving, sanding, and planers without hoods. Lightweight and portable made from tough abs plastic.

 

PSI Woodworking LCHSS8 HSS Wood Lathe Chisel Set, 8-Piece - Comes with beautifully turned 10-3/4-inch hardwood handles in an attractive wood display box. The m2 high speed steel 5-1/4-inch blades outlast high carbon steel 6-to-1 and will give you years of use. Set includes 8 essential chisels 3/16-inch parting tool, 5/8-inch spear scraper, 1-inch skew chisel, 5/8-inch skew chisel, 5/8-inch round nose scraper, 1/2-inch bowl gouge, 3/4-inch spindle gouge, 7/8-inch roughing gouge. Ideal kit for turning small pens, spindles, bowls and larger projects. Super value for all turners.

 

PSI Woodworking CJAM10C Expanding Jam Chuck Set, 5 Piece - 1-1/4″ long with 1/4″ shank. Chuck sizes 3/4″, 1″, 1-1/4″, 1-1/2″, 2″. Ideal solution for securing small turning projects with hollow centers. Chuck expands by turning nut to secure work piece. Works perfect with cjam10f 5-piece forstner bit set to drill out jam chuck holes.

 

PSI Woodworking KWL-1218VS Turn Crafter Commander 12″ Variable Speed Midi Lathe - Tailstock & spindle bore 3/8″ quill travel 1-5/8″ (24) indexing positions with spindle locking convenient built-in handles. Headstock thread 1″ x 8tpi headstock/tailstock taper #2mt distance between centers 18″ swing over bed 12″ cast iron base. See description below for all of the included parts. Kwl-1218vs replaces tclc12vs etl listed and certified by intertek. Powered by 1hp variable speed high performance induction motor(120v-60hz) & an sbc microprocessor two belt positions 500-1800 rpm & 1950-3800 rpm.

 

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck - The provided step jaws reverse for extra versatility when securing the work piece from the outside, or inside. This self centering, 3 jaw micro chuck is ideal for holding small projects from the inside or outside. 2 pounds. Pre cut with a 1″ x 8 tpi standard thread mount, and includes an adapter for 3/4″ x 16 tpi spindles. Holds a workpiece from 3/4″ to 2-1/2″ inside diameter, and a workpiece from zero to 1-1/4″ outside diameter. Weighs only 1. The smaller diameter offers a safety feature keeping your knuckles away from the jaws when working close to the chuck. Uses small levers to open and tighten the three jaws.

 

PSI Woodworking BARR6JAW 6 Jaw Heavy Duty Self-Centering Lathe Chuck System - Includes (6) #2 round dovetail jaws & screw chuck. Grabs more surface area of a larger diameter turning base than 4-jaw chucks. Outside grip is 2-1/2″ to 3-1/4″ inside grip is 2″ x 2-3/4″. Opens and closes with included levers 3mm hex wrench also included. Threaded to 1-1/4″ x 8tpi includes 1″ x 8tpi spindle adapter.

 

PSI Woodworking TM21 3/8 inch Diameter Drill Chuck with 1 Morse Taper Mount - Includes #1 morse taper arbor for mounting in lathe headstock or tailstock. Tightens with a chuck included) for excellent grip. Accepts a 1/4-20″ draw bolt for safety. 3/8″ diameter 3-jaw mechanism can be used for securing small turnings or pen mandrels at the headstock, or a drill bit in the tailstock. Removed easily with a knock-out bar.

 

PSI Woodworking LCENT3210 Super 4-Prong Spring-Loaded Drive Center #2MT, - Spring-loaded center point helps avoid splitting your work piece. 1″ diameter with #2mt. Spring-loaded center point retracts when tailstock pressure is applied. Sharp spurs give a strong bite into wood work piece. Spring-loaded center point simplifies positioning of your spindle.

 

PSI Woodworking D50C 4-Inch by 50-Feet Clear Flexible Dust Collection Hose - Self-grounding, attache to dust collection system. Flexible hose adds versatility to uses and placement. Strong and durable construction. Will not collapse, even under heavy suction. Reinforced grounding wire is 0050-inch thick.

