Top 12 Dovetail With Routers

 

Magnate 484 Dovetail Router Bits - With Top Bearing - 7 Degree 34 Cutting Diameter

Magnate 484 Dovetail Router Bits – With Top Bearing – 7 Degree; 3/4″ Cutting Diameter

Magnate 484 Dovetail Router Bits – With Top Bearing – 7 Degree; 3/4″ Cutting Diameter - The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Excessive overall length may cause tool damage. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. In case a bit doesn’t come with a speed chart. You may try the following suggestion. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is also equipped with wide open gullets for easy disposal of wood chips. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is suited for softwoods, hardwoods, chipboard, plywood and etc.

 

Freud 22-134 34-Inch Diameter 14-Degree Dovetail Router Bit with 12-Inch Shank by Freud

Freud 22-134 3/4-Inch Diameter 14-Degree Dovetail Router Bit with 1/2-Inch Shank by Freud

Freud 22-134 3/4-Inch Diameter 14-Degree Dovetail Router Bit with 1/2-Inch Shank by Freud - Freud 22-134 3/4-inch diameter 14-degree dovetail router bit with 1/2-inch shank. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

Amana Tool 45469 Keller Dovetail Carbide Tipped Router Bit for Keller No 1641 with Upper Ball Bearing 14-Inch Shank

Amana Tool 45469 Keller Dovetail Carbide Tipped Router Bit for Keller No. 1641 with Upper Ball Bearing, 1/4-Inch Shank

Amana Tool 45469 Keller Dovetail Carbide Tipped Router Bit for Keller No. 1641 with Upper Ball Bearing, 1/4-Inch Shank - Specifically designed to match keller number 1641, 7-degree angle. Cutting diameter 615-inch, 1/2-inch cutting height. 1/4-inch shank, 2-flute carbide tipped, industrial quality. Maximum rpm = 18,000. 19/32-inch upper radius, 5/32-inch lower radius.

 

Magnate 486 Dovetail Router Bits - With Top Bearing - 14 Degree 34 Cutting Diameter

Magnate 486 Dovetail Router Bits – With Top Bearing – 14 Degree; 3/4″ Cutting Diameter

Magnate 486 Dovetail Router Bits – With Top Bearing – 14 Degree; 3/4″ Cutting Diameter - Excessive overall length may cause tool damage. In case a bit doesn’t come with a speed chart. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. You may try the following suggestion. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits.

 

Yonico 14111q 10 Degree Dovetail Joint Router Bit with 14 Shank 12

Yonico 14111q 10 Degree Dovetail Joint Router Bit with 1/4″ Shank, 1/2″

Yonico 14111q 10 Degree Dovetail Joint Router Bit with 1/4″ Shank, 1/2″ - 10° x 1/2″ cutting diameter x 1/2″ height. The yonico 14111q 10° dovetail router bit can be used with a dovetail jig for half-blind dovetail joints or can be used together with dado bits to produce through-dovetail joints. 2 flute carbide cutters and 1/4″ shank.

 

Magnate 489 Dovetail Router Bit With Top Bearing- 14 Degree 1-18 Cutting Diameter

Magnate 489 Dovetail Router Bit With Top Bearing- 14 Degree; 1-1/8″ Cutting Diameter

Magnate 489 Dovetail Router Bit With Top Bearing- 14 Degree; 1-1/8″ Cutting Diameter - This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is also equipped with wide open gullets for easy disposal of wood chips. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. You may try the following suggestion. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage. It is suited for softwoods, hardwoods, chipboard, plywood and etc. In case a bit doesn’t come with a speed chart. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning.

 

Yonico 14112 14 Degree Dovetail Joint Router Bit with 12 Shank 916

Yonico 14112 14 Degree Dovetail Joint Router Bit with 1/2″ Shank, 9/16″

Yonico 14112 14 Degree Dovetail Joint Router Bit with 1/2″ Shank, 9/16″ - 2 flute carbide cutters and 1/2″ shank. The yonico 14112 14° dovetail router bit can be used with a dovetail jig for half-blind dovetail joints or can be used together with dado bits to produce through-dovetail joints. 14° x 9/16″ cutting diameter x 1/2″ height.

 

Freud 22-106 34-Inch Diameter 7-Degree Dovetail Router Bit with 14-Inch Shank Style 34-Inch Diameter 7-Degree Dovetail Router Bit with 14-Inch Shank Model 22-106

Freud 22-106 3/4-Inch Diameter 7-Degree Dovetail Router Bit with 1/4-Inch Shank Style: 3/4-Inch Diameter 7-Degree Dovetail Router Bit with 1/4-Inch Shank Model: 22-106

Freud 22-106 3/4-Inch Diameter 7-Degree Dovetail Router Bit with 1/4-Inch Shank Style: 3/4-Inch Diameter 7-Degree Dovetail Router Bit with 1/4-Inch Shank Model: 22-106 - Individually computer balanced. Covered by freud’s limited lifetime warranty. Kickback reducing design. Precision ground for the smoothest cuts.

 

Freud 22-124 12-Inch Diameter 14-Degree Dovetail Router Bit with 14-Inch Shank

Freud 22-124 1/2-Inch Diameter 14-Degree Dovetail Router Bit with 1/4-Inch Shank

Freud 22-124 1/2-Inch Diameter 14-Degree Dovetail Router Bit with 1/4-Inch Shank - Precision ground for the smoothest cuts. Individually computer balanced. Covered by freud’s limited lifetime warranty. Kickback reducing design.

 

Whiteside Router Bits D14-55 Dovetail Bit with 12-Inch Large Diameter and 12-Inch Cutting Length

Whiteside Router Bits D14-55 Dovetail Bit with 1/2-Inch Large Diameter and 1/2-Inch Cutting Length

Whiteside Router Bits D14-55 Dovetail Bit with 1/2-Inch Large Diameter and 1/2-Inch Cutting Length - Made in america. Whiteside machine company. Whiteside machine company was founded in 1970 as a general purpose machine shop in the basement of bill & bobbie whiteside’s home. Committed to quality. Family owned and operated. Come on, give us a try. Several woodworking magazines have tested whiteside versus the competition and selected whiteside as the winner for best router bits available in the market. Manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Located in western north carolina near the furniture manufacturing town of hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. Whiteside’s quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. Whiteside machine company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. As always, whiteside machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts along with rigid quality control, vital customer feedback and extensive field testing. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Ft. Today, whiteside machine occupies a 40,000 sq.

 

Task Tools T24216 Dovetail Router Bit with 14-Inch Shank 12-Inch by 12-Inch Carbide Height 14 Degree

Task Tools T24216 Dovetail Router Bit with 1/4-Inch Shank, 1/2-Inch by 1/2-Inch Carbide Height, 14 Degree

Task Tools T24216 Dovetail Router Bit with 1/4-Inch Shank, 1/2-Inch by 1/2-Inch Carbide Height, 14 Degree - Non-stick powder coat finish reduces friction and resin build-up to protect from corrosion. 14-degree angle dovetail router bit with 1/4-inch heat-treated, hardened steel shank double flute for quick cuts. Size 1/2-inch diameter by 1/2-inch carbide height. Dynamically balanced up to 24,000 rpm to reduce vibration and kickback. Premium quality super fine grain tungsten carbide for an exceptionally smooth finish.

 

Magnate 483 Dovetail Router Bits - With Top Bearing - 7 Degree 58 Cutting Diameter

Magnate 483 Dovetail Router Bits – With Top Bearing – 7 Degree; 5/8″ Cutting Diameter

Magnate 483 Dovetail Router Bits – With Top Bearing – 7 Degree; 5/8″ Cutting Diameter - It is suited for softwoods, hardwoods, chipboard, plywood and etc. Excessive overall length may cause tool damage. You may try the following suggestion. It is also equipped with wide open gullets for easy disposal of wood chips. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. In case a bit doesn’t come with a speed chart. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.