 

PSI Woodworking DLHOODC2 Clear Wood Lathe Dust Hood With Magnetic Mounting Clamp - Protects the turner from flying debris, or can swing viewing screen out of the way. It is ideal for small projects and pen crafting. The hood has a 6-by-9-inch clear opening. Designed with a standard 4-inch male dust collector hose flange. Allows instant mounting and positioning along the length of any mini or midi lathe made of iron.

 

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System - Includes #3 round jaws, external grip 3-1/16-to-4-3/8-inch. Includes #1 step jaws for dowels 3/32-to-1-3/8-inch, holes 11/16-to-2-3/8-inch. Includes four (4) self-centering jaw sets to hold round and square stock for turning, pre-threaded for 1x8tpi, and has an adapter for 3/4x16tpi spindles. Includes pin jaws which hold inside holes 1-to-2-1/4-inch, and a screw chuck. Includes #2 round jaws, for dowels 7/8-to-1-1/2-inch holes 1-1/4-to-2-inch.

 

PSI Woodworking LXMSET 4 Bit Carbide Multi Cutter Chisel Set - , Blade is 6 in. Includes a chip deflector that magnetically attaches to the blade. Use the 2 in. Square, 3/8 in. Radius, 3/8 in. With this system you will save time and money while increasing productivity and eliminating sharpening. Simply swap out the cutter for a different application or purchase an extra handle for the convenience of having a dedicated tool. The carbide bits are guaranteed to last 20 times longer than high speed steel and will help you produce an incredibly smooth finish that barely needs any sanding. The 3/8 in. Features a long handle for turning comfort. Overall length is 18 in. Round bit works well to shape handles with curves and to hollow bowls or cut coves and other rounded shapes. The square bit leaves work piece perfectly straight. You get four chisels in one with this all-inclusive chisel system. These four profiles span nearly all woodturning applications. Use the 3/8 in. Use the 3/8 in. Use the radius bit to rough and remove wood and round spindles. With your carbide multi bit chisels you will easily turn remarkably smooth cuts on even the most challenging plastic blanks. Round bit to turn a profile on a work piece. The radius bit is capable of forming large curves on handles ideal for pen barrels. Also use the detail diamond bit to cut tenons and as a parting tool. If you’d rather use the chisel at an angle, simply rotate the bit in the holder so the base of the blade is round. The flat surface on the tool handle blade lets you easily slide over the tool rest for straight and level cuts. Round and detail diamond carbide cutter. Use the detail diamond bit to carve coves and beads for intricate decorative spindle work. Includes the chisel plus the 2 in. Each chisel includes replaceable carbide cutter bits that you can easily insert. Use the square bit to rough a straight work piece to round.

 

PSI Woodworking LCMINI2 Mini 5-Piece HSS Wood Lathe Chisel Turning Set - Fantastic buy for five essential chisels. Includes-1/4-inch roughing gouge, 1/8-inch spindle gouge,-1/4-inch round nose scraper, 3/32-inch parting tool,-1/4-inch skew chisel. Chisels are 10-inch in overall length, with 4-inch blades. Comes in an attractive wooden display box. Premium long lasting hss blades with beautifully turned and stained hardwood handles and brass ferrules.

 

PSI Woodworking TM42 Headstock Mount Lathe Drill Chuck - The precision chuck has a 1/2″ x 20 tpi female thread, and comes with a chuck key, and an adapter to fit a 1″ x 8 tpi spindle. The jaws will open to fit a 1/2″ drill bit. This 1/2″ drill chuck can be mounted directly on the headstock spindle of your lathe. It is perfect for the lathe that does not have a morse taper mount.

 

PSI Woodworking PKMS1SET Pen Mandrel Saver Package #1MT, - No need for the knurled nut that sometimes gets lost, misplaced, or stripped. Includes 7mm drill bit, (5) 7mm bushings, #1mt mandrel saver tailstock center, & #1mt basic mandrel. System adapts to the length of your project. Great for turners of all skill levels. Perfect system to avoid bent mandrel shafts and ruining the point on your live center.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.